Department of Engineering

Dr Chris Cleaver - Publications

Number of items: 18.

Article

Russo, IM and Cleaver, CJ and Allwood, JM (2021) Seven principles of toolpath design in conventional metal spinning. Journal of Materials Processing Technology, 294. ISSN 0924-0136

Cleaver, CJ and Lohmar, J and Tamimi, S (2021) Limits to making L-shape ring profiles without ring growth. Journal of Materials Processing Technology, 292. ISSN 0924-0136

Lohmar, J and Cleaver, CJ and Allwood, JM (2020) The influence of constraint rolls on temperature evolution and distribution in radial ring rolling. Journal of Materials Processing Technology, 282. ISSN 0924-0136

Russo, IM and Cleaver, CJ and Loukaides, EG and Allwood, JM (2020) Raising by spinning. CIRP Annals, 69. pp. 277-280. ISSN 0007-8506

Russo, IM and Cleaver, CJ and Allwood, JM and Loukaides, EG (2019) The influence of part asymmetry on the achievable forming height in multi-pass spinning. Journal of Materials Processing Technology, 275. ISSN 0924-0136

Cleaver, CJ and Allwood, J (2019) Curvature Development in Ring Rolling. Journal of Materials Processing Technology, 267. pp. 316-337. ISSN 1873-4774 (Unpublished)

Horton, PM and Allwood, JM and Cleaver, C (2019) Implementing material efficiency in practice: A case study to improve the material utilisation of automotive sheet metal components. Resources, Conservation and Recycling, 145. pp. 49-66. ISSN 0921-3449

Horton, PM and Allwood, JM and Cleaver, C and Nagy-Sochacki, A (2019) An experimental analysis of the relationship between the corner, die and punch radii in forming isolated flanged shrink corners from Al 5251. Journal of Materials Processing Technology, 278. ISSN 0924-0136

Allwood, JM and Cleaver, CJ and Loukaides, EG and Music, O and Nagy-Sochacki, A (2019) Folding-shearing: Shrinking and stretching sheet metal with no thickness change. CIRP Annals, 68. pp. 285-288. ISSN 0007-8506

Cleaver, C and Allwood, J (2017) Incremental profile ring rolling with axial and circumferential constraints. CIRP Annals, 66. pp. 285-288. ISSN 0007-8506 (Unpublished)

Arthington, MR and Cleaver, CJ and Huang, J and Duncan, SR (2016) Curvature control in radial-axial ring rolling. IFAC-PapersOnLine, 49. pp. 244-249.

Cleaver, CJ and Arthington, MR and Mortazavi, S and Allwood, JM (2016) Ring rolling with variable wall thickness. CIRP Annals - Manufacturing Technology, 65. pp. 281-284. ISSN 0007-8506

Conference or Workshop Item

Cleaver, CJ and Allwood, JM (2021) Achieving an Interference Fit Between Two Rings During Composite Ring Rolling. In: UNSPECIFIED pp. 2381-2393..

Russo, IM and Cleaver, CJ and Allwood, JM (2019) Haptic metal spinning. In: SheMet - International Conference on Sheet Metal, 2019-4-15 to 2019-4-17 pp. 129-136..

Cleaver, CJ and Allwood, JM (2017) Incremental ring rolling to create conical profile rings. In: 12th ICTP 2017, 2017-9-17 to 2017-9-22 pp. 1248-1253..

Arthington, MR and Cleaver, C and Allwood, J and Duncan, S (2015) Measurement and control of variable geometry during ring rolling. In: UNSPECIFIED pp. 1448-1454..

Arthington, MR and Cleaver, C and Allwood, J and Duncan, S (2014) Real-time measurement of ring-rolling geometry using low-cost hardware. In: UNSPECIFIED pp. 603-608..

Gutowski, T and Taplett, A and Allen, A and Banzaert, A and Cirinciore, R and Cleaver, C and Figueredo, S and Fredholm, S and Gallant, B and Jones, A and Krones, J and Kudrowitz, B and Lin, C and Morales, A and Quinn, D and Roberts, M and Scaringe, R and Studley, T and Sukkasi, S and Tomczak, M and Vechakul, J and Wolf, M (2008) Environmental Life Style Analysis (ELSA). In: UNSPECIFIED pp. 183-187..

This list was generated on Tue Jan 18 17:21:24 2022 GMT.