Department of Engineering / Research / Academic Divisions / Energy, Fluid Mechanics and Turbomachinery / Turbomachinery / Publications

Department of Engineering

Turbomachinery - Research Group Publications

Jump to: 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1990 | 1989 | 1988 | 1987 | 1986 | 1985 | 1984 | 1983 | 1977 | NULL
Number of items: 321.

2014

Cao, T and Xu, L and Yang, M and Martinez-Botas, RF (2014) Radial Turbine Rotor Response to Pulsating Inlet Flows. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 136. ISSN 0889-504X

Giacche, D and Xu, L and Coupland, J (2014) Optimization of Bypass Outlet Guide Vane for Low Interaction Noise. In: UNSPECIFIED pp. 1145-1169..

Graham, WR and Hall, CA and Vera Morales, M (2014) The potential of future aircraft technology for noise and pollutant emissions reduction. Transport Policy. ISSN 0967-070X

Maffioli, A and Davidson, PA and Dalziel, SB and Swaminathan, N (2014) The evolution of a stratified turbulent cloud. Journal of Fluid Mechanics, 739. pp. 229-253. ISSN 0022-1120

2013

Cranstone, AW and Pullan, G and Curtis, EM and Bather, S (2013) Aerodynamic design of high end wall angle turbine stages- part II: Experimental verification. Journal of Turbomachinery, 136. ISSN 0889-504X

Cranstone, AW and Pullan, G and Curtis, EM and Bather, S (2013) Aerodynamic design of high end wall angle turbine stages-part I: Methodology development. Journal of Turbomachinery, 136. ISSN 0889-504X

Dixon, JA and Valencia, AG and Bauknecht, A and Coren, D and Atkins, N (2013) Heat Transfer in Turbine Hub Cavities Adjacent to the Main Gas Path. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135. ISSN 0889-504X

Gunn, EJ and Tooze, SE and Hall, CA and Colin, Y (2013) An Experimental Study of Loss Sources in a Fan Operating With Continuous Inlet Stagnation Pressure Distortion. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135. ISSN 0889-504X

Jefferson-Loveday, RJ and Nagabhushana Rao, V and Tyacke, JC and Tucker, PG (2013) High-order detached eddy simulation, zonal LES and URANS of cavity and labyrinth seal flows. International Journal for Numerical Methods in Fluids, 73. pp. 830-846. ISSN 0271-2091

Lim, CH and Pullan, G and Ireland, P (2013) Influence of Film Cooling Hole Angles and Geometries on Aerodynamic Loss and Net Heat Flux Reduction. Journal of Turbomachinery, 135. 051019-051019. ISSN 0889-504X

Nagabhushana Rao, V and Tucker, PG and Jefferson-Loveday, RJ and Coull, JD (2013) Large eddy simulations in low-pressure turbines: Effect of wakes at elevated free-stream turbulence. International Journal of Heat and Fluid Flow. ISSN 0142-727X

Semiletov, VA and Karabasov, SA (2013) Airfoil flow and noise computation using monotonically integrated large eddy simulation and acoustic analogy: Effect of the grid resolution. J Acoust Soc Am, 133. 3420-.

Tyacke, J and Tucker, P and Jefferson-Loveday, R and Rao Vadlamani, N and Watson, R and Naqavi, I and Yang, X (2013) Large Eddy Simulation for Turbines: Methodologies, Cost and Future Outlooks. Journal of Turbomachinery, 136. 061009-061009. ISSN 0889-504X

Yoon, S and Curtis, E and Denton, J and Longley, J (2013) The effect of clearance on shrouded and unshrouded turbines at two levels of reaction. Journal of Turbomachinery, 136. ISSN 0889-504X

Yoon, S and Denton, J and Curtis, E and Longley, J and Pullan, G (2013) Improving intermediate pressure turbine performance by using a nonorthogonal stator. Journal of Turbomachinery, 136. ISSN 0889-504X

Zachariadis, A and Hall, C and Parry, AB (2013) Contrarotating Open Rotor Operation for Improved Aerodynamics and Noise at Takeoff. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135. ISSN 0889-504X

2012

Coull, JD and Hodson, HP (2012) Blade Loading and Its Application in the Mean-Line Design of Low Pressure Turbines. Journal of Turbomachinery, 135. ISSN 0889-504X

Coull, JD and Hodson, HP (2012) Predicting the Profile Loss of High-Lift Low Pressure Turbines. J TURBOMACH, 134. -. ISSN 0889-504X

Cranstone, AW and Pullan, G and Curtis, EM and Bather, S (2012) Aerodynamic Design of High Endwall Angle Turbine Stages – Part 1: Methodology Development. In: ASME Turbo Expo 2012, 2012-6-11 to 2012-6-15, Copenhagen.

Cranstone, AW and Pullan, G and Curtis, EM and Bather, S (2012) Aerodynamic Design of High Endwall Angle Turbine Stages – Part 2: Experimental Verification. In: ASME Turbo Expo 2012, 2012-6-11 to 2012-6-15, Copenhagen.

Defoe, JJ and Spakovszky, ZS (2012) Shock Propagation and MPT Noise From a Transonic Rotor in Nonuniform Flow. Journal of Turbomachinery, 135. ISSN 0889-504X

Denton, JD and Pullan, G (2012) Numerical Investigation into the Sources of Endwall Loss in Axial Flow Turbines. In: ASME Turbo Expo 2012, 2012-6-11 to 2012-6-15, Copenhagen.

Eastwood, D and Coren, DD and Long, CA and Atkins, NR and Childs, PRN and Scanlon, TJ and Guijarro-Valencia, A (2012) Experimental Investigation of Turbine Stator Well Rim Seal, Re-Ingestion and Interstage Seal Flows Using Gas Concentration Techniques and Displacement Measurements. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 134. ISSN 0742-4795

Evans, S and Coull, J and Haneef, I and Hodson, H (2012) Minimizing the Loss Produced by a Turbulent Separation Using Vortex Generator Jets. In: UNSPECIFIED pp. 778-787..

Fidalgo, VJ and Hall, CA and Colin, Y (2012) A Study of Fan-Distortion Interaction Within the NASA Rotor 67 Transonic Stage. Journal of Turbomachinery, 134. ISSN 0889-504X

Goodhand, MN and Miller, RJ (2012) The Impact of Real Geometries on Three-Dimensional Separations in Compressors. J TURBOMACH, 134. -. ISSN 0889-504X

Hodson, HP and Hynes, TP and Greitzer, EM and Tan, CS (2012) A Physical Interpretation of Stagnation Pressure and Enthalpy Changes in Unsteady Flow. Journal of Turbomachinery, 134. ISSN 0889-504X

Houghton, T and Day, I (2012) Stability enhancement by casing grooves: The importance of stall inception mechanism and solidity. Journal of Turbomachinery, 134. ISSN 0889-504X

Klus, P and Lam, S and Lyberg, D and Cheung, MS and Pullan, G and McFarlane, I and Yeo, GSH and Lam, BY (2012) BarraCUDA - a fast short read sequence aligner using graphics processing units. BMC Res Notes, 5. 27-.

Lim, CH and Pullan, G and Northall, J (2012) Estimating the Loss Associated With Film Cooling for a Turbine Stage. J TURBOMACH, 134. -. ISSN 0889-504X

Markesteijn, AP and Hartkamp, R and Luding, S and Westerweel, J (2012) A comparison of the value of viscosity for several water models using Poiseuille flow in a nano-channel. J Chem Phys, 136. 134104-.

Pullan, G and Young, AM and Day, IJ and Greitzer, EM and Spakovszky, ZS (2012) Origins and Structure of Spike-Type Rotating Stall. In: ASME Turbo Expo 2012, 2012-6-11 to 2012-6-15, Copenhagen.

Wakelam, CT and Hynes, TP and Hodson, HP and Evans, SW and Chanez, P (2012) Separation Control for Aeroengine Intakes, Part 1: Low-Speed Investigation of Control Strategies. JOURNAL OF PROPULSION AND POWER, 28. pp. 758-765. ISSN 0748-4658

Wakelam, CT and Hynes, TP and Hodson, HP and Evans, SW and Chanez, P (2012) Separation Control for Aeroengine Intakes, Part 2: High-Speed Investigations. JOURNAL OF PROPULSION AND POWER, 28. pp. 766-772. ISSN 0748-4658

Young, A and Day, I and Pullan, G (2012) Stall Warning by Blade Pressure Signature Analysis. Journal of Turbomachinery, 135. ISSN 0889-504X

Zamboni, G and Xu, L (2012) Fan Root Aerodynamics for Large Bypass Gas Turbine Engines: Influence on the Engine Performance and 3D Design. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 134. ISSN 0889-504X

2011

Brandvik, T and Pullan, G (2011) An Accelerated 3D Navier-Stokes Solver for Flows in Turbomachines. J TURBOMACH, 133. -. ISSN 0889-504X

Coull, JD and Hodson, HP (2011) Unsteady boundary-layer transition in low-pressure turbines. J FLUID MECH, 681. pp. 370-410. ISSN 0022-1120

Giacche, D and Xu, LP and Coupland, J and Wilson, AG (2011) Comparison Between Postprocessing Methods Applied to Rotor-Stator-Interaction Tone-Noise Problems. AIAA J, 49. pp. 1214-1229. ISSN 0001-1452

Goodhand, MN and Miller, RJ (2011) Compressor Leading Edge Spikes: A New Performance Criterion. J TURBOMACH, 133. -. ISSN 0889-504X

Houghton, T and Day, I (2011) Enhancing the stability of subsonic compressors using casing grooves. Journal of Turbomachinery, 133. ISSN 0889-504X

Jefferson Loveday, RJ and Tucker, PG (2011) Wall resolved LES and zonal LES of round jet impingement heat transfer on a flat plate. Numerical Heat Transfer, Part B: Fundamentals, 59. pp. 190-208. ISSN 1040-7790

Massini, M and Miller, RJ and Hodson, HP (2011) A New Intermittent Aspirated Probe for the Measurement of Stagnation Quantities in High Temperature Gases. J TURBOMACH, 133. -. ISSN 0889-504X

Montomoli, F and Hodson, HP and Lapworth, L (2011) RANS-URANS in axial compressor, a design methodology. P I MECH ENG A-J POW, 225. pp. 363-374. ISSN 0957-6509

Randle, WE and Hall, CA and Vera-Morales, M (2011) Improved Range Equation Based on Aircraft Flight Data. JOURNAL OF AIRCRAFT, 48. pp. 1291-1298. ISSN 0021-8669

Saeed, TI and Graham, WR and Halls, CA (2011) Boundary-Layer Suction System Design for Laminar-Flying-Wing Aircraft. In: UNSPECIFIED pp. 1368-1379..

Torre, D and Vazquez, R and Blanco, ED and Hodson, HP (2011) A New Alternative for Reduction in Secondary Flows in Low Pressure Turbines. J TURBOMACH, 133. -. ISSN 0889-504X

Tucker, PG and Eastwood, S and Klostermeier, C and Xia, H and Ray, P and Tyacke, JC and Dawes, WN (2011) Hybrid LES approach for practical turbomachinery flows: Part 2 - further applications. Transactions of the ASME Journal of Turbomachinery. ISSN 0889-504X

Wheeler, APS and Atkins, NR and He, L (2011) Turbine Blade Tip Heat Transfer in Low Speed and High Speed Flows. J TURBOMACH, 133. -. ISSN 0889-504X

Zachariadis, A and Hall, CA (2011) Application of a Navier-Stokes Solver to the Study of Open Rotor Aerodynamics. J TURBOMACH, 133. -. ISSN 0889-504X

2010

Coull, JD and Hodson, HP (2010) PREDICTING THE PROFILE LOSS OF HIGH-LIFT LOW PRESSURE TURBINES. In: UNSPECIFIED pp. 1283-1297..

Coull, JD and Thomas, RL and Hodson, HP (2010) Velocity Distributions for Low Pressure Turbines. J TURBOMACH, 132. -. ISSN 0889-504X

Dawes, WN and Kellar, WP and Harvey, SA (2010) TOWARDS COOLED TURBINE PRELIMINARY LIFE PREDICTION via CONCURRENT AERODYNAMIC, THERMAL & MATERIAL STRESS SIMULATIONS on CONJUGATE MESHES. In: UNSPECIFIED pp. 711-722..

Fidalgo, VJ and Hall, CA and Colin, Y (2010) A STUDY OF FAN-DISTORTION INTERACTION WITHIN THE NASA ROTOR 67 TRANSONIC STAGE. In: UNSPECIFIED pp. 369-380..

Giacche, D and Ishikawa, T and Yamaguchi, T (2010) Hydrodynamic entrapment of bacteria swimming near a solid surface. PHYS REV E, 82. -. ISSN 1539-3755

Giacché, D and Ishikawa, T (2010) Hydrodynamic interaction of two unsteady model microorganisms. J Theor Biol, 267. pp. 252-263.

Goodhand, MN and Miller, RJ (2010) THE IMPACT OF REAL GEOMETRIES ON THREE-DIMENSIONAL SEPARATIONS IN COMPRESSORS. In: UNSPECIFIED pp. 129-138..

Jefferson Loveday, RJ and Tucker, PG (2010) LES of impingement heat transfer on a concave surface. Numerical Heat Transfer Part A: Applications, 58. pp. 247-271. ISSN 1040-7782

Jellema, LJ and Markesteijn, AP and Westerweel, J and Verpoorte, E (2010) Tunable hydrodynamic chromatography of microparticles localized in short microchannels. Anal Chem, 82. pp. 4027-4035.

Karabasov, SA (2010) Understanding jet noise. Philos Trans A Math Phys Eng Sci, 368. pp. 3593-3608. ISSN 1364-503X

Karabasov, SA and Afsar, MZ and Hynes, TP and Dowling, AP and McMullan, WA and Pokora, CD and Page, GJ and McGuirk, JJ (2010) Jet Noise: Acoustic Analogy Informed by Large Eddy Simulation. AIAA JOURNAL, 48. pp. 1312-1325. ISSN 0001-1452

Karakasis, MK and Naylor, EMJ and Miller, RJ and Hodson, HP (2010) THE EFFECT OF AN UPSTREAM COMPRESSOR ON A NON-AXISYMMETRIC S-DUCT. In: UNSPECIFIED pp. 477-486..

Krishnababu, SK and Hodson, HP and Booth, GD and Lock, GD and Dawes, WN (2010) Aerothermal Investigation of Tip Leakage Flow in a Film Cooled Industrial Turbine Rotor. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 132. -. ISSN 0889-504X

Lim, CH and Pullan, G and Northall, J (2010) ESTIMATING THE LOSS ASSOCIATED WITH FILM COOLING FOR A TURBINE STAGE. In: UNSPECIFIED pp. 1401-1413..

Massini, M and Miller, RJ and Hodson, HP and Collings, N (2010) A NOVEL TECHNIQUE FOR MEASURING STAGNATION QUANTITIES AND GAS COMPOSITION IN HIGH TEMPERATURE FLOWS. In: UNSPECIFIED pp. 223-233..

Naylor, EMJ and Duenas, CO and Miller, RJ and Hodson, HP (2010) Optimization of Nonaxisymmetric Endwalls in Compressor S-Shaped Ducts. In: UNSPECIFIED -..

Ong, J and Miller, RJ and Denton, JD (2010) The prediction of hot streak migration in a high-pressure turbine. P I MECH ENG A-J POW, 224. pp. 119-128. ISSN 0957-6509

Popovic, I and Hodson, HP (2010) AEROTHERMAL IMPACT OF THE INTERACTION BETWEEN HUB LEAKAGE AND MAINSTREAM FLOWS IN HIGHLY-LOADED HP TURBINE BLADES. In: UNSPECIFIED pp. 965-976..

Sargeant, MA and Hynes, TP and Graham, WR and Hileman, JI and Drela, M and Spakovszky, ZS (2010) Stability of Hybrid-Wing-Body-Type Aircraft with Centerbody Leading-Edge Carving. J AIRCRAFT, 47. pp. 970-974. ISSN 0021-8669

Schabowski, Z and Hodson, H and Giacche, D and Power, B and Stokes, MR (2010) AEROMECHANICAL OPTIMISATION OF A WINGLET-SQUEALER TIP FOR AN AXIAL TURBINE. In: UNSPECIFIED pp. 1593-1607..

Tan, CS and Day, I and Morris, S and Wadia, A (2010) Spike-Type Compressor Stall Inception, Detection, and Control. ANNU REV FLUID MECH, 42. pp. 275-300. ISSN 0066-4189

Tucker, PG and Eastwood, S and Klostermeier, C and Xia, H and Ray, P and Tyacke, JC and Dawes, WN (2010) Hybrid LES approach for practical turbomachinery flows: Part 2 - further applications. pp. 1055-1067.

Vera-Morales, M and Hall, CA (2010) Modeling Performance and Emissions from Aircraft for the Aviation Integrated Modelling Project. In: UNSPECIFIED pp. 812-819..

Xia, H and Tucker, PG and Dawes, WN (2010) Level sets for CFD in aerospace engineering. Progess in Aerospace Sciences, 46. pp. 274-283. ISSN 0376-0421

Xu, JY and Lu, TJ and Hodson, HP and Fleck, NA (2010) Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow. INT J HEAT FLUID FL, 31. pp. 57-69. ISSN 0142-727X

Yoon, S and Curtis, E and Denton, J and Longley, J (2010) The effect of clearance on shrouded and unshrouded turbines at two levels of reaction. Proceedings of the ASME Turbo Expo, 7. pp. 1231-1241.

2009

Brandvik, T and Pullan, G (2009) An accelerated 3D Navier-Stokes solver for flows in turbomachines. In: ASME IGTI Turbo Expo, 2009-6- to --, Orlando, Florida, USA.

Curtis, EM and Denton, JD and Longley, JP and Rosic, B (2009) CONTROLLING TIP LEAKAGE FLOW OVER A SHROUDED TURBINE ROTOR USING AN AIR-CURTAIN. In: UNSPECIFIED pp. 885-894..

Dawes, WN and Kellar, WP and Richardson, GA (2009) APPLICATION OF TOPOLOGY-FREE OPTIMIZATION TO MANAGE COOLED TURBINE TIP HEAT LOAD. In: UNSPECIFIED pp. 533-543..

Dickens, T and Day, I (2009) THE DESIGN OF HIGHLY LOADED AXIAL COMPRESSORS. In: UNSPECIFIED pp. 57-67..

Goloviznin, VM and Karabasov, SA and Kozubskaya, TK and Maksimov, NV (2009) CABARET scheme for the numerical solution of aeroacoustics problems: Generalization to linearized one-dimensional Euler equations. COMP MATH MATH PHYS+, 49. pp. 2168-2182. ISSN 0965-5425

Goodhand, MN and Miller, RJ (2009) COMPRESSOR LEADING EDGE SPIKES: A NEW PERFORMANCE CRITERION. In: UNSPECIFIED pp. 1553-1562..

Hall, CA (2009) Low noise engine design for the silent aircraft initiative. The Aeronautical Journal, 113. pp. 599-607. ISSN 0001-9240

Hall, CA and Schwartz, E and Hileman, JI (2009) Assessment of technologies for the silent aircraft initiative. Journal of Propulsion and Power, 25. pp. 1153-1162. ISSN 0748-4658

Hodson, HP and Hynes, TP and Greitzer, EM and Tan, CS (2009) A PHYSICAL INTERPRETATION OF STAGNATION PRESSURE AND ENTHALPY CHANGES IN UNSTEADY FLOW. In: UNSPECIFIED pp. 773-784..

Karabasov, SA and Berloff, PS and Goloviznin, VM (2009) CABARET in the ocean gyres. OCEAN MODEL, 30. pp. 155-168. ISSN 1463-5003

Karabasov, SA and Goloviznin, VM (2009) Compact Accurately Boundary-Adjusting high-REsolution Technique for fluid dynamics. J COMPUT PHYS, 228. pp. 7426-7451. ISSN 0021-9991

Krishnababu, SK and Dawes, WN and Hodson, HP and Lock, GD and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part II - effect of relative casing motion. Transactions of the ASME Journal of Turbomachinery, 131. 011007-. ISSN 0889-504X

Krishnababu, SK and Hodson, HP and Dawes, WN and Newton, PJ and Lock, GD (2009) Numerical and experimental investigation of tip leakage flow and heat transfer using idealised rotor-tip models at transonic conditions. Aeronautical Journal, 113. pp. 165-176. ISSN 0001-9240

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, GD and Hodson, HP and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part I - effect of tip geometry and tip clearance gap. Transactions of the ASME Journal of Turbomachinery, 131. 011006-. ISSN 0889-504X

Markesteijn, AP and Usta, OB and Ali, I and Balazs, AC and Yeomans, JM (2009) Flow injection of polymers into nanopores. SOFT MATTER, 5. pp. 4575-4579. ISSN 1744-683X

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part III - tip cooling. Transactions of the ASME Journal of Turbomachinery, 131. 011008-. ISSN 0889-504X

Tucker, PG and Karabasov, SA (2009) Unstructured grid solution of the eikonal equation for acoustics. International Journal of Aeroacoustics, 8. pp. 535-553. ISSN 1475-472X

Wheeler, APS and Sofia, A and Miller, RJ (2009) The Effect of Leading-Edge Geometry on Wake Interactions in Compressors. J TURBOMACH, 131. -. ISSN 0889-504X

Yoon, S and Denton, J and Curtis, E and Longley, J and Pullan, G (2009) IMPROVING INTERMEDIATE PRESSURE TURBINE PERFORMANCE BY USING A NON-ORTHOGONAL STATOR. In: UNSPECIFIED pp. 895-904..

Zachariadis, A and Hall, CA (2009) APPLICATION OF A NAVIER-STOKES SOLVER TO THE STUDY OF OPEN ROTOR AERODYNAMICS. In: UNSPECIFIED pp. 69-80..

de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2009) Effect of the leakage flows and the upstream platform geometry on the endwall flows of a turbine cascade. Transactions of the ASME Journal of Turbomachinery, 131. 011004-. ISSN 0889-504X

2008

Bell, CP and Clarkson, PJ and Dawes, WN (2008) Improving the turbine cooling conceptual design process. In: ASME Turbo Expo 2008, 2008-5-9 to 2008-5-13, Berlin, Germany pp. 2631-2640..

Coull, JD and Thomas, RL and Hodson, HP (2008) VELOCITY DISTRIBUTIONS FOR LOW PRESSURE TURBINES. In: UNSPECIFIED pp. 1191-1206..

Dawes, WN (2008) Rapid prototyping design optimization using flow sculpting. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 130. -. ISSN 0889-504X

Day, I and Williams, J and Freeman, C (2008) Rain igestion in axial flow compressors at part speed. Journal of Turbomachinery, 130. ISSN 0889-504X

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2008) Control of three-dimensional separations in axial compressors by tailored boundary layer suction. Transactions of the ASME, Journal of Turbomachinery, 130. ISSN 0889-504X

Hsu, PL and Cheng, SJ and Saumarez, RC and Dawes, WN and McMahon, RA (2008) An extended computational model of the circulatory system for designing ventricular assist devices. ASAIO J, 54. pp. 594-599.

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM and Clarkson, PJ (2008) Biobjective design optimization for axial compressors using tabu search. AIAA Journal, 46. pp. 701-711. ISSN 0001-1452

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM and Clarkson, PJ (2008) Insight into high-quality aerodynamic design spaces through multi-objective optimization. Computer Modeling in Engineering and Science, 37. pp. 1-44. ISSN 1526-1492

Krishnababu, SK and Hodson, HP and Booth, GD and Lock, GD and Dawes, WN (2008) Aero-thermal investigation of tip leakage flow in a film cooled industrial turbine rotor. Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, 4. pp. 177-186.

Massini, M and Miller, RJ and Hodson, HP (2008) A NEW INTERMITTENT ASPIRATED PROBE FOR THE MEASUREMENT OF STAGNATION QUANTITIES IN HIGH TEMPERATURE GASES. In: UNSPECIFIED pp. 145-152..

Naylor, EMJ and Duenas, CO and Miller, RJ and Hodson, HP (2008) OPTIMISATION OF NON-AXISYMMETRIC ENDWALLS IN COMPRESSOR S-SHAPED DUCTS. In: UNSPECIFIED pp. 305-316..

Nieborg, VHJ and Markesteijn, AP and Lindken, RH and Witkamp, GJ and Kramer, HJM and Westerweell, J (2008) Mixing with EOF for a precipitation reaction. J DISPER SCI TECHNOL, 29. pp. 587-592. ISSN 0193-2691

Ong, J and Miller, RJ (2008) HOT STREAK AND VANE COOLANT MIGRATION IN A DOWNSTREAM ROTOR. In: UNSPECIFIED pp. 1749-1760..

Opoka, MM and Hodson, HP (2008) Experimental investigation of unsteady transition processes on high-lift T106A turbine blades. In: UNSPECIFIED pp. 424-432..

Opoka, MM and Hodson, HP (2008) Transition on the T106 LP turbine blade in the presence of moving upstream wakes and downstream potential fields. In: UNSPECIFIED -..

Opoka, MM and Thomas, RL and Hodson, HP (2008) Boundary layer transition on the high lift T106A low-pressure turbine blade with an oscillating downstream pressure field. In: UNSPECIFIED -..

Parikesit, GO and Markesteijn, AP and Piciu, OM and Bossche, A and Westerweel, J and Young, IT and Garini, Y (2008) Size-dependent trajectories of DNA macromolecules due to insulative dielectrophoresis in submicrometer-deep fluidic channels. Biomicrofluidics, 2. 24103-.

Pullan, G and Harvey, NW (2008) The influence of sweep on axial flow turbine aerodynamics in the endwall region. In: UNSPECIFIED -..

Timmerman, BH and Skeen, AJ and Bryanston Cross, PJ and Tucker, PG and Jefferson Loveday, RJ and Paduano, J and Guenette Jr, GR (2008) High-speed digital visualization and high-frequency automated shock tracking in supersonic flows. Optical Engineering, 47. ISSN 0091-3286

2007

Brandvik, T and Pullan, G (2007) Acceleration of a two-dimensional Euler flow solver using commodity graphics hardware. Proceedings of the Institution of Mechanical Engineers, Pt C: Journal of Mechanical Engineering Science, 221. pp. 1745-1748. ISSN 0954-4062

Crichton, D and Xu, L and Hall, CA (2007) Preliminary fan design for a silent aircraft. Transactions of the ASME Journal of Turbomachinery, 129. pp. 184-191. ISSN 0889-504X

Dawes, WN (2007) Turbomachinery computational fluid dynamics: asymptotes and paradigm shifts. Philos Trans A Math Phys Eng Sci, 365. pp. 2553-2585. ISSN 1364-503X

Duenas, CO and Miller, RJ and Hodson, HP and Longley, JP (2007) Effect of length on compressor inter-stage duct performance. In: UNSPECIFIED pp. 319-329..

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2007) Interaction of tip clearance flow and three-dimensional separations in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 679-685. ISSN 0889-504X

Goloviznin, VM and Semenov, VN and Korortkin, IA and Karabasov, SA (2007) A novel computational method for modelling stochastic advection in heterogeneous media. Transport in Porous Media, 66. pp. 439-456. ISSN 0169-3913

Hall, CA and Crichton, D (2007) Engine design studies for a silent aircraft. Transactions of the ASME Journal of Turbomachinery, 129. pp. 479-487. ISSN 0889-504X

Haneef, I and Ali, SZ and Udrea, F and Coull, JD and Hodson, HP (2007) High performance SOI-CMOS wall shear stress sensors. In: IEEE Sensors, 2007-10-28 to 2007-10-31, Atlanta, GA, USA pp. 1060-1064..

Hutabarat, W and Parks, GT and Jarrett, JP and Dawes, WN and Clarkson, PJ (2007) Aerodynamic topology optimisation using an implicit representation and a multiobjective genetic algorithm. In: 8th International Conference on Evolution Artificielle, 2007-10-29 to 2007-10-31, Tours, France pp. 148-159..

Jarrett, JP and Dawes, WN and Clarkson, PJ (2007) An approach to integrated multi-disciplinary turbomachinery design. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 488-494. ISSN 0889-504X

Karabasov, SA and Goloviznin, VA (2007) New efficient high-resolution method for nonlinear problems in aeroacoustics. In: UNSPECIFIED pp. 2861-2871..

Karabasov, SA and Goloviznin, VM (2007) A new efficient high-resolution method for non-linear problems in fluid mechanics. In: UNSPECIFIED pp. 269-272..

Kipouros, T and Molinari, M and Dawes, WN and Parks, GT and Savill, AM and Jenkins, KW (2007) An investigation of the potential for enhancing the computational turbomachinery design cycle using surrogate models and high performance parallelisation. In: ASME Turbo Expo 2007, 2007-5-14 to 2007-5-17, Montreal, Canada pp. 1415-1424..

Krishnababu, SK and Dawes, WN and Hodson, HP and Lock, GD and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part II - effect of relative casing motion. In: ASME Turbo Exposition 2007, 2007-5-14 to 2007-5-17, Montreal, Canada pp. 739-748..

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, GD and Hodson, HP and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part I - effect of tip geometry and tip clearance gap. In: ASME Turbo Exposition 2007, 2007-5-14 to 2007-5-17, Montreal, Canada pp. 727-738..

Longley, JP (2007) Calculating stall and surge transients. In: UNSPECIFIED pp. 125-136..

Opoka, MM and Hodson, HP (2007) Transition on the T106 LP turbine blade in the presence of moving upstream wakes and downstream potential fields. In: UNSPECIFIED pp. 1091-1104..

Pullan, G and Harvey, NW (2007) Influence of sweep on axial flow turbine aerodynamics at midspan. ASME Transactions, Journal of Turbomachinery, 129. pp. 591-598. ISSN 0889-504X

Pullan, G and Harvey, NW (2007) The influence of sweep on axial flow turbine aerodynamics in the endwall region. In: ASME Turbo Expo - Power for Land, Sea and Air, 2007-5-14 to 2007-5-17, Montreal, Canada pp. 735-748..

Reid, K and Denton, JD and Pullan, G and Curtis, EM and Longley, JP (2007) The interaction of turbine inter-platform leakage flow with the mainstream flow. Transactions of the ASME Journal of Turbomachinery, 129. pp. 303-310. ISSN 0889-504X

Rosic, B and Denton, JD and Curtis, EM (2007) The influence of shroud and cavity geometry on turbine performance - an experimental and computational study, Part 1: Shroud geometry. In: ASME Turbo Expo - Power for Land, Sea and Air, 2007-5-14 to 2007-5-17, Montreal, Canada pp. 749-760..

Savill, AM and Richardson, GA and Dawes, WN (2007) An unsteady, moving mesh CFD simulation for Harrier hot-gas ingestion control analysis. The Aeronautical Journal, 111. pp. 133-144. ISSN 0001-9240

Simpson, AK and Longley, JP (2007) An experimental study of the inception of rotating stall in a single-stage low-speed axial compressor. In: UNSPECIFIED pp. 87-97..

Thorpe, SJ and Miller, RJ and Yoshino, S and Ainsworth, RW and Harvey, NW (2007) The effect of work processes on the casing heat transfer of a transonic turbine. In: UNSPECIFIED pp. 84-91..

Tian, J and Lu, TJ and Hodson, HP and Queheillalt, DT and Wadley, HNG (2007) Cross flow heat exchange of textile cellular metal core sandwich panels. INT J HEAT MASS TRAN, 50. pp. 2521-2536. ISSN 0017-9310

Tyacke, JC and Tucker, PG (2007) Unsteady CFD modelling for electronics cooling. In: UNSPECIFIED pp. 760-766..

Vera, M and Zhang, XF and Hodson, HP and Harvey, NW (2007) Separation and Transition Control on an Aft-Loaded Ultra-High-Lift LP Turbine Blade at Low Reynolds Numbers: High-Speed Validation. ASME Journal of Turbomachinery, 129. pp. 340-347. ISSN 0889-504X

Wheeler, APS and Miller, RJ and Hodson, HP (2007) The effect of wake induced structures on compressor boundary-layers. In: UNSPECIFIED pp. 705-712..

Wheeler, APS and Sofia, A and Miller, RJ (2007) The effect of leading-edge geometry on wake interactions in compressors. In: UNSPECIFIED pp. 1769-1779..

Xu, J and Tian, J and Lu, TJ and Hodson, HP (2007) On the thermal performance of wire-screen meshes as heat exchanger material. INT J HEAT MASS TRAN, 50. pp. 1141-1154. ISSN 0017-9310

2006

Crichton, D and Xu, LP and Hall, CA (2006) Preliminary fan design for a silent aircraft. In: UNSPECIFIED pp. 1663-1672..

Dawes, WN (2006) Eliminating serial bottlenecks not just in the flow solving but also in mesh generation & geometry management. In: UNSPECIFIED pp. 1355-1362..

Hall, CA and Crichton, D (2006) Engine design studies for a silent aircraft. In: UNSPECIFIED pp. 1653-1662..

Hall, CA and Hynes, TP (2006) Measurements of intake separation hysteresis in a model fan and nacelle rig. Journal of Propulsion and Power (AIAA), 22. pp. 872-879. ISSN 0748-4658

Karabasov, SA and Hynes, TP (2006) A method for solving compressible flow equations in an unsteady free stream. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220. pp. 185-202. ISSN 0954-4062

Kim, T and Hodson, HP and Lu, TJ (2006) On the prediction of pressure drop across banks of inclined cylinders. International Journal of Heat and Fluid Flow, 27. pp. 311-318. ISSN 0142-727X

Molinari, M and Dawes, WN (2006) Review of evolution of compressor design process and future perspectives. P I MECH ENG C-J MEC, 220. pp. 761-771. ISSN 0954-4062

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2006) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. Transactions of the ASME, Journal of Turbomachinery, 128. pp. 300-309. ISSN 0889-504X

Ong, J and Miller, RJ and Uchida, S (2006) The effect of coolant injection on the endwall flow of a high pressure turbine. In: ASME Turbo Exposition, 2006-5- to --, Barcelona, Spain.

Ong, JHP and Miller, RJ and Uchida, S (2006) The effect of coolant injection on the endwall flow of a high pressure turbine. In: UNSPECIFIED pp. 915-924..

Opoka, MM and Thomas, RL and Hodson, HP (2006) Boundary layer transition on the high lift T106A LP turbine blade with an oscillating downstream pressure field. In: UNSPECIFIED pp. 1899-1909..

Pullan, G (2006) Secondary flows caused by blade row interaction in a turbine stage. Transactions of the ASME Journal of Turbomachinery, 128. 484-. ISSN 0889-504X

Pullan, G and Denton, JD and Curtis, EM (2006) Improving the performance of a turbine with low aspect ratio stators by aft-loading. ASME Transactions, Journal of Turbomachinery, 128. pp. 492-499. ISSN 0889-504X

Pullan, G and Harvey, NW (2006) The influence of sweep on axial flow turbine aerodynamics at mid-span. In: UNSPECIFIED pp. 925-935..

Reid, K and Denton, JD and Pullan, G and Curtis, EM and Longley, JP (2006) The effect of stator-rotor hub sealing flow on the mainstream aerodynamics of a turbine. In: ASME Turbo Expo — Land, Sea and Air, Gas Turbine Conference, 2006-5-8 to 2006-5-11, Barcelona, Spain pp. 789-798..

Richardson, GA and Dawes, WN and Savill, AM (2006) CFD analysis of hot gas ingestion mechanisms for the vertical descent phase of a harrier aircraft. In: UNSPECIFIED pp. 165-174..

Rosic, B and Denton, JD and Pullan, G (2006) The importance of shroud leakage modeling in multistage turbine flow calculations. Transactions of ASME, Journal of Turbomachinery, 128. pp. 699-707. ISSN 0889-504X

Vera, M and Hodson, HP and Vazquez Diaz, R (2006) The effect of Mach number on LP turbine blade wake interaction. In: Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. Springer, pp. 203-216.

Wheeler, APS and Miller, RJ and Hodson, HP (2006) The effect of wake induced structures on compressor boundary-layers. In: UNSPECIFIED pp. 1875-1885..

Wissink, JG and Rodi, W and Hodson, HP (2006) The influence of disturbances carried by periodically incoming wakes on the separating flow around a turbine blade. International Journal of Heat and Fluid Flow, 27. pp. 721-729. ISSN 0142-727X

Zhang, XF and Hodson, HP (2006) Parametric study of surface roughness and wake unsteadiness on a flat plate with large pressure gradient. In: UNSPECIFIED pp. 331-344..

de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2006) Effect of the leakage flows and the upstream platform geometry on the endwall flows of a turbine cascade. In: ASME Turbo Expo 2006, 2006-5-8 to 2006-5-11, Barcelona, Spain pp. 733-744..

2005

Ciardi, M and Sagaut, P and Dawes, WN (2005) A dynamic finite volume scheme for large-eddy simulation on unstructured grids. Journal of Computational Physics, 210. pp. 632-655. ISSN 0021-9991

Dawes, WN (2005) Rapid prototyping design optimisation using flow sculpting. In: ASME Turbo Expo 2005: Power for Land, Sea and Air, 2005-6- to --, Reno, NV, US pp. 991-1000..

Dowling, AP and Morgans, AS (2005) Feedback control of combustion oscillations. Annual Review of Fluid Mechanics, 37. pp. 151-182. ISSN 0066-4189

Fuller, AJ and Kim, T and Hodson, HP and Lu, TJ (2005) Measurement and interpretation of the heat transfer coefficients of metal foams. Proceedings of the Institute of Mechanical Engineers C: Journal of Mechanical Engineering Science, 219. pp. 183-192. ISSN 0954-4062

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2005) Three-dimensional separations in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 127. pp. 331-339. ISSN 0889-504X

Hall, CA and Hynes, TP (2005) Nacelle interaction with natural wind before take-off. Journal of Propulsion and Power (AIAA), 21. pp. 784-791. ISSN 0748-4658

Hodson, HP and Howell, RJ (2005) Bladerow interactions, transition, and high-lift aerofoils in low-pressure turbines. Annual Review of Fluid Mechanics, 37. pp. 71-98. ISSN 0066-4189

Hodson, HP and Howell, RJ (2005) The role of transition in high lift low pressure turbines for aeroengines. Progress in Aerospace Science, 41. pp. 419-454. ISSN 0376-0421

Horlock, JH and Denton, JD (2005) A review of some early design practice using computational fluid dynamics and a current perspective. Transactions of the ASME, Journal of Turbomachinery, 127. pp. 5-13. ISSN 0889-504X

Kim, T and Hodson, HP and Lu, TJ (2005) Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material. International Journal of Heat and Mass Transfer, 48. pp. 4243-4264. ISSN 0017-9310

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-objective optimisation of turbomachinery blades using Tabu Search. In: Proceedings of the 3rd International Conference on Evolutionary Multi-Criterion Optimization, 2005-3-9 to 2005-3-11, Guanajuato, Mexico pp. 897-910..

Morgans, AS and Dowling, AP (2005) Model-based control of combustion instabilities. In: ASME Turbo Expo 2005, 2005-6- to --, Reno, NV, US pp. 773-784..

Morgans, AS and Karabasov, SA and Dowling, AP and Hynes, TP (2005) Transonic helicopter noise. AIAA Journal, 43. pp. 1512-1524. ISSN 0001-1452

Parikesit, GO and Markesteijn, AP and Kutchoukov, VG and Piciu, O and Bossche, A and Westerweel, J and Garini, Y and Young, IT (2005) Electroosmotic flow analysis of a branched U-turn nanofluidic device. Lab Chip, 5. pp. 1067-1074. ISSN 1473-0197

Payne, SJ and Ainsworth, RW and Miller, RJ and Moss, RW and Harvey, NW (2005) Unsteady loss in a high pressure turbine stage: interaction effects. International Journal of Heat and Fluid Flow, 26. pp. 695-708. ISSN 0142-727X

Pullan, G and Denton, J and Curtis, E (2005) Improving the performance of a turbine with low aspect ratio stators by AFT-loading. In: UNSPECIFIED pp. 579-589..

Reid, K and Denton, J and Pullan, G and Curtis, E and Longley, J (2005) The interaction of turbine inter-platform leakage flow with the mainstream flow. In: UNSPECIFIED pp. 429-437..

Rosic, B and Denton, JD and Pullan, G (2005) The importance of shroud leakage modelling in multistage turbine flow calculations. In: UNSPECIFIED pp. 561-570..

Stieger, RD and Hodson, HP (2005) The unsteady development of a turbulent wake through a downstream low-pressure turbine blade passage. Transactions of the ASME Journal of Turbomachinery, 127. pp. 388-394. ISSN 0889-504X

Zhang, XF and Hodson, HP and Harvey, NW (2005) Unsteady boundary layer studies on ultra-high lift low pressure turbine blades. Proceedings of the Institute of Mechanical Engineers Part A: Journal of Power and Energy, 219. pp. 451-460. ISSN 0957-6509

Zhang, XF and Vera, M and Hodson, HP and Harvey, NW (2005) Separation and transition control on an aft-loaded ultra-high-lift LP turbine blade at low Reynolds numbers: low-speed investigation. Transactions of the ASME Journal of Turbomachinery, 128. pp. 517-527. ISSN 0889-504X

Zhao, CY and Lu, TJ and Hodson, HP (2005) Natural convection in metal foams with open cells. International Journal of Heat and Mass Transfer, 48. pp. 2452-2463. ISSN 0017-9310

de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2005) Effect of upstream platform geometry on the endwall flows of a turbine cascade. In: ASME Turbo Expo 2005, 2005-6- to --, Reno, NV, USA pp. 735-746..

2004

Brear, MJ and Hodson, HP (2004) The effect of wake passing on a flow separation in a low-pressure rurbine cascade. J FLUID ENG-T ASME, 126. pp. 250-256. ISSN 0098-2202

Cant, RS and Dawes, WN and Savill, AM (2004) Advanced CFD and modelling of accidental explosions. Annual Review of Fluid Mechanics, 36. pp. 97-119. ISSN 0066-4189

Chaluvadi, VSP and Kalfas, AI and Hodson, HP (2004) Vortex transport and blade interactions in high pressure turbines. Transactions of the ASME Journal of Turbomachinery, 126. pp. 395-405. ISSN 0889-504X

Ciardi, M and Dawes, WN (2004) Large eddy and detached eddy simulations for broadband noise prediction in complex geometries. In: UNSPECIFIED UNSPECIFIED, pp. 489-498.

Dowling, AP and Hynes, TP (2004) Sound generation by turbulence. European Journal of Mechanics, Series B: Fluids, 23. pp. 491-500. ISSN 0997-7546

Gbadebo, SA and Hynes, TP and Cumpsty, NA (2004) Influence of surface roughness on three-dimensional separation in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 126. pp. 455-463. ISSN 0889-504X

Hall, CA (2004) Engine configurations for the silent aircraft. Journal of the Acoustical Society of America, 116. p.2538-. ISSN 0001-4966

Kim, T and Hodson, HP and Lu, TJ (2004) Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger. In: UNSPECIFIED pp. 1321-1336..

Kim, T and Hodson, HP and Lu, TJ (2004) Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material. International Journal of Heat and Mass Transfer, 47. pp. 1129-1140. ISSN 0017-9310

Kim, T and Zhao, CY and Lu, TJ and Hodson, HP (2004) Convective heat dissipation with lattice-frame materials. Mechanics of Materials, 36. pp. 767-780. ISSN 0167-6636

Morgans, AS and Dowling, AP (2004) Low order modeling for transonic helicopter noise. AIAA Journal, 42. pp. 2416-2428. ISSN 0001-1452

Stieger, R and Hodson, HP (2004) The transition mechanism of highly-loaded LP turbine blades. ASME Journal of Turbomachinery, 126. pp. 536-543. ISSN 0889-504X

Stieger, R and Hollis, D and Hodson, HP (2004) Unsteady surface pressure due to wake induced transition in a laminar separation bubble on an LP turbine cascade. Transactions of the ASME Journal of Turbomachinery, 126. pp. 544-550. ISSN 0889-504X

Tian, J and Kim, T and Lu, TJ and Hodson, HP and Queheillalt, DT and Sypeck, DJ and Wadley, HNG (2004) The effect of topology upon fluid-flow and heat-transfer with cellular copper structures. International Journal of Heat and Mass Transfer, 47. pp. 3171-3186. ISSN 0017-9310

Vera, M and Hodson, HP and Vasquez, R (2004) The effects of a trip wire and unsteadiness on a high-speed highly loaded low-pressure turbine blade. Transactions of the ASME Journal of Turbomachinery, 127. pp. 747-754. ISSN 0889-504X

Vicedo, J and Vilmin, S and Dawes, WN and Savill, AM (2004) Intermittency transport modeling of separated flow transition. Journal of Turbomachinery, 126. pp. 424-431. ISSN 0889-504X

Zhao, CY and Kim, T and Lu, TJ and Hodson, HP (2004) Thermal transport in high porosity cellular metal foams. Journal of Thermophysics and Heat Transfer, 18. pp. 309-317. ISSN 0887-8722

Zhao, CY and Lu, TJ and Hodson, HP (2004) Measurements of thermal radiation in ultralight metal foams with open cells. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218. pp. 1297-1308. ISSN 0954-4062

Zhao, CY and Lu, TJ and Hodson, HP (2004) Thermal radiation in ultralight metal foams with open cells. International Journal of Heat and Mass Transfer, 47. pp. 2927-2939. ISSN 0017-9310

Zhao, CY and Lu, TJ and Hodson, HP and Jackson, JD (2004) The temperature dependence of effective thermal conductivity of open-celled steel alloy foams. Materials Science and Engineering A, 367. pp. 123-131. ISSN 0921-5093

2003

Biktasheva, IV and Biktashev, VN and Dawes, WN and Holden, AV and Saumarez, RC and Savill, AM (2003) Dissipation of the excitation front as a mechanism of self-terminating arrhhythmias. International Journal of Bifurcation and Chaos, 13. pp. 3645-3655. ISSN 0218-1274

Blanco, EDL and Hodson, HP and Vazquez, R and Torre, D (2003) Influence of the state of the inlet endwall boundary layer on the interaction between pressure surface separation and endwall flows. In: UNSPECIFIED pp. 433-441..

Brear, MJ and Hodson, HP (2003) The response of a laminar separation bubble to 'aircraft engine representative' freestream disturbances. Experiments in Fluids, 35. pp. 610-617. ISSN 0723-4864

Chaluvadi, VSP and Kalfas, AI and Banieghbal, MR and Hodson, HP and Ohyama, H and Watanabe, E (2003) Blade row interaction in a high pressure steam turbine. Transactions of the ASME Journal of Turbomachinery, 125. pp. 14-24. ISSN 0889-504X

Liu, JJ and Hynes, TP (2003) The investigation of turbine and exhaust interactions in asymmetric flows-blade-row models applied. Transactions of the ASME, Journal of Turbomachinery, 125. pp. 121-127. ISSN 0889-504X

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2003) Wake, shock and potential field interactions in a 1.5 stage turbine - Part I: Vane-rotor and rotor-vane interaction. ASME Transactions, Journal of Turbomachinery, 125. pp. 33-39. ISSN 0889-504X

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2003) Wake, shock and potential field interactions in a 1.5 stage turbine - Part II: Vane-vane interactions and discussion of results. ASME Transactions, Journal of Turbomachinery, 125. pp. 40-47. ISSN 0889-504X

Miller, RJ and Moss, RW and Ainsworth, RW and Horwood, CK (2003) Time-resolved vane-rotor interaction in a high-pressure turbine stage. ASME Transactions, Journal of Turbomachinery, 125. pp. 1-13. ISSN 0889-504X

Payne, SJ and Ainsworth, RW and Miller, RJ and Moss, RW and Harvey, NW (2003) Unsteady loss in a high pressure turbine stage. International Journal of Heat and Fluid Flow, 24. pp. 698-708. ISSN 0142-727X

Pullan, G and Denton, JD and Dunkley, MJ (2003) An experimental and computational study of the formation of a streamwise shed vortex in a turbine stage. ASME Transacations, Journal of Turbomachinery, 125. pp. 291-297. ISSN 0889-504X

Stieger, RD and Hodson, HP (2003) Unsteady dissipation measurements on a flat plate subject to wake passing. In: UNSPECIFIED pp. 413-419..

Wang, GL and Fu, YT and Welland, ME and Hodson, HP and Ma, JS (2003) Study on a novel optical fiber pressure sensor. In: UNSPECIFIED pp. 195-200..

Xu, L (2003) Assessing viscous body forces for unsteady calculations. ASME Transactions, Journal of Turbomachinery, 125. pp. 425-432. ISSN 0889-504X

Xu, L and Hynes, TP and Denton, JD (2003) Towards long length scale unsteady modelling in turbomachines. P I MECH ENG A-J POW, 217. pp. 75-82. ISSN 0957-6509

Xu, L and Hynes, TP and Denton, JD (2003) Towards long length scale unsteady modelling in turbomachines. Proceedings of the Institution of Mechanical Engineers Part A, Journal of Power and Energy, 217. pp. 75-82. ISSN 0957-6509

Zhong, S and Chong, TP and Hodson, HP (2003) A comparison of spreading angles of turbulent wedges in velocity and thermal boundary layers. Transactions of the ASME Journal of Fluids Engineering, 125. pp. 267-274. ISSN 0098-2202

2002

Brear, MJ and Hodson, HP and Gonzalez, P and Harvey, NW (2002) Pressure surface separations in low-pressure turbines — part 2: Interactions with the secondary flow. ASME Journal of Turbomachinery, 124. pp. 402-409. ISSN 0889-504X

Brear, MJ and Hodson, HP and Harvey, NW (2002) Pressure surface separations in low pressure turbines: part 1 of 2 - midspan behaviour. Transactions of the ASME Journal of Turbomachinery, 124. pp. 393-401. ISSN 0889-504X

Chong, TP and Zhong, S and Hodson, HP (2002) Visualization of turbulent wedges under favourable pressure gradients using shear-sensitive and temperature-sensitive liquid crystals. In: Visualization and Imaging in Transport Phenomena. Annals of the New York Academy of Sciences, 972 . New York Academy of Sciences, New York, pp. 95-102.

Gonzalez, P and Ulizar, JI and Vazquez, R and Hodson, HP (2002) Pressure and suction surfaces redesign for high lift low pressure turbines. Transactions of the ASME Journal of Turbomachinery, 124. pp. 161-166. ISSN 0889-504X

Howell, RJ and Hodson, HP and Schulte, V and Stieger, RD and Schiffer, HP and Haselbach, F and Harvey, NW (2002) Boundary layer development in the BR710 and BR715 LP turbines - implementation of high lift and ultra high lift concepts. ASME Journal of Turbomachinery, 124. pp. 385-392. ISSN 0889-504X

Stow, SR and Dowling, AP and Hynes, TP (2002) Reflection of circumferential modes in a choked nozzle. Journal of Fluid Mechanics, 467. pp. 215-240. ISSN 0022-1120

Yao, YF and Savill, AM and Sandham, ND and Dawes, WN (2002) Simulation and modelling of turbulent trailing edge flow. Flow, Turbulence and Combustion, 68. pp. 313-333. ISSN 1386-6184

2001

Babinsky, H and Kuschel, U and Hodson, HP and Moore, DF and Welland, ME (2001) Geometries for five-hole-type probes with planar sensor arrays. AIAA Journal, 39. pp. 2414-2416. ISSN 0001-1452

Chaluvadi, VSP and Kalfas, AI and Banieghbal, MR and Hodson, HP and Denton, JD (2001) Blade row interaction in a high pressure turbine. AIAA Journal of Propulsion and Power, 17. pp. 892-901. ISSN 0748-4658

Dambach, R and Hodson, HP (2001) Tip leakage flow in a radial inflow turbine with varying gap height. AIAA Journal of Propulsion and Power, 17. pp. 644-650. ISSN 0748-4658

Dawes, WN and Dhanasekaran, PC and Demargne, AAJ and Kellar, WP and Savill, AM (2001) Reducing bottlenecks in the CAD-to-mesh-to-solution cycle time to allow CFD to participate in design. Transactions of the ASME Journal of Turbomachinery, 123. pp. 552-557. ISSN 0889-504X

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. In: UNSPECIFIED pp. 675-685..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. Proceedings of Institution of Mechanical Engineers, PT A: Journal of Power and Energy, 215. pp. 675-685. ISSN 0957-6509

2000

Ainsworth, RW and Miller, RJ and Moss, RW and Thorpe, SJ (2000) Unsteady pressure measurement. Measurement Science and Technology, 11. pp. 1055-1076. ISSN 0957-0233

De Foy, B and Dawes, WN (2000) Unstructured pressure-correction solver based on a consistent discretization of the Poisson equation. International Journal of Numerical Methods in Fluids, 34. pp. 463-478. ISSN 0271-2091

Howell, RJ and Ramesh, ON and Hodson, HP and Harvey, NW and Schulte, V (2000) High lift and aft loaded profiles for low pressure turbines. Transactions of the ASME Journal of Turbomachinery, 123. pp. 181-188. ISSN 0889-504X

Vicedo, J and Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2000) The extension of CFD-friendly turbulence modelling to include transition. In: 8th European Turbulence Conference (ETC-8), 2000-6-27 to 2000-6-30, Barcelona, Spain pp. 213-218..

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (2000) Visualisation of turbulent spots under the influence of adverse pressure gradients. Journal of Experiments in Fluids, 28. pp. 385-393. ISSN 0723-4864

1999

Denton, JD and Xu, L (1999) The exploitation of three-dimensional flow in turbomachinery design. P I MECH ENG C-J MEC, 213. pp. 125-137. ISSN 0954-4062

Harvey, NW and Schulte, V and Howell, RJ and Hodson, HP (1999) The role of research in the aerodynamic design of an advanced low-pressure turbine. Proceedings of the Institution of Mechanical Engineers Part A, Journal of Power and Energy, 213. pp. 235-242. ISSN 0957-6509

Kellar, WP and Savill, AM and Dawes, WN (1999) Integrated CAD/CFD visualisation of a generic Formula 1 car front wheel flowfield. In: Lecture Notes in Computer Science. High-Performance Computing and Networking: 7th International Conference, HPCN Europe 1999 Amsterdam, The Netherlands, April 12-14, 1999 Proceedings, 1593 . SpringerVerlagv KG, Germany, pp. 90-98.

Ramesh, ON and Hodson, HP (1999) A new intermittency model incorporating the calming effect. In: 3rd European Conference on Turbomachinery, 1999-3-2 to 1999-3-5, London, UK pp. 243-258..

Seifert, A and Hodson, HP (1999) Periodic turbulent strips and calmed regions in a transitional boundary layer. AIAA Journal, 37. pp. 1127-1128. ISSN 0001-1452

Watterson, JK and Dawes, WN and Savill, AM and White, AJ (1999) Predicting turbulent flow in a staggered tube bundle. International Journal of Heat and Fluid Flow, 20. pp. 581-591. ISSN 0142-727X

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1999) Visualization of turbulent spots and unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. Journal of Optics and Laser Technology, 31. pp. 33-39. ISSN 0030-3992

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1999) A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. Proceedings of the Institution of Mechanical Engineers - Part G - Journal of Aerospace Engineering, 213. pp. 163-172. ISSN 0954-4100

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1999) A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. P I MECH ENG G-J AER, 213. pp. 163-171. ISSN 0954-4100

1998

Denton, JD and Dawes, WN (1998) Computational fluid dynamics for turbomachinery design. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 213. pp. 107-124. ISSN 0954-4062

Konrad, W and Brehm, N and Kameier, F and Freeman, C and Day, IJ (1998) Combustion instability investigations on the BR710 jet engine. In: UNSPECIFIED pp. 34-40..

Schulte, V and Hodson, HP (1998) Prediction of the becalmed region for LP turbine profile design. Transactions of the ASME Journal of Turbomachinery, 120. pp. 839-845. ISSN 0889-504X

Watterson, JK and Connell, IJ and Savill, AM and Dawes, WN (1998) A solution-adaptive mesh procedure for predicting confined explosions. International Journal for Numerical Methods in Fluids, 26. pp. 235-247. ISSN 0271-2091

1997

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 2 of 4: compressors. Transactions of the ASME Journal of Turbomachinery, 119. pp. 426-444. ISSN 0889-504X

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 3 of 4: turbines. Transactions of the ASME Journal of Turbomachinery, 119. pp. 225-237. ISSN 0889-504X

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 4 of 4: computations and analyses. Transactions of the ASME Journal of Turbomachinery, 119. pp. 128-139. ISSN 0889-504X

Joo, WG and Hynes, TP (1997) The application of actuator disks to calculations of the flow in turbofan installations. J TURBOMACH, 119. pp. 733-741. ISSN 0889-504X

Joo, WG and Hynes, TP (1997) The simulation of turbomachinery blade rows in asymmetric flow using actuator disks. J TURBOMACH, 119. pp. 723-732. ISSN 0889-504X

Zhong, S and Kittichaikarn, C and Hodson, HP and Ireland, PT (1997) Visualisation of turbulent spots with temperature sensitive liquid crystals. In: UNSPECIFIED pp. 179-188..

1996

Hodson, HP (1996) Unsteady boundary layers on a flat plate disturbed by periodic wakes .2. Measurements of unsteady boundary layers and discussion - Discussion. J TURBOMACH, 118. pp. 344-346. ISSN 0889-504X

Longley, JP and Shin, HW and Plumley, RE and Silkowski, PD and Day, IJ and Greitzer, EM and Tan, CS and Wisler, DC (1996) Effects of rotating inlet distortion on multistage compressor stability. Transactions of the ASME, Journal of Turbomachinery, 118. pp. 181-188. ISSN 0889-504X

O'Sullivan, MN and Krasnodebski, JK and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1996) Computational study of viscous effects on lobed mixer flow features and performance. Journal of Propulsion and Power, 12. pp. 449-456. ISSN 0748-4658

1995

Dawes, WN (1995) A simulation of the unsteady interaction of a centrifugal impeller with its vaned diffuser: flow analysis. Transactions of the ASME Journal of Turbomachinery, 117. P. 213-. ISSN 0889-504X

Hodson, HP and Banieghbal, MR and Dailey, GM (1995) 3-Dimensional interactions in the rotor of an axial turbine. Journal for Propulsion and Power, 11. pp. 196-204. ISSN 0748-4658

Huntsman, I and Hodson, HP (1995) A laminar flow rotor for a radial inflow turbine. Journal for Propulsion and Power, 11. pp. 1170-1178. ISSN 0748-4658

Hustad, CW and Savill, AM and Dawes, WN (1995) A numerical investigation of aerofoil boundary-layer manipulator profile for cruise flight conditions. Applied Scientific Research, 54. pp. 267-280. ISSN 0003-6994

1994

Dawes, WN (1994) The solution-adaptive numerical simulation of the 3D viscous flow in the serpentine coolant passage of a radial inflow turbine blade. Transactions of the ASME Journal of Turbomachinery, 116. pp. 141-148. ISSN 0889-504X

Day, IJ (1994) Axial compressor performance during surge. Journal of Propulsion and Power, 10. pp. 329-336. ISSN 0748-4658

Day, IJ and Freeman, C (1994) The unstable behavior of low and high-speed compressors. Transactions of the ASME, Journal of Turbomachinery, 116. p. 194-. ISSN 0889-504X

Hodson, HP and Huntsman, I and Steele, AB (1994) An investigation of boundary layer development in a multistage LP turbine. Transactions of the ASME Journal of Turbomachinery, 116. pp. 375-383. ISSN 0889-504X

Longley, JP (1994) A review of nonsteady flow models for compressor stability. Transactions of the ASME Journal of Turbomachinery, 116. pp. 202-215. ISSN 0889-504X

1993

DOMINY, RG and HODSON, HP (1993) AN INVESTIGATION OF FACTORS INFLUENCING THE CALIBRATION OF 5-HOLE PROBES FOR 3-DIMENSIONAL FLOW MEASUREMENTS. In: UNSPECIFIED pp. 513-519..

Dawes, WN (1993) The extension of a solution-adaptive 3D Navier-Stokes solver towards geometries of arbitrary complexity. Transaction of the ASME Journal of Turbomachinery, 115. p. 283-. ISSN 0889-504X

Dawes, WN (1993) The practical application of solution-adaption to the numerical simulation of complex turbomachinery problems. pp. 221-269.

Day, IJ (1993) Active suppression of rotating stall and surge in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 115. pp. 40-47. ISSN 0889-504X

Day, IJ (1993) Stall inception in axial flow compressors. Transactions of the ASME, Journal of Turbomachinery, 115. pp. 1-9. ISSN 0889-504X

Goyal, R and Dawes, WN (1993) A comparison of the measured and predicted flowfield in a modern fan-bypass configuration. Transactions of the ASME Journal of Turbomachinery, 115. pp. 273-283. ISSN 0889-504X

Heyes, FJG and Hodson, HP (1993) The measurement and prediction of the tip clearance flow in linear turbine cascades. Transactions of the ASME Journal of Turbomachinery, 115. pp. 376-382. ISSN 0889-504X

Paduano, J and Epstein, AH and Valavani, L and Longley, JP and Greitzer, EM and Guenette, GR (1993) Active control of rotating stall in a low-speed axial compressor. Transactions of the ASME Journal of Turbomachinery, 115. pp. 48-56. ISSN 0889-504X

1992

Addison, JS and Hodson, HP (1992) Modelling of unsteady transitional boundary layers. Transactions of the ASME Journal of Turbomachinery, 114. pp. 580-589. ISSN 0889-504X

Dawes, WN (1992) Towards improved throughflow capability: the use of 3D viscous flow solvers in a multistage environment. Transactions of the ASME, Journal of Turbomachinery, 114. p. 8-. ISSN 0889-504X

Dawes, WN (1992) The simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adaptive unstructured mesh methodology. Transactions of the ASME Journal of Turbomachinery, 114. p. 528-. ISSN 0889-504X

HUNTSMAN, I and HODSON, HP and HILL, SH (1992) THE DESIGN AND TESTING OF A RADIAL FLOW TURBINE FOR AERODYNAMIC RESEARCH. J TURBOMACH, 114. pp. 411-418. ISSN 0889-504X

Heyes, FJG and Hodson, HP and Dailey, GM (1992) Effect of blade tip geometry on the tip leakage flow in axial turbine cascades. Journal of Turbomachinery, 114. pp. 643-651. ISSN 0889-504X

Heyes, FJG and Hodson, HP and Dailey, GM (1992) The effect of blade tip geometry on the tip leakage flow in axial turbines. Transactions of the ASME Journal of Turbomachinery, 114. pp. 643-651. ISSN 0889-504X

Hodson, HP and Addison, JS and Shepherdson, CA (1992) Models for unsteady wake-induced transition in axial turbomachines. Journal de Physique III, 2. pp. 545-574. ISSN 1155-4320

1990

Addison, JS and Hodson, HP (1990) Unsteady transition in an axial flow turbine, part 1: measurements on the turbine rotor. Transactions of the ASME Journal of Turbomachinery, 112. pp. 206-214. ISSN 0889-504X

Addison, JS and Hodson, HP (1990) Unsteady transition in an axial flow turbine, part 2: cascade measurements and modelling. Transactions of the ASME Journal of Turbomachinery, 112. pp. 215-221. ISSN 0889-504X

Hodson, HP (1990) Modelling unsteady transition and its effects on profile loss. Transactions of the ASME Journal of Turbomachinery, 112. pp. 691-701. ISSN 0889-504X

Longley, JP and Hynes, TP (1990) Stability of flow through multistage axial compressors. Transactions of the ASME, Journal of Turbomachinery, 112. pp. 126-132. ISSN 0889-504X

1989

Chue, R and Hynes, TP and Greitzer, EM and Tan, CS and Longley, JP (1989) Calculations of inlet distortion induced compressor flow field instability. International Journal of Heat and Fluid Flow, 10. pp. 211-223. ISSN 0142-727X

1988

Dawes, WN (1988) The application of multigrid to Navier-Stokes simulation of 3D flow in axial and radial turbomachinery. International Journal for Numerical Methods in Fluids, 8. pp. 1217-1227. ISSN 1097-0363

XU, L and DENTON, JD (1988) THE BASE-PRESSURE AND LOSS OF A FAMILY OF 4 TURBINE-BLADES. J TURBOMACH, 110. pp. 9-17. ISSN 0889-504X

1987

DONG, Y and GALLIMORE, SJ and HODSON, HP (1987) 3-DIMENSIONAL FLOWS AND LOSS REDUCTION IN AXIAL COMPRESSORS. J TURBOMACH, 109. pp. 354-361. ISSN 0889-504X

Dawes, WN (1987) A numerical analysis of the three dimensional viscous flow in a transonic compressor rotor and comparison with experiment. Transactions of the ASME, Journal of Turbomachinery, 109. pp. 83-90. ISSN 0889-504X

HYNES, TP and GREITZER, EM (1987) A METHOD FOR ASSESSING EFFECTS OF CIRCUMFERENTIAL FLOW DISTORTION ON COMPRESSOR STABILITY. J TURBOMACH, 109. pp. 371-379. ISSN 0889-504X

1986

Dawes, WN (1986) Computation of off-design flows in a transonic compressor rotor. Transactions of the ASME Journal of Engineering for Gas Turbines and Power, 108. pp. 144-150. ISSN 0742-4795

1985

Dawes, WN and Richards, PH (1985) Comparison of inviscid and viscous computations with an interferometrically measured transonic flow. AIAA Journal, 23. p. 834-. ISSN 0001-1452

HODSON, HP (1985) AN INVISCID BLADE-TO-BLADE PREDICTION OF A WAKE-GENERATED UNSTEADY-FLOW. J ENG GAS TURB POWER, 107. pp. 337-344. ISSN 0742-4795

Hodson, HP (1985) Boundary layer transition and separation near the leading edge of a high speed turbine blade. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 107. pp. 127-134. ISSN 0742-4795

Hodson, HP (1985) Measurements of wake-generated unsteadiness in the rotor passages of axial flow turbines. ASME Journal of Engineering for Gas Turbines and Power, 107. pp. 467-476. ISSN 0742-4795

1984

HODSON, HP (1984) BOUNDARY-LAYER-TRANSITION AND SEPARATION NEAR THE LEADING-EDGE OF A HIGH-SPEED TURBINE BLADE. MECH ENG, 106. p. 89. ISSN 0025-6501

HODSON, HP (1984) AN INVISCID BLADE-TO-BLADE PREDICTION OF A WAKE-GENERATED UNSTEADY-FLOW. MECH ENG, 106. p. 85. ISSN 0025-6501

HODSON, HP (1984) MEASUREMENTS OF WAKE-GENERATED UNSTEADINESS IN THE ROTOR PASSAGES OF AXIAL-FLOW TURBINES. MECH ENG, 106. pp. 88-89. ISSN 0025-6501

Hodson, HP (1984) Boundary layer and loss measurements on the rotor of an axial flow turbine. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 106. pp. 391-399. ISSN 0742-4795

1983

Dawes, WN and Richards, PH (1983) A comparison of experimental and numericalresults obtained for the secondary flow in a large turbine cascade. Journal of Physics D: Applied Physics, 16. pp. 539-551. ISSN 0022-3727

HODSON, HP (1983) BOUNDARY-LAYER AND LOSS MEASUREMENTS ON THE ROTOR OF AN AXIAL-FLOW TURBINE. MECH ENG, 105. p. 80. ISSN 0025-6501

1977

DAY, IJ and GREITZER, EM and CUMPSTY, NA (1977) PREDICTION OF COMPRESSOR PERFORMANCE IN ROTATING STALL. MECH ENG, 99. p. 93. ISSN 0025-6501

NULL

Coull, JD and Atkins, NR and Hodson, HP Winglets for Improved Aerothermal Performance of High Pressure Turbines. In: ASME Turbo Expo 2013, 2013-6-3 to 2013-6-7, San Antonio. (Unpublished)

Defoe, JJ and Spakovszky, Z Effects of Boundary Layer Ingestion on the Aero-Acoustics of Transonic Fan Rotors. In: ASME Turbo Expo, 2012-6-11 to 2012-6-15, Copenhagen, Denmark. (Unpublished)

Goodhand, MN and Miller, RJ and Lung, HW THE SENSITIVITY OF 2D COMPRESSOR INCIDENCE RANGE TO IN-SERVICE GEOMETRIC VARIATION. In: ASME Turbo Expo, 2012-6-11 to 2012-6-15, Copenhagen. (Unpublished)

Hazby, H and Xu, L and Shleer, M Study of the Flow in a Vaneless Diffuser at Part Speed Operating Conditions. In: IGTI Gas Turbine Expo 2010, 2010-6-14 to 2010-6-18, Glasgow, UK. (Unpublished)

Jefferson-Loveday, R and Tucker, PG and Northall, JD and Rao, N Differential Equation Specification of Integral Turbulence Length Scales. J. Turbomach., 135. -. (Unpublished)

Lam, YHB and Klus, P and Lam, S and Pullan, G and Yeo, GSH BarraCUDA – a Fast Sequence Mapping Software using Graphics Processing Units. In: UKGPU Conference 2011, 2011-12-14 to 2011-12-14, Goodenough College. (Unpublished)

Rosic, B and Xu, L Blade Lean and Shroud Leakage Flows in Low Aspect Ratio Turbines. ASME J. Turbomachinery, 134. (Unpublished)

Zamboni, G and Xu, L Fan Root Aerodynamics For Large Bypass Gas Turbine Engines: Influence on the Engine Performance and 3D Design. In: IGTI Gas Turbine Expo 2009, 2009-6-8 to 2009-6-12, Orlando, Florida, USA. (Unpublished)

This list was generated on Sat Jan 31 08:25:31 2015 GMT.