Department of Engineering

Prof. David Cebon - Publications

Number of items: 313.

Article

Xu, C and Cebon, D (2017) Foundation voiding in jointed plain concrete pavements. Journal of Engineering Mechanics, 143. ISSN 0733-9399

Cebon, D and Rimmer, AJ (2017) Implementation of Reversing Control on a Doubly Articulated Vehicle. Journal of Dynamic Systems, Measurement and Control, 139. ISSN 0022-0434 (Unpublished)

Nicolaides, D and Cebon, D and Miles, J (2017) Prospects for Electrification of Road Freight. IEEE Systems Journal. ISSN 1932-8184

Midgley, WJB and Cebon, D (2017) Evaluation of a fuel-efficient urban delivery vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 095440701668951-095440701668951. ISSN 0954-4070

Morrison, G and Cebon, D (2016) Sideslip estimation for articulated heavy vehicles at the limits of adhesion. Vehicle System Dynamics, 54. pp. 1601-1628.

Henderson, L and Cebon, D (2016) Full-scale testing of a novel slip control braking system for heavy vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 230. pp. 1221-1238. ISSN 0954-4070

Rimmer, AJ and Cebon, D (2016) Theory and practice of reversing control on multiply-articulated vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 230. pp. 899-913. ISSN 0954-4070

Wilson, G and Morrison, G and Midgley, W and Cebon, D (2016) Relationship between heavy vehicle speed limit and fleet fuel consumption on minor roads. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230. pp. 1461-1478. ISSN 0954-4062

Stettler, MEJ and Midgley, WJB and Swanson, JJ and Cebon, D and Boies, AM (2016) Greenhouse Gas and Noxious Emissions from Dual Fuel Diesel and Natural Gas Heavy Goods Vehicles. Environ Sci Technol, 50. pp. 2018-2026.

Miller, JI and Cebon, D (2016) Tyre curve estimation in slip-controlled braking. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 230. pp. 332-351. ISSN 0954-4070

Morrison, G and Cebon, D (2016) Combined emergency braking and turning of articulated heavy vehicles. Vehicle System Dynamics, 55. pp. 725-749.

Portillo, O and Cebon, D (2016) Fracture mechanics of idealised bituminous mixes. International Journal of Pavement Engineering, 17. pp. 103-122. ISSN 1029-8436

Midgley, WJB and Cebon, D (2015) Control of a hydraulic regenerative braking system for a heavy goods vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 230. pp. 1338-1350.

Rimmer, AJ and Cebon, D (2015) Planning Collision-Free Trajectories for Reversing Multiply-Articulated Vehicles. IEEE Transactions on Intelligent Transportation Systems, 17. pp. 1998-2007.

Galos, J and Sutcliffe, M and Cebon, D and Piecyk, M and Greening, P (2015) Reducing the energy consumption of heavy goods vehicles through the application of lightweight trailers: Fleet case studies. Transportation Research Part D: Transport and Environment, 41. pp. 40-49. ISSN 1361-9209

Jia, Y and Cebon, D (2015) Field Testing of a Cyclist Collision Avoidance System for Heavy Goods Vehicles. IEEE Transactions on Vehicular Technology, 65. pp. 4359-4367.

Roebuck, R and Odhams, A and Tagesson, K and Cheng, C and Cebon, D (2014) Implementation of trailer steering control on a multi-unit vehicle at high speeds. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 136. ISSN 0022-0434

Costanzi, M and Cebon, D (2014) Generalized phenomenological model for the viscoelasticity of idealized asphalts. Journal of Materials in Civil Engineering, 26. pp. 399-410. ISSN 0899-1561

Morrison, G and Roebuck, RL and Cebon, D (2014) Effects of longer heavy vehicles on traffic congestion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228. pp. 970-988. ISSN 0954-4062

Portillo, O and Cebon, D (2013) Modeling mode i fracture of bitumen films. Journal of Materials in Civil Engineering, 25. pp. 1403-1414. ISSN 0899-1561

Miller, JI and Henderson, LM and Cebon, D (2013) Designing and testing an advanced pneumatic braking system for heavy vehicles. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227. pp. 1715-1729. ISSN 0954-4062

Midgley, WJB and Cathcart, H and Cebon, D (2013) Modelling of hydraulic regenerative braking systems for heavy vehicles. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 227. pp. 1072-1084. ISSN 0954-4070

Jujnovich, BA and Cebon, D (2013) Path-following steering control for articulated vehicles. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 135. ISSN 0022-0434

Ashby, M and Cope, E and Cebon, D (2013) Materials Selection for Engineering Design. pp. 219-244.

Miller, JI and Cebon, D (2013) An investigation of the effects of pneumatic actuator design on slip control for heavy vehicles. Vehicle System Dynamics, 51. pp. 139-164. ISSN 0042-3114

Portillo, O and Cebon, D (2012) Experimental and numerical investigation of fracture mechanics of bitumen beams. Engineering Fracture Mechanics, 97. pp. 281-296. ISSN 0013-7944

Portillo, O and Cebon, D (2012) Modeling Failure of Bitumen Films in Tension. JOURNAL OF ENGINEERING MECHANICS-ASCE, 138. pp. 1357-1371. ISSN 0733-9399

Midgley, WJB and Cebon, D (2012) Comparison of regenerative braking technologies for heavy goods vehicles in urban environments. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 226. pp. 957-970. ISSN 0954-4070

Miller, JI and Cebon, D (2012) Modelling and performance of a pneumatic brake actuator. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 226. pp. 2077-2092. ISSN 0954-4062

Cheng, C and Cebon, D (2011) Parameter and state estimation for articulated heavy vehicles. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 49. pp. 399-418. ISSN 0042-3114

Costanzi, M and Cebon, D (2011) A generalised phenomenological model for the viscoelasticity of bitumen. Acta Materialia. ISSN 1359-6454

Ren, WJ and Cebon, D and Arnold, SM (2011) Effective Materials Property Information Management for the 21st Century. J PRESS VESS-T ASME, 133. -. ISSN 0094-9930

Odhams, AMC and Roebuck, RL and Jujnovich, BA and Cebon, D (2011) Active steering of a tractor-semi-trailer. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 847-869. ISSN 0954-4070

Hunt, SW and Odhams, AMC and Roebuck, RL and Cebon, D (2011) Parameter measurement for heavy-vehicle fuel consumption modelling. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 567-589. ISSN 0954-4070

Midgley, W and Cebon, D (2011) Specifying a hydraulic regenerative braking system for an articulated urban delivery vehicle. 2011 IEEE Vehicle Power and Propulsion Conference, VPPC 2011.

Walker, D and Cebon, D (2011) The metamorphosis of long-term pavement performance traffic data. TR News. pp. 9-17. ISSN 0738-6826

Odhams, AMC and Roebuck, RL and Jujnovich, BA and Cebon, D (2011) Active steering of a tractor-semi-trailer. P I MECH ENG D-J AUT, 225. pp. 847-869. ISSN 0954-4070

Cheng, CZ and Roebuck, R and Odhams, A and Cebon, D (2011) High-speed optimal steering of a tractor-semitrailer. VEHICLE SYST DYN, 49. pp. 561-593. ISSN 0042-3114

Hunt, SW and Odhams, AMC and Roebuck, RL and Cebon, D (2011) Parameter measurement for heavy-vehicle fuel consumption modelling. P I MECH ENG D-J AUT, 225. pp. 567-589. ISSN 0954-4070

Roebuck, RL and Jones, AR and Cebon, D (2011) An investigation of air damping for heavy goods vehicles. INT J HEAVY VEH SYST, 18. pp. 115-134. ISSN 1744-232X

Stone, EJ and Cebon, D (2010) Control of semi-active anti-roll systems on heavy vehicles. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 48. pp. 1215-1243. ISSN 0042-3114

Odhams, AMC and Roebuck, RL and Lee, YJ and Hunt, SW and Cebon, D (2010) Factors influencing the energy consumption of road freight transport. Proceedings ot the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224. pp. 1995-2010. ISSN 0954-4062

Cheng, C and Odhams, AMC and Roebuck, RL and Cebon, D (2010) Feedback control of semitrailer steering at low speeds. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility. ISSN 0042-3114

Cheng, C and Roebuck, RL and Odhams, AMC and Cebon, D (2010) High-speed optimal steering of a tractor-semitrailer. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility. ISSN 0042-3114

Ossa, EA and Deshpande, VS and Cebon, D (2010) Triaxial deformation behavior of bituminous mixes. Journal of Materials in Civil Engineering (ASCE), 22. pp. 124-135. ISSN 0899-1561

Roebuck, RL and Odhams, AMC and Cebon, D (2010) An automatically-reconfigurable software-based safety system for rear-steering multi-unit vehicles. IEEE Transactions on Automatic Control. ISSN 0018-9286

Roebuck, RL and Jones, AR and Cebon, D (2010) An investigation of air damping for heavy goods vehicles. International Journal of Heavy Vehicle Systems, 17. ISSN 1744-232X

Miller, JI and Cebon, D (2010) A high performance pneumatic braking system for heavy vehicles. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 48. pp. 373-392. ISSN 0042-3114

Jeppesen, BP and Cebon, D (2009) Application of observer-bases fault detection in vehicle roll control. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 47. pp. 465-495. ISSN 0042-3114

Hunt, SW and Odhams, AMC and Roebuck, RL and Cebon, D (2009) Parameter measurement for heavy vehicle fuel consumption modelling. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ISSN 0954-4070

Helmus, MN and Gibbons, DF and Cebon, D (2008) Biocompatibility: meeting a key functional requirement of next-generation medical devices. Toxicologic Pathology, 36. pp. 70-80. ISSN 0192-6233

Odhams, AMC and Roebuck, RL and Cebon, D and Winkler, CB (2008) Dynamic safety of active trailer steering systems. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 222. pp. 367-380. ISSN 1464-4193

Roebuck, RL and Cebon, D (2008) Implementation of semi-active damping on a tri-axle heavy vehicle suspension. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222. pp. 2353-2372. ISSN 0954-4070

Stone, EJ and Cebon, D (2008) An experimental semi-active anti-roll system. Proceedings of the IMechE, Part D: Journal of Automobile Engineering, 222. pp. 2415-2433. ISSN 0954-4070

Roebuck, RL and Cebon, D (2008) Implementation of semi-active damping on a tri-axle heavy-vehicle suspension. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222. pp. 2353-2372. ISSN 0954-4070

Stone, EJ and Cebon, D (2008) An experimental semi-active anti-roll system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222. pp. 2415-2433. ISSN 0954-4070

Sirochman, R and Fairfull, A and Morgan, N and Warde, S and Cebon, D (2008) A materials database for medical devices. ADV MATER PROCESS, 166. pp. 78-79. ISSN 0882-7958

Fox, MN and Roebuck, RL and Cebon, D (2007) Modelling rolling-lobe air springs. International Journal of Heavy Vehicle Systems, 14. pp. 254-270. ISSN 1744-232X

Costanzi, M and Cebon, D (2007) An investigation of the effects of lorry suspension performance on road maintenance costs. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221. pp. 1265-1277. ISSN 0954-4062

Cebon, D and Ashby, MF (2006) Engineering materials informatics. MRS Bulletin, 31. pp. 1004-1012. ISSN 0883-7694

Rodgers, JR and Cebon, D (2006) Materials informatics. Materials Research Society Bulletin, 31. pp. 975-977. ISSN 0883-7694

Odhams, AMC and Cebon, D (2006) An analysis of ride coupling in automobile suspensions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220. pp. 1041-1061. ISSN 0954-4070

Miege, AJP and Cebon, D (2005) Active roll control of an experimental articulated vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219. pp. 791-806. ISSN 0954-4070

Harvey, JAF and Cebon, D (2005) Fracture tests on bitumen films. ASCE Journal of Materials in Civil Engineering, 17. pp. 99-106. ISSN 0899-1561

Miege, A and Cebon, D (2005) Optimal roll control of an articulated vehicle: theory and model validation. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 43. pp. 867-884. ISSN 0042-3114

Ossa, EA and Deshpande, VS and Cebon, D (2005) Phenomenological model for the monotonic and cyclic behavior of pure bitumen. ASCE Journal of Materials in Civil Engineering, 17. pp. 188-197. ISSN 0899-1561

Ossa, EA and Deshpande, VS and Cebon, D (2005) Spherical indentation behaviour of bitumen. Acta Materialia, 53. pp. 3103-3113. ISSN 1359-6454

Roebuck, RL and Cebon, D and Jeppesen, BP and Haque, J (2005) A systems approach to controlled heavy vehicle suspension. International Journal of Heavy Vehicle Systems, 12. pp. 169-192. ISSN 1744-232X

Mi├Ęge, AJP and Cebon, D (2005) Active roll control of an experimental articulated vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219. pp. 791-806. ISSN 0954-4070

Ossa, EA and Deshpande, VS and Cebon, D (2005) Phenomenological model for monotonic and cyclic behavior of pure bitumen. J MATER CIVIL ENG, 17. pp. 188-197. ISSN 0899-1561

Harvey, JAF and Cebon, D (2005) Fracture tests on bitumen films. J MATER CIVIL ENG, 17. pp. 99-106. ISSN 0899-1561

Jeppesen, BP and Cebon, D (2004) Analytical redundancy techniques for fault detection in an active heavy vehicle suspension. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 42. pp. 75-88. ISSN 0042-3114

Deshpande, VS and Cebon, D (2004) Micromechanical modeling of steady-state deformation in asphalt. ASCE Journal of Materials in Civil Engineering, 16. pp. 100-106. ISSN 0899-1561

Bergounioux, S and Ossa, EA and Deshpande, VS and Cebon, D (2004) Monotonic and cyclic behaviour of polymer-modified bitumens. Road Materials and Pavement Design, 5. pp. 25-44. ISSN 1468-0629

Ashby, MF and Brechet, YJM and Cebon, D and Salvo, L (2004) Selection strategies for materials and processes. Materials and Design, 25. pp. 51-67. ISSN 0261-3069

Deshpande, VS and Cebon, D (2004) Micromechanical modeling of steady-state deformation in asphalt. J MATER CIVIL ENG, 16. pp. 100-106. ISSN 0899-1561

Sampson, DJM and Cebon, D (2003) Achievable roll stability of heavy road vehicles. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 217. pp. 269-287. ISSN 0954-4070

Sampson, DJM and Cebon, D (2003) Active roll control of single unit heavy road vehicles. Vehicle System Dynamics, 40. pp. 229-270. ISSN 0042-3114

Cebon, D and Ashby, MF (2003) Data systems for optimal material selection. Advanced Materials and Processes, 161. pp. 51-54. ISSN 0882-7958

Fu, TT and Cebon, D (2003) Economic evaluation and the design of vehicle suspensions. International Journal of Vehicle Design, 31. pp. 125-161. ISSN 0143-3369

Harvey, JAF and Cebon, D (2003) Failure mechanisms in viscoelastic films. Journal of Materials Science, 38. pp. 1021-1032. ISSN 0022-2461

Popov, AA and Cole, DJ and Cebon, D and Winkler, CB (2003) Laboratory measurement of rolling resistance in truck tyres under dynamic loading. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 217. pp. 1071-1080. ISSN 0954-4070

Ashby, MF and Cebon, D and Marsden, W (2003) New approaches to materials education. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

Ashby, MF and Cebon, D (2003) New approaches to materials education for students of engineering. ASEE Annual Conference Proceedings. pp. 65-74. ISSN 0190-1052

Marsden, WM and Cebon, D (2003) A systematic approach to materials information management for aerospace design. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

Newland, DE and Cebon, D (2003) Closure to "could the World Trade Center have been modified to prevent its collapse?" by David E. Newland and David Cebon. J ENG MECH-ASCE, 129. pp. 1360-1361. ISSN 0733-9399

Sampson, DJM and Cebon, D (2003) Achievable roll stability of heavy road vehicles. P I MECH ENG D-J AUT, 217. pp. 269-287. ISSN 0954-4070

Popov, AA and Cole, DJ and Winkler, CB and Cebon, D (2003) Laboratory measurement of rolling resistance in truck tyres under dynamic vertical load. P I MECH ENG D-J AUT, 217. pp. 1071-1079. ISSN 0954-4070

Fu, TT and Cebon, D (2002) Analysis of a truck suspension database. Heavy Vehicle Systems, 9. pp. 281-297. ISSN 1351-7848

Newland, DE and Cebon, D (2002) Could the World Trade Center have been modified to prevent its collapse? ASCE Journal of Engineering Mechanics, 128. pp. 795-800. ISSN 0733-9399

Ashby, MF and Brechet, YJM and Cebon, D (2002) Selection strategies for materials and processes. Advanced Engineering Materials, 4. pp. 327-334. ISSN 1438-1656

Newland, DE and Cebon, D (2002) Could the World Trade Center have been modified to prevent its collapse? J ENG MECH-ASCE, 128. pp. 795-800. ISSN 0733-9399

Yap, D and Cebon, D (2000) Energy confinement in imperfect periodic systems. Journal of Sound and Vibration, 232. pp. 669-694. ISSN 0022-460X

Genin, GM and Cebon, D (2000) Failure mechanisms in asphalt concrete. International Journal of Road Materials and Pavement Design, 1. pp. 419-450. ISSN 1468-0629

Cebon, D and Ashby, MF (2000) Information systems for material and process selection. Advanced Materials & Processes, 157. pp. 44-54. ISSN 0882-7958

Cebon, D and Ashby, MF (2000) Material and process selection system. Engineering Designer, 26. pp. 8-13. ISSN 0013-7898

Kitching, KJ and Cebon, D and Cole, DJ (2000) Performance of a semi-active damper for heavy vehicles. Journal of Dynamic Systems Measurement and Control, 122. pp. 498-506. ISSN 0022-0434

Fu, TT and Cebon, D (2000) Predicting fatigue lives for bi-modal stress spectral densities. International Journal of Fatigue, 22. pp. 11-21. ISSN 0142-1123

Stergioulas, LK and Cebon, D and Macleod, MD (2000) Static weight estimation and system design for multiple-sensor weigh-in-motion. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Science, 214. pp. 1019-1036. ISSN 0954-4062

Kitching, KJ and Cole, DJ and Cebon, D (2000) Theoretical investigation into the use of controllable suspensions to minimize road damage. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 214. pp. 13-32. ISSN 0954-4070

Deshpande, VS and Cebon, D (2000) Uniaxial experiments on idealized asphalt mixes. Journal of Materials in Civil Engineering, 12. pp. 262-271. ISSN 0899-1561

Kitching, KJ and Cole, DJ and Cebon, D (2000) Performance of a semi-active damper for heavy vehicles. J DYN SYST-T ASME, 122. pp. 498-506. ISSN 0022-0434

Cebon, D (2000) Industrious punters. PROF ENG, 13. p. 15. ISSN 0953-6639

Kitching, KJ and Cole, DJ and Cebon, D (2000) Theoretical investigation into the use of controllable suspensions to minimize road damage. P I MECH ENG D-J AUT, 214. pp. 13-31. ISSN 0954-4070

Cheung, CY and Cocks, ACF and Cebon, D (1999) Isolated contact model of an idealized asphalt mix. International Journal of Mechanical Sciences, 41. pp. 767-792. ISSN 0020-7403

Deshpande, VS and Cebon, D (1999) Models for a particle reinforced non-linear viscous composite. Journal of Engineering Mechanics (ASCE), 125. pp. 255-262. ISSN 0733-9399

Deshpande, VS and Cebon, D (1999) Models of particle reinforced nonlinear-viscous composite. Journal of Engineering Mechanics (ASCE), 125. pp. 255-262. ISSN 0733-9399

Deshpande, VS and Cebon, D (1999) Steady-state constitutive relationship for idealised asphalt mixes. Mechanics of Materials, 31. pp. 271-288. ISSN 0167-6636

Kitching, KJ and Cebon, D and Cole, DJ (1999) An experimental investigation of preview control. Vehicle System Dynamics, 32. pp. 459-478. ISSN 0042-3114

Kitching, KJ and Cebon, D and Cole, DJ (1999) An experimental investigation of preview control. VEHICLE SYST DYN, 32. pp. 459-478. ISSN 0042-3114

Cole, DJ and Cebon, D (1998) Front-rear interaction of a pitch-plane truck model. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 30. pp. 117-142. ISSN 0042-3114

Cole, DJ and Cebon, D (1998) Influence of tractor-trailer interaction on assessment of road damaging performance. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 212. pp. 1-10. ISSN 0954-4070

Cole, DJ and Cebon, D (1998) Front-rear interaction of a pitch plane truck model. VEHICLE SYST DYN, 30. pp. 117-141. ISSN 0042-3114

Cole, DJ and Cebon, D (1998) Influence of tractor-trailer interaction on assessment of road damaging performance. P I MECH ENG D-J AUT, 212. pp. 1-10. ISSN 0954-4070

Potter, TEC and Cebon, D and Cole, DJ (1997) Assessing 'road-friendliness': a review. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 211. pp. 455-476. ISSN 0954-4070

Cheung, CY and Cebon, D (1997) Deformation mechanisms of pure bitumen. Journal of Materials in Civil Engineering (ASCE), 9. pp. 117-129. ISSN 0899-1561

Collop, AC and Cebon, D (1997) Effects of 'road friendly' suspensions on long-term flexible pavement performance. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Science, 211. pp. 411-424. ISSN 0954-4062

Cheung, CY and Cebon, D (1997) Experimental study of pure bitumens in tension, compression, and shear. Journal of Rheology, 41. pp. 45-74. ISSN 0148-6055

Potter, TEC and Cebon, D and Cole, DJ (1997) Indirect methods for assessing road friendliness of lorry suspensions. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 211. pp. 243-256. ISSN 0954-4070

Cheung, CY and Cebon, D (1997) Thin film deformation behavior of power-law creeping materials. Journal of Engineering Mechanics, 123. pp. 1138-1152. ISSN 0733-9399

Potter, TEC and Cebon, D and Cole, DJ (1997) Assessing 'road-friendliness': a review. P I MECH ENG D-J AUT, 211. pp. 455-475. ISSN 0954-4070

Potter, TEC and Cebon, D and Cole, DJ (1997) Indirect methods for assessing road friendliness of lorry suspensions. P I MECH ENG D-J AUT, 211. pp. 243-256. ISSN 0954-4070

Lin, RC and Cebon, D and Cole, DJ (1996) Active roll control of articulated vehicles. Vehicle System Dynamics, 26. pp. 17-43. ISSN 0042-3114

Cebon, D and Besinger, FH and Cole, DJ (1996) Control strategies for semi-active lorry suspensions. Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 210. pp. 161-178. ISSN 0954-4070

Cebon, D and Ashby, MF (1996) Database user's manuals for CMS 2.0: Polymers vI.0 (1994), Light Alloys vI.0 (1994), Metal Matrix Composites vI.0 (1994), Copper Alloys vI.0 (1994), Conductors1.0 (1995), Foams v1.0 (1996), Ferrous Metals v1.0 (1996).

Green, MF and Cebon, D (1996) Dynamic interaction between heavy vehicles and highway bridges. Computers and Structures, 62. pp. 253-264. ISSN 0045-7949

Collop, AC and Cebon, D and Cole, DJ (1996) Effects of spatial repeatability on long-term flexible pavement performance. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Science, 210. pp. 97-110. ISSN 0954-4062

Lin, RC and Cebon, D and Cole, DJ (1996) Optimal roll control of a single-unit lorry. Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 210. pp. 45-56. ISSN 0954-4070

Potter, TEC and Cebon, D and Cole, DJ and Collop, AC (1996) Road damage due to dynamic tyre forces measured on a public road. Heavy Vehicle Systems (a special series of the International Journal of Vehicle Design), 3. pp. 346-362. ISSN 1351-7848

Potter, TEC and Cebon, D and Collop, AC and Cole, DJ (1996) Road-damaging potential of measured dynamic tyre forces in mixed traffic. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 210. pp. 215-226. ISSN 0954-4070

Cole, DJ and Collop, AC and Potter, TEC and Cebon, D (1996) Spatial repeatability of measured dynamic tyre forces. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 210. pp. 185-198. ISSN 0954-4070

Collop, AC and Cebon, D (1996) Stiffness reductions of flexible pavements due to cumulative fatigue damage. Journal of Transportation Engineering, 122. pp. 131-139. ISSN 0733-947X

Cole, DJ and Cebon, D (1996) Truck suspension design to minimise road damage. Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 210. pp. 95-107. ISSN 0954-4070

Cole, DJ and Cebon, D (1996) Truck suspension design to minimize road damage. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 210. pp. 95-108. ISSN 0954-4070

Potter, TEC and Cebon, D and Cole, DJ and Collop, AC (1996) Road damage due to dynamic tyre forces measured on a public road. Heavy Vehicle Systems, 3. pp. 346-362. ISSN 1351-7848

Cebon, D and Ashby, M (1996) Picking a winner: Optimising materials selection. MATER WORLD, 4. pp. 646-648. ISSN 0967-8638

Cebon, D and Besinger, FH and Cole, DJ (1996) Control strategies for semi-active lorry suspensions. P I MECH ENG D-J AUT, 210. pp. 161-178. ISSN 0954-4070

Collop, AC and Cebon, D and Cole, DJ (1996) Effects of spatial repeatability on long-term flexible pavement performance. P I MECH ENG C-J MEC, 210. pp. 97-110. ISSN 0954-4062

Lin, RC and Cebon, D and Cole, DJ (1996) Optimal roll control of a single-unit lorry. P I MECH ENG D-J AUT, 210. pp. 45-55. ISSN 0954-4070

Potter, TEC and Cebon, D and Collop, AC and Cole, DJ (1996) Road-damaging potential of measured dynamic tyre forces in mixed traffic. P I MECH ENG D-J AUT, 210. pp. 215-225. ISSN 0954-4070

Cole, DJ and Collop, AC and Potter, TEC and Cebon, D (1996) Spatial repeatability of measured dynamic tyre forces. P I MECH ENG D-J AUT, 210. pp. 185-197. ISSN 0954-4070

Cole, DJ and Cebon, D (1996) Truck suspension design to minimize road damage. P I MECH ENG D-J AUT, 210. pp. 95-107. ISSN 0954-4070

Besinger, FH and Cebon, D and Cole, DJ (1995) Damper models for heavy vehicle ride dynamics. Vehicle System Dynamics, 24. pp. 35-64. ISSN 0042-3114

Green, MF and Cebon, D and Cole, DJ (1995) Effects of heavy vehicle suspension design on dynamics of highway bridges. Journal of Structural Engineering, 121. pp. 272-282. ISSN 0733-9445

Green, MF and Cebon, D and Cole, DJ (1995) Effects of vehicle suspension design on dynamics of highway bridges. Journal of Structural Engineering, 121. pp. 272-282. ISSN 0733-9445

Besinger, FH and Cebon, D and Cole, DJ (1995) Force control of a semi-active damper. Vehicle System Dynamics, 24. pp. 695-723. ISSN 0042-3114

Cole, DJ and Cebon, D (1995) Modification of a heavy vehicle suspension to reduce road damage. Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 209. pp. 183-194. ISSN 0954-4070

Collop, AC and Cebon, D (1995) Parametric study of factors affecting flexible-pavement performance. Journal of Transportation Engineering, 121. pp. 485-494. ISSN 0733-947X

Collop, AC and Cebon, D and Hardy, MSA (1995) Viscoelastic approach to rutting in flexible pavements. Journal of Transportation Engineering, 121. pp. 82-93. ISSN 0733-947X

Hardy, MSA and Cebon, D (1995) An investigation of anti-lock braking strategies for heavy goods vehicles. Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 209. pp. 263-271. ISSN 0954-4070

Hardy, MSA and Cebon, D (1995) An investigation of anti-lock braking strategies for heavy goods vehicles. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 209. p.263-. ISSN 0954-4070

Potter, TEC and Cebon, D and Cole, DJ and Collop, AC (1995) An investigation of road damage due to measured dynamic tyre forces. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 209. p.9-. ISSN 0954-4070

Collop, AC and Cebon, D (1995) A model of whole-life flexible pavement performance. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Science, 209. pp. 389-408. ISSN 0954-4062

Collop, AC and Cebon, D (1995) A theoretical analysis of fatigue cracking in flexible pavements. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Science, 209. p.345-. ISSN 0954-4062

GREEN, MF and CEBON, D and COLE, DJ (1995) EFFECTS OF VEHICLE SUSPENSION DESIGN ON DYNAMICS OF HIGHWAY BRIDGES. J STRUCT ENG-ASCE, 121. pp. 272-282. ISSN 0733-9445

Potter, TEC and Cebon, D and Cole, DJ (1995) Assessing the relative road damaging potential of HGVs. Proceedings of the International Symposium on Heavy Vehicle Weights and Dimensions. pp. 75-81.

Hardy, MSA and Cebon, D (1995) Investigation of anti-lock braking strategies for heavy goods vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 209. pp. 263-271. ISSN 0954-4070

BESINGER, FH and CEBON, D and COLE, DJ (1995) FORCE CONTROL OF A SEMIACTIVE DAMPER. VEHICLE SYST DYN, 24. pp. 695-723. ISSN 0042-3114

BESINGER, FH and CEBON, D and COLE, DJ (1995) DAMPER MODELS FOR HEAVY VEHICLE RIDE DYNAMICS. VEHICLE SYST DYN, 24. pp. 35-64. ISSN 0042-3114

POTTER, TEC and CEBON, D and COLE, DJ and COLLOP, AC (1995) AN INVESTIGATION OF ROAD DAMAGE DUE TO MEASURED DYNAMIC TYRE FORCES. P I MECH ENG D-J AUT, 209. pp. 9-24. ISSN 0954-4070

COLE, DJ and CEBON, D (1995) MODIFICATION OF A HEAVY VEHICLE SUSPENSION TO REDUCE ROAD DAMAGE. P I MECH ENG D-J AUT, 209. pp. 183-194. ISSN 0954-4070

Cebon, D and Ashby, MF (1994) Cambridge materials selector user's manual, version 2.0.

Hardy, MSA and Cebon, D (1994) Importance of speed and frequency in flexible pavement response. Journal of Engineering Mechanics, 120. pp. 463-482. ISSN 0733-9399

Collop, AC and Potter, TEC and Cebon, D and Cole, DJ (1994) Investigation of spatial repeatability using a tire force measuring mat. Transportation Research Record, 1448. pp. 1-7. ISSN 0361-1981

Cebon, D and Ashby, MF (1994) Materials selection for precision instruments. Measurement Science and Technology, 5. pp. 296-306. ISSN 0957-0233

Green, MF and Cebon, D (1994) Dynamic response of highway bridges to heavy vehicle loads: theory and experimental validation. Journal of Sound and Vibration, 170. pp. 51-78. ISSN 0022-460X

Cole, DJ and Cebon, D and Besinger, FH (1994) Optimisation of passive and semi-active heavy vehicle suspensions. SAE Technical Papers.

Collop, AC and Potter, TEC and Cebon, D and Cole, DJ (1994) Investigation of spatial repeatability using a tire force measuring mat. Transportation Research Record. pp. 1-7. ISSN 0361-1981

Hardy, MSA and Cebon, D (1993) Influence of heavy vehicle suspensions on ABS performance. SAE Transactions, 102. p.783-. ISSN 0096-736X

Ashby, MF and Cebon, D (1993) Materials selection in mechanical design. Journal de Physique IV, 3. C-1. ISSN 1155-4339

Hardy, MSA and Cebon, D (1993) Response of continuous pavements to moving dynamic loads. Journal of Engineering Mechanics, 119. pp. 1762-1780. ISSN 0733-9399

King, TSJ and Cebon, D (1993) An alternative to screws for plating osteoporotic bone. Journal of Biomedical Engineering, 15. pp. 79-82. ISSN 0141-5425

Cebon, D (1993) Interaction between heavy vehicles and roads. SAE Technical Papers.

Ashby, MF and Cebon, D (1993) Materials selection in mechanical design. Journal De Physique, 3. pp. 1-9. ISSN 1155-4339

Cebon, D and Ashby, MF (1992) Computer-aided materials selection for mechanical design. Metals and Materials. pp. 25-30. ISSN 0026-0940

Cole, DJ and Cebon, D (1992) Spatial repeatability of dynamic tyre forces generated by heavy vehicles. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 206. pp. 17-28. ISSN 0954-4070

Cole, DJ and Cebon, D (1992) Validation of an articulated vehicle simulation. Vehicle System Dynamics, 21. pp. 197-223. ISSN 0042-3114

Cole, DJ and Cebon, D (1992) Spatial repeatability of dynamic tyre forces generated by heavy vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 206. pp. 17-27. ISSN 0954-4070

COLE, DJ and CEBON, D (1992) VALIDATION OF AN ARTICULATED VEHICLE SIMULATION. VEHICLE SYST DYN, 21. pp. 197-223. ISSN 0042-3114

Cole, DJ and Cebon, D (1991) Assessing the road-damaging potential of heavy vehicles. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 205. pp. 223-232. ISSN 0954-4070

Cole, DJ and Cebon, D (1991) Assessing the road-damaging potential of heavy vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 205. pp. 223-232. ISSN 0954-4070

Cebon, D (1990) Design of multiple-sensor weigh-in-motion systems. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 204. pp. 133-144. ISSN 0954-4070

Cebon, D (1989) Vehicle generated road damage: a review. Vehicle System Dynamics, 18. pp. 65-76. ISSN 0042-3114

CEBON, D (1989) VEHICLE-GENERATED ROAD DAMAGE - A REVIEW. VEHICLE SYST DYN, 18. pp. 107-150. ISSN 0042-3114

Cebon, D (1988) Theoretical road damage due to dynamic tyre forces of heavy vehicles Part 1: Dynamic analysis of vehicles and road surfaces. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 202. pp. 103-108. ISSN 0954-4062

Cebon, D (1988) Theoretical road damage due to dynamic tyre forces of heavy vehicles Part 2: Simulated damage caused by a tandem-axle vehicle. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 202. pp. 109-117. ISSN 0954-4062

CEBON, D (1988) EXAMINATION OF THE ROAD DAMAGE CAUSED BY 3 ARTICULATED VEHICLES. VEHICLE SYST DYN, 17. pp. 65-76. ISSN 0042-3114

CEBON, D (1988) THEORETICAL ROAD DAMAGE DUE TO DYNAMIC TYRE FORCES OF HEAVY VEHICLES .1. DYNAMIC ANALYSIS OF VEHICLES AND ROAD SURFACES. P I MECH ENG C-J MEC, 202. pp. 103-108. ISSN 0954-4062

CEBON, D (1988) THEORETICAL ROAD DAMAGE DUE TO DYNAMIC TYRE FORCES OF HEAVY VEHICLES .2. SIMULATED DAMAGE CAUSED BY A TANDEM-AXLE VEHICLE. P I MECH ENG C-J MEC, 202. pp. 109-117. ISSN 0954-4062

Cebon, D (1986) Simulation of the response of leaf springs to broad band random excitation. Vehicle System Dynamics, 15. pp. 375-390. ISSN 0042-3114

Cebon, D (1986) HEAVY VEHICLE VIBRATION - A CASE STUDY. Dynamics of Vehicles on Roads and on Tracks, Proceedings of IAVSD Symposium (International Associa. pp. 30-43.

Cebon, D (1985) Heavy Vehicle Vibration - A Case Study. Vehicle System Dynamics, 14. pp. 27-32. ISSN 0042-3114

Cebon, D and Newland, DE (1984) ARTIFICIAL GENERATION OF ROAD SURFACE TOPOGRAPHY BY THE INVERSE FFT METHOD. Dynamics of Vehicles on Roads and on Tracks, Proceedings of IAVSD Symposium (International Associa. pp. 29-42.

Cebon, D and Newland, DE (1983) Artificial Generation cf Road Surface Topography by the Inverse F.F.T. Method. Vehicle System Dynamics, 12. pp. 160-165. ISSN 0042-3114

morrison, G and Cebon, D Data supporting the publication of 'Extremum seeking algorithms for the emergency braking of heavy goods vehicles' by Morrison and Cebon. (Unpublished)

morrison, G and Cebon, D Data supporting the publication of 'Extremum seeking algorithms for the emergency braking of heavy goods vehicles' by Morrison and Cebon. (Unpublished)

Morrison, G and Cebon, D Extremum seeking algorithms for the emergency braking of heavy goods vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. (Unpublished)

Flack, TJ and Cebon, D and Miller, J Modelling the Magnetic Performance of a Fast Pneumatic Brake Actuator. Journal of Dynamic Systems Measurement and Control: Transactions of the ASME. (Unpublished)

Miao, Q and Cebon, D Path-Tracking Errors for Active Trailer Steering Off-Highway: A Simulation Study. International Journal of Heavy Vehicle Systems. (Unpublished)

Rimmer, AJ and Cebon, D Research data supporting "Implementation of Reversing Control on a Doubly-Articulated Vehicle" ASME DS-16-1225. (Unpublished)

Morrison, G and Cebon, D Research data supporting: 'Combined emergency braking and turning of articulated heavy vehicles' by G Morrison and D Cebon. (Unpublished)

Book

Ashby, MF and Shercliff, HR and Cebon, D (2007) Materials: engineering, science, processing and design. Elsevier Butterworth-Heinemann.

Cebon, D (1999) Handbook of vehicle road interaction. Advances in Engineering, 2 . Swets and Zeitlinger, pp. 65-76.

Cebon, D (1993) Interaction between heavy vehicles and roads. Papers of the SAE, SP 951 . SAE: Society of Automotive Engineers, pp. 79-82.

Book Section

Cebon, D and Cheung, CY (2015) Deformation mechanisms of bituminous materials. In: Advances in Asphalt Materials: Road and Pavement Construction. UNSPECIFIED, pp. 169-203.

Cebon, D and Ashby, MF (2005) Materials engineering. In: Information Sources in Engineering. Guides to Information Sources . KG Saur, pp. 482-526.

Cebon, D and Ashby, MF (1992) Material selection for mechanical design. In: Computerisation and Networks of Materials Databases. ASTM Special Technical Publication, 1140 . ASTM.

Nasim, NA and Karamihas, SM and Gillespie, TD and Hansen, W and Cebon, D (1991) Behavior of a rigid pavement under moving dynamic loads. In: Pavement Analysis, Design, Rehabilitation, and Environmental Factors. Transport Research Record, 1307 . Transportation Research Board, pp. 129-135.

Cebon, D and Winkler, CB (1991) Multiple-sensor weigh-in-motion: theory and experiments. In: Pavement Management: Data Collection, Analysis, and Storage. Transport Research Record, 1311 . Transportation Research Board, pp. 70-78.

Conference or Workshop Item

Nicolaides, D and Cebon, D and Miles, J (2017) An autonomous taxi service for sustainable urban transportation. In: Smart Cities Symposium Prague 2017, 2017-5-25 to 2017-5-26, Prague, Czech Republic.

Nicolaides, D and McMahon, R and Cebon, D and Miles, J (2016) A national power infrastructure for charge-on-the-move. In: UNSPECIFIED pp. 180-185..

Nicolaides, D and McMahon, R and Cebon, D and Miles, J (2016) A national power infrastructure for charge-on-The-move. In: UNSPECIFIED pp. 180-185..

Marsden, W and Cebon, D and Arnold, S and Bednarcyk, B and Austin, N and Terentjev, I (2016) Experiences with ICME information infrastructures for applying materials models in sequence to give accurate macroscopic property prediction. In: UNSPECIFIED pp. 523-530..

Morrison, G and Cebon, D (2016) Extremum seeking control of a pneumatic braking system for heavy vehicles. In: UNSPECIFIED pp. 307-316..

Arnold, SM and Bednarcyk, BA and Austin, N and Terentjev, I and Cebon, D and Marsden, W (2016) Information management workflow and tools enabling multiscale modeling within ICME paradigm. In: UNSPECIFIED.

Morrison, G and Cebon, D (2015) Sideslip estimation for articulated heavy vehicles in low friction conditions. In: UNSPECIFIED pp. 65-70..

Saxe, CD and Cebon, D (2015) A Visual Template-Matching Method for Articulation Angle Measurement. In: UNSPECIFIED pp. 626-631..

Marsden, W and Cebon, D and Warde, S (2015) Experiences with materials information management systems for ICME: The importance of metadata. In: UNSPECIFIED.

Marsden, W and Cebon, D and Cope, E (2011) MANAGING MULTI-SCALE MATERIAL DATA FOR ACCESS WITHIN ICME ENVIRONMENTS. In: UNSPECIFIED pp. 82-90..

Ren, WJ and Cebon, D and Arnold, SM (2010) EFFECTIVE MATERIALS PROPERTY INFORMATION MANAGEMENT FOR THE 21(ST) CENTURY. In: UNSPECIFIED pp. 1551-1560..

Kienhofer, FW and Miller, JI and Cebon, D (2008) Design concept for an alternative heavy vehicle ABS system. In: UNSPECIFIED pp. 571-583..

Cheng, C and Cebon, D (2008) Improving roll stability of articulated heavy vehicles using active semi-trailer steering. In: UNSPECIFIED pp. 373-388..

Portillo, O and Cebon, D (2008) An experimental investigation of the fracture mechanics of bitumen and asphalt. In: UNSPECIFIED pp. 627-636..

Constanzi, M and Rouillard, V and Cebon, D (2006) Effects of tyre contact pressure distribution on the deformation rates of pavements. In: 9th International Symposium on Heavy Vehicle Weights and Dimensions, 2006-6-18 to 2006-6-22, University Park, in State College, Pennsylvania, USA pp. 892-903..

Kienhofer, FW and Cebon, D (2006) Improving ABS on heavy vehicles using slip control. In: 9th International Symposium on Heavy Vehicle Weights and Dimensions, 2006-6-18 to 2006-6-22, University Park, in State College, Pennsylvania, USA pp. 892-903..

Constanzi, M and Cebon, D (2006) Simulation of damage evolution in a spray sealed road. In: 9th International Symposium on Heavy Vehicle Weights and Dimensions, 2006-6-18 to 2006-6-22, University Park, in State College, Pennsylvania, USA pp. 892-903..

Roebuck, RL and Cebon, D and Dale, SG (2005) Optimal control of a semi-active tri-axle lorry suspension. In: 19th Symposium of the International Association for Vehicle System Dynamics, 2005-8-29 to 2005-9-2, Milan, Italy pp. 892-903..

Cebon, D and Ashby, MF (2005) Data systems for optimal material selection. In: International Symposium on Materials Databases (held at MITS Meeting 2005), 2005-3-15 to --, Tokyo, Japan.

Ashby, MF and Cebon, D (2005) Materials and design: creating the connections. In: A Symposium in Honour of Ken Wallace on Engineering Design: Theory and Practice, 2005-4- to --, Cambridge, UK pp. 8-21..

Ashby, MF and Cebon, D (2005) Materials selection for high temperature applications. In: Seminar on Life Predication of Structural Materials for Elevated Temperature Service (at MITS Meeting 2005), 2005-3-17 to --, Tokyo, Japan.

Jeppesen, BP and Cebon, D (2004) Analytical redundancy techniques for fault detection in an active heavy vehicle suspension. In: 6th International Symposium on Advanced Vehicle Control, AVEC2002, 2002-9- to --, Hiroshima, Japan pp. 75-88..

Jujnovich, BA and Cebon, D (2004) Validation of a semi-trailer steering model. In: 8th International Symposium on Heavy Vehicle Weights and Dimensions, 2004-3-14 to 2004-3-18, Gauteng, South Africa.

Kienhofer, FW and Cebon, D (2004) An investigation of abs strategies for articulated vehicles. In: 8th International Symposium on Heavy Vehicle Weights and Dimensions, 2004-3-14 to 2004-3-18, Gauteng, South Africa.

Ashby, MF and Cebon, D (2003) New approaches to materials education for students of engineering. In: ASEE Annual Conference & Exposition, 2003-6-22 to 2003-6-25, Nashville, Tennessee.

Marsden, W and Ashby, MF and Cebon, D (2003) New approaches to materials education. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 11th AIAA/ASME/AHS Adaptive Structures Forum, 5th AIAA Non-Deterministic Approaches Forum, 4th AIAA Gossamer Spacecraft Forum, AIAA Dynamics Specialists Conference, 2003-4-7 to 2003-4-10, Norfolk, VA, USA pp. 4174-4179..

Marsden, W and Cebon, D (2003) A systematic approach to materials information management for aerospace design. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2003-4-7 to 2003-4-10, Norfolk, VA, USA pp. 4163-4173..

Harvey, JAF and Cebon, D (2002) Fracture of bitumen films. In: 9th International Conference on Asphalt Pavement, 2002-8- to --, Copenhagen, Denamrk pp. 5-6..

Stone, E and Cebon, D (2002) A preliminary investigation of semi-active roll control. In: 6th International Symposium on Advanced Vehicle Control, AVEC2002, 2002-9-9 to 2002-9-13, Hiroshima, Japan.

Jujnovich, B and Cebon, D (2002) Comparative performance of semi-trailer steering systems. In: 7th International Symposium on Heavy Vehicle Weights and Dimensions, 2002-6-16 to 2002-6-20, Delft, The Netherlands -..

Miege, A and Cebon, D (2002) Design and implementation of an active roll control system for heavy vehicles. In: 6th International Symposium on Advanced Vehicle Control, AVEC2002, 2002-3-9 to 2002-3-13, Hiroshima, Japan.

Jeppesen, BP and Cebon, D (2001) Real-time fault identification in an active roll control system. In: The 17th International Symposium of the International Association for Vehicle System Dynamics (IAVSD): the Dynamics of Vehicles on Roads and on Tracks, 2001-8-20 to 2001-8-24, Lyngby, Denmark pp. 360-371..

Sampson, DJM and Jeppesen, BP and Cebon, D and DeRuiter, A (2000) Development of an active anti-roll control system for heavy vehicles. In: The 6th International Symposium on Heavy Vehicle Weights and Dimensions, 2000-6-18 to 2000-6-22, Saskatoon, Saskatchewan, Canada pp. 375-384..

Roebuck, RL and Kitching, KJ and Cebon, D and DeRuiter, A (2000) Developments in semi-active heavy vehicle suspensions. In: The 6th International Symposium on Heavy Vehicle Weights and Dimensions, 2000-6-18 to 2000-6-22, Saskatoon, Saskatchewan, Canada pp. 353-365..

Popov, AA and Cole, DJ and Cebon, D and Winkler, CB (2000) Energy loss in truck tyres and suspensions. In: UNSPECIFIED pp. 516-527..

Sampson, DJM and McKevitt, G and Cebon, D (2000) The development of an active roll control system for heavy vehicles. In: UNSPECIFIED pp. 704-715..

Popov, AA and Cole, DJ and Cebon, D and Winkler, CB (1999) Energy loss in truck tyres and suspensions. In: UNSPECIFIED pp. 516-527..

Sampson, DJM and McKevitt, G and Cebon, D (1999) The development of an active roll control system for heavy vehicles. In: UNSPECIFIED pp. 704-715..

Fu, TT and Cebon, D (1997) Evaluating designs through life costing. In: 11th International Conference on Engineering Design (ICED'97), 1997-8-19 to 1997-8-21, Tampere, Finland pp. 525-528..

Kitching, KJ and Cole, DJ and Cebon, D (1996) The development of a heavy vehicle semi-active damper. In: International Symposium on Advanced Vehicle Control (AVEC'96), 1996-6-24 to 1996-6-28, Aachen, Germany pp. 153-162..

Potter, TEC and Cebon, D and Cole, DJ (1996) Using parameter estimation to assess road damage. In: UNSPECIFIED pp. 559-572..

Ashby, MF and Cebon, D and Shibaike, N (1995) Micromechanisms: materials and processes. In: Proceedings of the 1st International Workshop on Collaborative Design, 1995-- to --, Tokyo, Japan.

Dorling, RJ and Smith, MC and Cebon, D (1995) Achievable dynamic response of active suspensions in bounce and roll. In: Advances in Automotive Control, 1995-3-13 to 1995-3-17, Ascona, Switzerland 63/67-70/74..

Ashby, MF and Cebon, D (1995) Materials selection for aerospace design. In: 'Aerotech 95' Aircraft Structures and Materials, -- to --, Birmingham, UK pp. 55-70..

Dorling, RJ and Smith, MC and Cebon, D (1995) Achievable dynamic response of active suspensions in bounce and roll. In: UNSPECIFIED pp. 67-74..

LIN, RC and CEBON, D and COLE, DJ (1994) AN INVESTIGATION OF ACTIVE ROLL CONTROL OF HEAVY ROAD VEHICLES. In: UNSPECIFIED pp. 308-321..

COLE, DJ and CEBON, D (1994) PREDICTING VERTICAL DYNAMIC TIRE FORCES OF HEAVY TRUCKS. In: UNSPECIFIED pp. 27-35..

Cebon, D and Ashby, MF and Chong, W-T (1993) Selecting materials in design. In: International Conference on Engineering Design (ICED'93), 1993-8-17 to 1993-8-19, The Hague, The Netherlands pp. 955-958..

Green, MF and Cebon, D (1993) Modal testing of two highway bridges. In: 11th International Modal Analysis Conference, 1993-2-1 to 1993-2-4, Kissimmee, Florida, USA pp. 838-844..

ASHBY, MF and CEBON, D (1993) MATERIALS SELECTION IN MECHANICAL DESIGN. In: UNSPECIFIED pp. 1-9..

Cebon, D and Ashby, MF (1992) Materials selection for mechanical design. In: Symposium on Computerization and Use of Materials Property Data, 1991-9- to --, Cambridge, UK.

Hardy, MSA and Cebon, D (1992) The effects of dynamic loads on the response and life of flexible pavements. In: 7th International Conference on Asphalt Pavements, 1992-- to --, Nottingham, UK.

Hardy, MSA and Cebon, D (1992) Dynamic flexible pavement response models. In: 3rd International Symposium on Heavy Vehicle Weights and Dimensions, 1992-6-28 to 1992-7-2, Cambridge, UK -..

Green, MF and Cebon, D (1992) Dynamic tests on two highway bridges. In: 3rd International Symposium on Heavy Vehicle Weights and Dimensions, 1992-6-28 to 1992-7-2, Cambridge, UK -..

Cole, DJ and Collop, AC and Potter, TEC and Cebon, D (1992) Use of a force measuring mat to compare the road damaging potential of heavy vehicles. In: 3rd International Symposium on Heavy Vehicle Weights and Dimensions, 1992-6-28 to 1992-7-2, Cambridge, UK -..

Green, MF and Cebon, D (1992) Prediction of vehicle-induced bridge vibration: applications for design. In: Annual Conference of the Canadian Society for Civil Engineering and 2nd Bi-annual Environmental Speciality Conference Engineering Materials Symposium, 1992-5-27 to 1992-5-29, Quebec City, Canada pp. 41-50..

Cole, DJ and Cebon, D (1992) Performance and application of a capacitative strip tyre force sensor. In: 6th International Conference on Road Traffic Monitoring and Control, 1992-4-28 to 1992-4-30, London, UK -..

GREEN, MF and CEBON, D (1992) DYNAMIC TESTS ON 2 HIGHWAY BRIDGES. In: UNSPECIFIED pp. 138-145..

BESINGER, FH and CEBON, D and COLE, DJ (1992) AN EXPERIMENTAL INVESTIGATION INTO THE USE OF SEMIACTIVE DAMPERS ON HEAVY LORRIES. In: UNSPECIFIED pp. 57-71..

HARDY, MSA and CEBON, D (1992) FLEXIBLE PAVEMENT RESPONSE MODELS FOR ASSESSING DYNAMIC AXLE LOADS. In: UNSPECIFIED pp. 65-72..

CEBON, D and ASHBY, MF (1992) MATERIALS SELECTION FOR MECHANICAL DESIGN. In: UNSPECIFIED pp. 323-335..

COLE, DJ and CEBON, D (1992) PERFORMANCE AND APPLICATION OF A CAPACITATIVE STRIP TYRE FORCE SENSOR. In: UNSPECIFIED pp. 123-127..

COLE, DJ and COLLOP, AC and POTTER, TEC and CEBON, D (1992) USE OF A FORCE MEASURING MAT TO COMPARE THE ROAD DAMAGING POTENTIAL OF HEAVY VEHICLES. In: UNSPECIFIED pp. 266-271..

Besinger, FH and Cole, DJ and Cebon, D (1991) Experimental investigation into the use of semi-active dampers on heavy lorries. In: 12th IAVSD Symposium on the Dynamics of Vehicles on Roads and Tracks, 1991-8-26 to 1991-8-30, Lyon, France -..

Cebon, D (1989) Vehicle loads and pavement damage: overview. In: FHWA Workshop on Load Equivalence, 1988-9- to --, Washington DC, USA -..

Hardy, MSA and Cebon, D (1989) Measurement and analysis of the dynamic response of flexible pavements. In: 2nd International Symposium on Heavy Vehicle Weights and Dimensions, 1989-6-18 to 1989-6-22, Kelowna, British Columbia, Canada -..

Cole, DJ and Cebon, D (1989) Simulation and measurement of dynamic tyre forces. In: 2nd International Symposium on Heavy Vehicle Weights and Dimensions, 1989-6-18 to 1989-6-22, Kelowna, British Columbia, Canada -..

Cole, DJ and Cebon, D (1989) A capacitative strip sensor for measuring dynamic tyre forces. In: 2nd International Conference on Road Traffic Monitoring, 1989-2-7 to 1989-2-9, London, UK -..

COLE, DJ and CEBON, D (1989) A CAPACITATIVE STRIP SENSOR FOR MEASURING DYNAMIC TYRE FORCES. In: UNSPECIFIED pp. 38-42..

Cebon, D (1987) Assessment of the dynamic wheel forces generated by heavy road vehicles. In: ARRB/FORS Symposium on Heavy Vehicle Suspension Characteristics, 1987-- to --, Canberra, Australia.

Cebon, D (1987) Examination of the road damage caused by three articulated vehicles. In: 10th IAVSD Symposium on the Dynamics of Vehicles on Roads and Tracks, 1987-8-24 to 1987-8-28, Prague, Czechoslovakia pp. 244-246..

Cebon, D (1986) Road damaging effects of dynamic axle loads. In: 9th International Symposium on Heavy Vehicles Weights and Dimensions, 1986-6-8 to 1986-6-13, Kelowna, British Columbia, Canada.

Cebon, D (1985) Heavy vehicle vibration - a case study. In: 9th IAVSD Symposium on the Dynamics of Vehicles on Roads and on Tracks, 1985-6-24 to 1985-6-28, Linkoping, Sweden -..

Cebon, D and Newland, DE (1983) The artificial generation of road surface topography by the inverse FFT method. In: 8th IAVSD Symposium on the Dynamics of Vehicles on Roads and on Railway Tracks, 1983-8-15 to 1983-8-19, Cambridge, MA, USA 354-..

Monograph

Midgley, WJB and Cebon, D (2010) Comparison of regenerative braking technologies for heavy vehicles. Technical Report. Cambridge University Engineering Department.

Goodrum, WJ and Cebon, D (2010) Synthesising spatially repeatable tyre forces from axle load probability distributions. Technical Report. Cambridge University Engineering Department.

Hall, B and Odhams, AMC and Cebon, D (2007) Social appraisal: active multi-axle steering of heavy goods vehicles. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Aggarwal, A and Roebuck, RL and Cebon, D (2005) Preliminary report on modelling air springs. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ossa, EA and Deshpande, VS and Cebon, D (2004) Triaxial deformation behaviour of bituminous mixes. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ossa, EA and Deshpande, VS and Cebon, D (2004) Uniaxial monotonic and cyclic deformation behaviour of bituminous mixes. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kienhofer, FW and Cebon, D (2003) Brake testing an articulated vehicle. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Jujnovich, B and Cebon, D (2003) Testing of the Don-Bur SCM steering trailer. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Roebuck, RL and Cebon, D (2002) An investigation of semi-active damping on a heavy vehicle. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Stergioulas, LK and Cebon, D (1999) An experimental trial of multiple-sensor weigh-in-motion. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Genin, GM and Cebon, D (1998) Failure mechanisms in asphalt concrete. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fu, TT and Cebon, D (1998) A survey of trailer suspension operators. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fu, T-T and Cebon, D (1998) A survey of trailer suspension operators. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Cebon, D and Ashby, MF (1997) The optimal selection of engineering entities. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

D, C and M F, A (1997) The optimal selection of engineering entities. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Deshpande, VS and Cebon, D (1996) Plane strain deformation of a regular array of hexagonal particles with a bitumen binder. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

McKelvey, AL and Cebon, D and Collop, AC and Ashby, MF (1996) An investigation of fracture of bituminous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cole, DJ and Cebon, D (1995) A preliminary investigation of tractor/trailer interaction in articulated vehicles. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Potter, TEC and Collop, AC and Cole, DJ and Cebon, D (1994) A34 MAT tests: results and analysis. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Dorling, RJ and Cebon, D and Cole, DJ (1994) Analysis of the P.A.W.S. lorry suspension. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cole, DJ and Cebon, D (1994) Truck suspension design to minimise road damage. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cole, DJ and Cebon, D (1994) Truck suspension design to minimise road damage. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Cole, DJ and Cebon, D (1993) Heavy vehicle suspension modifications to reduce road damage. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lin, RC and Cebon, D and Cole, DJ (1993) Validation of an articlated vehicle yaw/roll model. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Collop, AC and Cebon, D (1993) A theoretical analysis of fatigue cracking of flexible pavements. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Collop, AC and Cebon, D and Hardy, MSA (1992) A visco-plastic approach to rutting in flexible pavements. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cebon, D and Ashby, MF (1991) Computer-based materials selection for mechanical design. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Patent

UNSPECIFIED Building collapse control system and method. doi:.

UNSPECIFIED Capacitative weight sensor. doi:.

Thesis

Cebon, D (1985) An investigation of the dynamic interaction between wheeled vehicles and road surfaces. PhD thesis, UNSPECIFIED.

This list was generated on Sun Sep 24 01:04:15 2017 BST.