Department of Engineering

Prof. Julian Allwood - Publications

Number of items: 230.

Article

Daehn, KE and Serrenho, AC and Allwood, J (2019) Finding the Most Efficient Way to Remove Residual Copper from Steel Scrap. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 50. pp. 1225-1240. ISSN 1073-5615

Horton, PM and Allwood, JM and Cleaver, C (2019) Implementing material efficiency in practice: A case study to improve the material utilisation of automotive sheet metal components. Resources, Conservation and Recycling, 145. pp. 49-66. ISSN 0921-3449

Cleaver, CJ and Allwood, JM (2019) Curvature development in ring rolling. Journal of Materials Processing Technology, 267. pp. 316-337. ISSN 0924-0136

Cabrera Serrenho, A and Drewniok, M and Dunant, C and Allwood, JM (2019) Testing the greenhouse gas emissions reduction potential of alternative strategies for the english housing stock. Resources, Conservation and Recycling, 144. pp. 267-275. ISSN 0921-3449

Dunant, CF and Skelton, ACH and Drewniok, MP and Cullen, JM and Allwood, JM (2019) A marginal abatement cost curve for material efficiency accounting for uncertainty. Resources, Conservation and Recycling, 144. pp. 39-47. ISSN 0921-3449

Allwood, JM and Cleaver, CJ and Loukaides, EG and Music, O and Nagy-Sochacki, A (2019) Folding-shearing: Shrinking and stretching sheet metal with no thickness change. CIRP Annals, 68. pp. 285-288. ISSN 0007-8506

Allwood, J and Gonzalez Cabrera Honorio Serrenho, A and Daehn, KE (2019) Preventing wetting between liquid copper and solid steel: a simple extraction technique. Metallurgical and Materials Transactions B. ISSN 1073-5615 (Unpublished)

Flint, IP and Allwood, JM and Serrenho, AC (2019) Scrap, carbon and cost savings from the adoption of flexible nested blanking. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Dunant, CF and Drewniok, MP and Eleftheriadis, S and Cullen, JM and Allwood, JM (2018) Regularity and optimisation practice in steel structural frames in real design cases. Resources, Conservation and Recycling, 134. pp. 294-302. ISSN 0921-3449

Dunant, CF and Drewniok, MP and Sansom, M and Corbey, S and Cullen, JM and Allwood, JM (2018) Options to make steel reuse profitable: An analysis of cost and risk distribution across the UK construction value chain. Journal of Cleaner Production, 183. pp. 102-111. ISSN 0959-6526

Azevedo, JMC and CabreraSerrenho, A and Allwood, JM (2018) Energy and material efficiency of steel powder metallurgy. Powder Technology, 328. pp. 329-336. ISSN 0032-5910

Lupton, RC and Allwood, JM (2018) Incremental Material Flow Analysis with Bayesian Inference. Journal of Industrial Ecology, 22. pp. 1352-1364. ISSN 1088-1980

Allwood, JM (2018) Unrealistic techno-optimism is holding back progress on resource efficiency. Nature Materials, 17. pp. 1050-1051. ISSN 1476-1122

Dunant, CF and Shanks, W and Drewniok, M and Lupton, RC and Cabrera Serrenho, A and Allwood, JM (2018) How much cement can we do without? Lessons from cement material flows in the UK. Resources, Conservation and Recycling, 141. pp. 441-454. ISSN 0921-3449

Cooper-Searle, S and Livesey, F and Allwood, JM (2018) Why are Material Efficiency Solutions a Limited Part of the Climate Policy Agenda? An application of the Multiple Streams Framework to UK policy on CO<inf>2</inf> emissions from cars. Environmental Policy and Governance, 28. pp. 51-64. ISSN 1756-932X

Allwood, JM and Tekkaya, AE (2017) The Journal of Materials Processing Technology 2007-17. Journal of Materials Processing Technology, 251. pp. 387-388. ISSN 0924-0136

Dunant, CF and Drewniok, MP and Sansom, M and Corbey, S and Allwood, JM and Cullen, JM (2017) Real and perceived barriers to steel reuse across the UK construction value chain. Resources, Conservation and Recycling, 126. pp. 118-131. ISSN 0921-3449

Horton, PM and Allwood, JM (2017) Yield improvement opportunities for manufacturing automotive sheet metal components. Journal of Materials Processing Technology, 249. pp. 78-88. ISSN 0924-0136

Daehn, KE and Cabrera Serrenho, A and Allwood, JM (2017) How Will Copper Contamination Constrain Future Global Steel Recycling? Environmental Science and Technology, 51. pp. 6599-6606.

Cooper, S and Doody, BJ and Allwood, JM (2017) Socio-technical factors influencing current trends in material throughput in the UK automotive industry. Journal of Cleaner Production, 156. pp. 817-827. ISSN 0959-6526

Skelton, ACH and Allwood, JM (2017) The carbon price: a toothless tool for material efficiency? Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 375.

Allwood, JM and Gutowski, TG and Serrenho, AC and Skelton, ACH and Worrell, E (2017) Industry 1.61803: the transition to an industry with reduced material demand fit for a low carbon future. Philos Trans A Math Phys Eng Sci, 375. ISSN 1364-503X

Serrenho, AC and Norman, JB and Allwood, JM (2017) The impact of reducing car weight on global emissions: the future fleet in Great Britain. Philos Trans A Math Phys Eng Sci, 375. ISSN 1364-503X

Lupton, RC and Allwood, JM (2017) Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use. Resources, Conservation and Recycling, 124. pp. 141-151. ISSN 0921-3449

Cleaver, C and Allwood, J (2017) Incremental profile ring rolling with axial and circumferential constraints. CIRP Annals, 66. pp. 285-288. ISSN 0007-8506 (Unpublished)

Skelton, ACH and Allwood, JM (2017) Questioning demand: A study of regretted purchases in Great Britain. Ecological Economics, 131. pp. 499-509. ISSN 0921-8009

Ramage, MH and Burridge, H and Busse-Wicher, M and Fereday, G and Reynolds, T and Shah, DU and Wu, G and Yu, L and Fleming, P and Densley-Tingley, D and Allwood, J and Dupree, P and Linden, PF and Scherman, O (2016) The wood from the trees: The use of timber in construction. Renewable and Sustainable Energy Reviews, 68. pp. 333-359. ISSN 1364-0321

Worrell, E and Allwood, J and Gutowski, T (2016) The Role of Material Efficiency in Environmental Stewardship. Annual Review of Environment and Resources, 41. pp. 575-598. ISSN 1543-5938

McBrien, M and Serrenho, AC and Allwood, JM (2016) Potential for energy savings by heat recovery in an integrated steel supply chain. Applied Thermal Engineering, 103. pp. 592-606. ISSN 1359-4311

Allwood, J (2016) Energy: Technology alone won't save climate. Nature, 530. 281-.

Gonzalez Cabrera Honorio Serrenho, A and Allwood, JM (2016) Material Stock Demographics: Cars in Great Britain. Environmental Science & Technology, 50. pp. 3002-3009.

Kopec, G and Allwood, J and Cullen, J and Ralph, D (2016) Corrigendum to: A general nonlinear least squares data reconciliation and estimation method for material flow analysis: data reconciliation for MFA (Journal of Industrial Ecology, (2016), 20, 5, (1038-1049), 10.1111/jiec.12344). Journal of Industrial Ecology, 20. p. 1438. ISSN 1088-1980

Serrenho, AC and Mourão, ZS and Norman, J and Cullen, JM and Allwood, JM (2016) The influence of UK emissions reduction targets on the emissions of the global steel industry. Resources, Conservation and Recycling, 107. pp. 174-184. ISSN 0921-3449

Allwood, JM (2016) Sustainable materials. Nature Reviews Materials, 1.

Loukaides, EG and Allwood, JM (2016) Automatic design of sheet metal forming processes by “un-forming”. International Journal of Mechanical Sciences, 113. pp. 61-70. ISSN 0020-7403

Allwood, JM and Duncan, SR and Cao, J and Groche, P and Hirt, G and Kinsey, B and Kuboki, T and Liewald, M and Sterzing, A and Tekkaya, AE (2016) Closed-loop control of product properties in metal forming. CIRP Annals - Manufacturing Technology, 65. pp. 573-596. ISSN 0007-8506

Cleaver, CJ and Arthington, MR and Mortazavi, S and Allwood, JM (2016) Ring rolling with variable wall thickness. CIRP Annals - Manufacturing Technology, 65. pp. 281-284. ISSN 0007-8506

Allwood, JM and Tekkaya, AE (2016) Writing for the benefit of the reader. Journal of Materials Processing Technology, 227. A1-A5. ISSN 0924-0136

Leal-Ayala, DR and Allwood, JM and Petavratzi, E and Brown, TJ and Gunn, G (2015) Mapping the global flow of tungsten to identify key material efficiency and supply security opportunities. Resources, Conservation and Recycling, 103. pp. 19-28. ISSN 0921-3449

McBrien, M and Allwood, JM and Barekar, NS (2015) Tailor Blank Casting - Control of sheet width using an electromagnetic edge dam in aluminium twin roll casting. Journal of Materials Processing Technology, 224. pp. 60-72. ISSN 0924-0136

Cooper, S and Skelton, ACH and Owen, A and Densley-Tingley, D and Allwood, JM (2015) A multi-method approach for analysing the potential employment impacts of material efficiency. Resources, Conservation and Recycling, 109. pp. 54-66. ISSN 0921-3449

Allwood, JM and Childs, THC and Clare, AT and De Silva, AKM and Dhokia, V and Hutchings, IM and Leach, RK and Leal-Ayala, DR and Lowth, S and Majewski, CE and Marzano, A and Mehnen, J and Nassehi, A and Ozturk, E and Raffles, MH and Roy, R and Shyha, I and Turner, S (2015) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. pp. 729-757. ISSN 0924-0136

Konadu, DD and Mourão, ZS and Allwood, JM and Richards, KS and Kopec, GM and McMahon, RA and Fenner, RA (2015) Not all low-carbon energy pathways are environmentally "no-regrets" options. Global Environmental Change, 35. pp. 379-390. ISSN 0959-3780

Kopec, GM and Allwood, JM and Cullen, JM and Ralph, D (2015) A general nonlinear least squares data reconciliation and estimation method for material flow analysis. Journal of Industrial Ecology, 20. pp. 1038-1049. ISSN 1088-1980

Qin, Y and Curmi, E and Kopec, GM and Allwood, JM and Richards, KS (2015) China's energy-water nexus - assessment of the energy sector's compliance with the "3 Red Lines" industrial water policy. Energy Policy, 82. pp. 131-143. ISSN 0301-4215

Konadu, DD and Mourão, ZS and Allwood, JM and Richards, KS and Kopec, G and McMahon, R and Fenner, R (2015) Land use implications of future energy system trajectories-The case of the UK 2050 Carbon Plan. Energy Policy, 86. pp. 328-337. ISSN 0301-4215

Tekkaya, AE and Allwood, JM and Bariani, PF and Bruschi, S and Cao, J and Gramlich, S and Groche, P and Hirt, G and Ishikawa, T and Löbbe, C and Lueg-Althoff, J and Merklein, M and Misiolek, WZ and Pietrzyk, M and Shivpuri, R and Yanagimoto, J (2015) Metal forming beyond shaping: Predicting and setting product properties. CIRP Annals - Manufacturing Technology, 64. pp. 629-653. ISSN 0007-8506

Polyblank, JA and Allwood, JM (2015) Parametric toolpath design in metal spinning. CIRP Annals - Manufacturing Technology, 64. pp. 301-304. ISSN 0007-8506

Allwood, JM and Tekkaya, AE (2015) Writing a good review for the Journal of Materials Processing Technology. Journal of Materials Processing Technology, 215. V-VII. ISSN 0924-0136

Polyblank, JA and Allwood, JM (2015) Parametric toolpath design in metal spinning. CIRP Annals - Manufacturing Technology. ISSN 0007-8506

Moynihan, MC and Allwood, JM (2014) Utilization of structural steel in buildings. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 470. 20140170-. ISSN 1364-5021

Cooper, DR and Skelton, ACH and Moynihan, MC and Allwood, JM (2014) Component level strategies for exploiting the lifespan of steel in products. Resources, Conservation and Recycling, 84. pp. 24-34. ISSN 0921-3449

Polyblank, JA and Allwood, JM and Duncan, SR (2014) Closed-loop control of product properties in metal forming: A review and prospectus. Journal of Materials Processing Technology, 214. pp. 2333-2348. ISSN 0924-0136

Bajželj, B and Richards, KS and Allwood, JM and Smith, P and Dennis, JS and Curmi, E and Gilligan, CA (2014) Importance of food-demand management for climate mitigation. Nature Climate Change, 4. pp. 924-929. ISSN 1758-678X

Moynihan, MC and Allwood, JM (2014) Viability and performance of demountable composite connectors. Journal of Constructional Steel Research, 99. pp. 47-56. ISSN 0143-974X

Cooper, DR and Allwood, JM (2014) The influence of deformation conditions in solid-state aluminium welding processes on the resulting weld strength. Journal of Materials Processing Technology, 214. pp. 2576-2592. ISSN 0924-0136

Bajželj, B and Allwood, JM and Cullen, JM (2013) Designing climate change mitigation plans that add up. Environ Sci Technol, 47. pp. 8062-8069.

Skelton, ACH and Allwood, JM (2013) The incentives for supply chain collaboration to improve material efficiency in the use of steel: An analysis using input output techniques. Ecological Economics, 89. pp. 33-42. ISSN 0921-8009

Carruth, MA and Allwood, JM (2013) A novel process for transforming sheet metal blanks: Ridged die forming. CIRP Annals - Manufacturing Technology, 62. pp. 267-270. ISSN 0007-8506

Cullen, JM and Allwood, JM (2013) Mapping the global flow of aluminum: from liquid aluminum to end-use goods. Environ Sci Technol, 47. pp. 3057-3064.

Curmi, E and Fenner, RA and Richards, K and Allwood, JM and Bajzelj B., and Kopec G., (2013) Visualising a stochastic model of California Water Resources Using Sankey Diagrams. Water Resources Management, 27. pp. 3035-3050. ISSN 0920-4741

Milford, RL and Pauliuk, S and Allwood, JM and Müller, DB (2013) The roles of energy and material efficiency in meeting steel industry CO2 targets. Environ Sci Technol, 47. pp. 3455-3462.

Pauliuk, S and Milford, RL and Müller, DB and Allwood, JM (2013) The steel scrap age. Environ Sci Technol, 47. pp. 3448-3454.

Allwood, JM and Ashby, MF and Gutowski, TG and Worrell, E (2013) Material efficiency: providing material services with less material production. Philos Trans A Math Phys Eng Sci, 371. 20120496-. ISSN 1364-503X

Allwood, JM (2013) Transitions to material efficiency in the UK steel economy. Philos Trans A Math Phys Eng Sci, 371. 20110577-. ISSN 1364-503X

Gutowski, TG and Sahni, S and Allwood, JM and Ashby, MF and Worrell, E (2013) The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand. Philos Trans A Math Phys Eng Sci, 371. 20120003-. ISSN 1364-503X

Skelton, ACH and Allwood, JM (2013) Product life trade-offs: what if products fail early? Environ Sci Technol, 47. pp. 1719-1728.

Curmi, E and Richards, K and Fenner, R and Allwood, JM and Kopec, GM and Bajželj, B (2013) An integrated representation of the services provided by global water resources. Journal of Environmental Management, 129. pp. 456-462. ISSN 0301-4797

Gutowski, TG and Allwood, JM and Herrmann, C and Sahni, S (2013) A global assessment of manufacturing: Economic development, energy use, carbon emissions, and the potential for energy efficiency and materials recycling. Annual Review of Environment and Resources, 38. pp. 81-106. ISSN 1543-5938

Erman Tekkaya, A and Allwood, JM (2013) JMPT in different countries. Journal of Materials Processing Technology, 213. ISSN 0924-0136

Carruth, MA and Allwood, JM (2013) A novel process for transforming sheet metal blanks: Ridged die forming. CIRP Annals - Manufacturing Technology. ISSN 0007-8506

Cooper, DR and Allwood, JM (2012) Reusing steel and aluminum components at end of product life. Environ Sci Technol, 46. pp. 10334-10340.

Leal-Ayala, DR and Allwood, JM and Schmidt, M and Alexeev, I (2012) Toner-print removal from paper by long and ultrashort pulsed lasers. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 468. pp. 2272-2293. ISSN 1364-5021

Carruth, MA and Allwood, JM (2012) The development of a hot rolling process for variable cross-section I-beams. Journal of Materials Processing Technology, 212. pp. 1640-1653. ISSN 0924-0136

Merklein, M and Allwood, JM and Behrens, BA and Brosius, A and Hagenah, H and Kuzman, K and Mori, K and Tekkaya, AE and Weckenmann, A (2012) Bulk forming of sheet metal. CIRP Annals - Manufacturing Technology, 61. pp. 725-745. ISSN 0007-8506

Music, O and Allwood, JM (2012) The use of spatial impulse responses to characterise flexible forming processes with mobile tools. Journal of Materials Processing Technology, 212. pp. 1139-1156. ISSN 0924-0136

Cullen, JM and Allwood, JM and Bambach, MD (2012) Mapping the global flow of steel: from steelmaking to end-use goods. Environ Sci Technol, 46. pp. 13048-13055.

Moynihan, MC and Allwood, JM (2012) The flow of steel into the construction sector. Resources, Conservation and Recycling, 68. pp. 88-95. ISSN 0921-3449

Bocken, NMP and Allwood, JM and Willey, AR and King, JMH (2012) Development of a tool for rapidly assessing the implementation difficulty and emissions benefits of innovations. Technovation, 32. pp. 19-31. ISSN 0166-4972

Bocken, NMP and Allwood, JM (2012) Strategies to reduce the carbon footprint of consumer goods by influencing stakeholders. Journal of Cleaner Production, 35. pp. 118-129. ISSN 0959-6526

Allwood, JM and Tekkaya, AE (2012) Writing a review paper. Journal of Materials Processing Technology, 212. pp. 1-2. ISSN 0924-0136

Ma, L and Allwood, JM and Cullen, JM and Li, Z (2012) The use of energy in China: Tracing the flow of energy from primary source to demand drivers. Energy, 40. pp. 174-188. ISSN 0360-5442

Merklein, M and Allwood, JM and Behrens, B-A and Brosius, A and Hagenah, H and Kuzman, K and Mori, K and Tekkaya, AE and Weckenmann, A (2012) Bulk forming of sheet metal. CIRP Annals - Manufacturing Technology. ISSN 0007-8506

Bocken, NMP and Allwood, JM (2012) Strategies to reduce the carbon footprint of consumer goods by influencing stakeholders. Journal of Cleaner Production. ISSN 0959-6526

Ma, L and Allwood, JM and Cullen, JM and Li, Z (2012) The use of energy in China: Tracing the flow of energy from primary source to demand drivers. Energy. ISSN 0360-5442

Music, O and Allwood, JM (2012) The use of spatial impulse responses to characterise flexible forming processes with mobile tools. Journal of Materials Processing Technology. ISSN 0924-0136

Bocken, NMP and Allwood, JM and Willey, AR and King, JMH (2011) Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods. J CLEAN PROD, 19. pp. 1279-1287. ISSN 0959-6526

Graedel, TE and Allwood, J and Birat, JP and Buchert, M and Hagelüken, C and Reck, BK and Sibley, SF and Sonnemann, G (2011) What do we know about metal recycling rates? Journal of Industrial Ecology, 15. pp. 355-366. ISSN 1088-1980

Music, O and Allwood, JM (2011) Flexible asymmetric spinning. CIRP Annals - Manufacturing Technology, 60. pp. 319-322. ISSN 0007-8506

Tekkaya, AE and Allwood, JM (2011) Impulse forming. J MATER PROCESS TECH, 211. pp. 785-786. ISSN 0924-0136

Clift, R and Allwood, J (2011) Rethinking the economy. Chemical Engineer. pp. 30-31. ISSN 0302-0797

Cullen, JM and Allwood, JM and Borgstein, EH (2011) Reducing energy demand: what are the practical limits? Environ Sci Technol, 45. pp. 1711-1718.

Oyachi, Y and Allwood, JM (2011) Characterizing the class of local metal sheet thickening processes. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011. pp. 1025-1030.

Allwood, JM (2011) Steel and aluminium in a low carbon future. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011. pp. 27-42.

Music, O and Allwood, JM (2011) Tool-path design for metal spinning. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011. pp. 542-547.

Carruth, MA and Allwood, JM (2011) The forming of variable cross-section I-beams by hot rolling. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011. pp. 165-170.

Carruth, MA and Allwood, JM and Moynihan, MC (2011) The technical potential for reducing metal requirements through lightweight product design. Resources, Conservation and Recycling, 57. pp. 48-60. ISSN 0921-3449

Leal-Ayala, DR and Allwood, JM and Counsell, TAM (2011) Paper un-printing: using lasers to remove toner-print in order to reuse office paper. APPL PHYS A-MATER, 105. pp. 801-818. ISSN 0947-8396

Milford, RL and Allwood, JM and Cullen, JM (2011) Assessing the potential of yield improvements, through process scrap reduction, for energy and CO<inf>2</inf> abatement in the steel and aluminium sectors. Resources, Conservation and Recycling, 55. pp. 1185-1195. ISSN 0921-3449

Tekkaya, AE and Allwood, JM (2011) The editorial board of the journal of materials processing technology. J MATER PROCESS TECH, 211. pp. 1-2. ISSN 0924-0136

Allwood, JM and Ashby, MF and Gutowski, TG and Worrell, E (2011) Material efficiency: A white paper. RESOUR CONSERV RECY, 55. pp. 362-381. ISSN 0921-3449

Bocken, NMP and Allwood, JM and Willey, AR and King, JMH (2011) Development of a tool for rapidly assessing the implementation difficulty and emissions benefits of innovations. Technovation. ISSN 0166-4972

Leal-Ayala, DR and Allwood, JM and Counsell, TAM (2011) Paper un-printing: using lasers to remove toner-print in order to reuse office paper. Applied Physics A: Materials Science and Processing. pp. 1-18. ISSN 0947-8396

Allwood, JM and Tekkaya, AE (2011) Writing a review paper. Journal of Materials Processing Technology. ISSN 0924-0136

Milford, RL and Allwood, JM (2010) Assessing the CO2 impact of current and future rail track in the UK. Transportation Research Part D: Transport and Environment, 15. pp. 61-72. ISSN 1361-9209

Cullen, JM and Allwood, JM (2010) Theoretical efficiency limits for energy conversion devices. Energy, 35. pp. 2059-2069. ISSN 0360-5442

Cullen, JM and Allwood, JM (2010) The efficient use of energy: tracing the global flow of energy from fuel to service. Energy Policy, 38. pp. 75-81. ISSN 0301-4215

Music, O and Allwood, JM and Kawai, K (2010) A review of the mechanics of metal spinning. Journal of Materials Processing Technology, 210. pp. 3-23. ISSN 0924-0136

Allwood, JM and Braun, D and Music, O (2010) The effect of partially cut-out blanks on geometric accuracy in incremental sheet forming. J MATER PROCESS TECH, 210. pp. 1501-1510. ISSN 0924-0136

Shouler, DR and Allwood, JM (2010) Design and use of a novel sample design for formability testing in pure shear. J MATER PROCESS TECH, 210. pp. 1304-1313. ISSN 0924-0136

Allwood, JM and Cullen, JM and Milford, RL (2010) Options for achieving a 50% cut in industrial carbon emissions by 2050. Environ Sci Technol, 44. pp. 1888-1894. ISSN 0013-936X

Leal-Ayala, DR and Allwood, JM (2010) Paper re-use: Toner-print removal by laser ablation. International Conference on Digital Printing Technologies. pp. 6-9.

Allwood, JM and Tekkaya, AE (2010) Classification of reviewers and papers for the Journal of Materials Processing Technology. Journal of Materials Processing Technology, 210. pp. 1-2. ISSN 0924-0136

Allwood, JM and Music, O and Raithathna, A and Duncan, SR (2009) Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools. CIRP Annals: Manufacturing Technology, 58. pp. 287-290. ISSN 0007-8506

Allwood, JM and Shouler, DR (2009) Generalised forming limit diagrams showing increased forming limits with non-planar stress states. International Journal of Plasticity, 25. pp. 1207-1230. ISSN 0749-6419

Allwood, JM and Shouler, DR (2009) Generalised forming limit diagrams showing increased forming limits with non-planar stress states. International Journal of Plasticity, 25. pp. 1207-1230. ISSN 0749-6419

Cullen, JM and Allwood, JM (2009) The role of washing machines in life cycle assessment studies: the dangers of using LCA for prioritization. Journal of Industrial Ecology, 13. pp. 27-37. ISSN 1088-1980

Counsell, TAM and Allwood, JM (2009) Using abrasives to remove toner-print so that office paper might be reused. Wear, 266. pp. 782-794. ISSN 0043-1648

Counsell, TAM and Allwood, JM (2009) Using solvents to remove a toner print so that office paper might be reused. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 465. pp. 3839-3858. ISSN 1364-5021

Allwood, JM and Tekkaya, AE (2009) Knowledge in materials processing technology. Journal of Materials Processing Technology, 209. pp. 1-2. ISSN 0924-0136

Russell, SN and Allwood, JM (2008) Environmental evaluation of localising production as a strategy for sustainable development: a case study of two consumer goods in Jamaica. Journal of Cleaner Production, 16. pp. 1327-1338. ISSN 0959-6526

Allwood, JM and Laursen, SE and Russell, SN and Malvido, C and Bocken, NMP (2008) An approach to scenario analysis of the sustainability of an industrial sector applied to clothing and textiles in the UK. Journal of Cleaner Production, 16. pp. 1234-1246. ISSN 0959-6526

Russell, SN and Allwood, JM (2008) Environmental evaluation of localising production as a strategy for sustainable development: a case study of two consumer goods in Jamaica. Journal of Cleaner Production, 16. pp. 1327-1338. ISSN 0959-6526

Jackson, KR and Allwood, JM and Landert, M (2008) Incremental forming of sandwich panels. J MATER PROCESS TECH, 204. pp. 290-303. ISSN 0924-0136

Allwood, JM and Laursen, SE and Russell, SN and de Rodríguez, CM and Bocken, NMP (2008) An approach to scenario analysis of the sustainability of an industrial sector applied to clothing and textiles in the UK. Journal of Cleaner Production, 16. pp. 1234-1246. ISSN 0959-6526

Tekkaya, AE and Allwood, JM (2008) Untitled. J MATER PROCESS TECH, 195. pp. 1-2. ISSN 0924-0136

Counsell, TAM and Allwood, JM (2008) Meeting the 2050 carbon target for paper by print removal. CIRP ANN-MANUF TECHN, 57. pp. 25-28. ISSN 0007-8506

Groche, P and Fritsche, D and Tekkaya, EA and Allwood, JM and Hirt, G and Neugebauer, R (2007) Incremental bulk metal forming. CIRP: Annals, 56. pp. 635-656. ISSN 0007-8506

Allwood, JM and Shouler, DR (2007) Paddle forming: a novel class of sheet metal forming processes. Annals of CIRP, 56. pp. 257-260. ISSN 0007-8506

Counsell, TAM and Allwood, JM (2007) Reducing climate change gas emissions by cutting out stages in the life cycle of office paper. Resources Conservation and Recycling, 49. pp. 340-352. ISSN 0921-3449

Counsell, TAM and Allwood, JMA (2007) Using laser ablation to remove toner-print so that office paper might be reused. Applied Physics A: Materials Science & Processing. ISSN 0947-8396

Counsell, TAM and Allwood, JM (2007) Using solvents to remove a toner-print so that office paper might be reused. Proceedings of the Royal Society of London: Series A, Mathematical and Physical Sciences. ISSN 1364-5021

Jackson, KP and Allwood, JM (2007) The mechanics of incremental sheet forming. Journal of Materials Processing Technology, 209. pp. 1158-1174. ISSN 0924-0136

Counsell, TAM and Allwood, JM (2007) A review of technology options for reducing the environmental impact of office paper. Resources Conservation and Recycling, 49. pp. 340-352. ISSN 0921-3449

Allwood, JM (2007) A structured search for novel manufacturing processes leading to a periodic table of ring rolling machines. J MECH DESIGN, 129. pp. 502-511. ISSN 1050-0472

Stanistreet, TF and Allwood, JM and Willoughby, AM (2006) The design of a flexible model ring rolling machine. Journal of Materials Processing Technology, 177. pp. 630-633. ISSN 0924-0136

Allwood, JM and Bramley, AN and Ridgman, TW and Mileham, AR (2006) A novel method for the rapid production of inexpensive dies and moulds with surfaces made by incremental sheet forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220. pp. 323-327. ISSN 0954-4054

Allwood, JM and Utsunomiya, H (2006) A survey of flexible forming processes in Japan. International Journal of Machine Tools and Manufacture, 46. pp. 1939-1960. ISSN 0890-6955

Stanistreet, TF and Allwood, JM and Willoughby, AM (2006) The design of a flexible model ring rolling machine. Journal of Materials Processing Technology, 177. pp. 630-633. ISSN 0924-0136

Counsell, TAM and Allwood, JM (2006) Desktop paper recycling: a survey of novel technologies that might recycle office paper within the office. Journal of Materials Processing Technology, 173. pp. 111-123.

Counsell, TAM and Allwood, JM (2006) Desktop paper recycling: a survey of novel technologies that might recycle office paper within the office. Journal of Materials Processing Technology, 173. pp. 111-123. ISSN 0924-0136

Jeswiet, J and Micari, F and Hirt, G and Bramley, A and Duflou, J and Allwood, J (2005) Asymmetric single point incremental forming of sheet metal. CIRP Annals: Manufacturing Technology, 54. pp. 88-114. ISSN 0007-8506

Allwood, J (2005) Survey and performance assessment of solution methods for elastic rough contact problems. Transactions of the ASME: Journal of Tribology, 127. pp. 10-23. ISSN 0742-4787

Allwood, JM and Lee, JH (2005) The design of an agent for modelling supply chain network dynamics. International Journal of Production Research, 43. pp. 4875-4898. ISSN 0020-7543

Allwood, JM and Tekkaya, AE and Stanistreet, TF (2005) The development of ring rolling technology. Steel Research International, 76. pp. 111-120. ISSN 1611-3683

Allwood, JM and Tekkaya, AE and Stanistreet, TF (2005) The development of ring rolling technology, part 2: Investigation of process behaviour and production equipment. Steel Research International, 76. pp. 491-507. ISSN 1611-3683

Allwood, J and Ciftci, H (2005) An incremental solution method for rough contact problems. Wear, 258. pp. 1601-1615. ISSN 0043-1648

Allwood, JM and King, GPF and Duflou, J (2005) A structured search for applications of the incremental sheet-forming process by product segmentation. Proceedings of the Institution of Mechanical Engineers Part B, Journal of Engineering Manufacture, 219. pp. 239-244. ISSN 0954-4054

Allwood, JM and Kopp, R and Michels, D and Music, O and Oztop, M and Stanistreet, TF and Tekkaya, AE and Tiedemman, I (2005) The technical and commercial potential of an incremental ring rolling process. CIRP Annals: Manufacturing Technology, 54. pp. 233-236. ISSN 0007-8506

Allwood, J and Ciftci, H (2005) An incremental solution method for rough contact problems. Wear, 258. pp. 1601-1615.

Allwood, JM and Lee, JH (2005) The design of an agent for modelling supply chain network dynamics. International Journal of Production Research, 43. pp. 4875-4898. ISSN 0020-7543

Allwood, J (2005) Survey and performance assessment of solution methods for elastic rough contact problems. Journal of Tribology, 127. pp. 10-23.

Jeswiet, J and Micari, F and Hirt, G and Bramley, A and Duflou, J and Allwood, J (2005) Asymmetric single point incremental forming of sheet metal. CIRP Annals - Manufacturing Technology, 54. pp. 88-114. ISSN 0007-8506

Allwood, JM and Lee, WL (2004) The impact of job rotation on problem solving skills. International Journal of Production Research, 42. pp. 865-881.

Allwood, JM and Lee, WL (2004) The impact of job rotation on problem solving skills. International Journal of Production Research, 42. pp. 865-881. ISSN 0020-7543

Lee, WL and Allwood, JM (2003) Lean manufacturing in temperature dependent processes with interruptions. International Journal of Operations & Production Management, 23. pp. 1377-1400. ISSN 0144-3577

Lee, WL and Allwood, JM (2003) Lean manufacturing in temperature dependent processes with interruptions. International Journal of Operations and Production Management, 23. pp. 1377-1400.

Allwood, JM (2002) Model-based evaluation of the effect of horizontal roll offset on cross-directional control performance in cold-strip rolling. IEE Proceedings - Control Theory and Applications, 149. pp. 463-470.

Allwood, JM (2002) Model-based evaluation of the effect of horizontal roll offset on cross-directional control performance in cold-strip rolling. Control Theory and Applications : IEE Proceedings, 149. pp. 463-470. ISSN 1350-2379

Allwood, JM and Cox, BM and Latif, SS (2001) The structured development of simulation-based learning tools with an example for the Taguchi method. IEEE Transactions on Education, 44. pp. 347-354. ISSN 0018-9359

Allwood, JM and Cox, BM and Latif, SS (2001) The structured development of simulation-based learning tools with an example for the Taguchi method. IEEE Transactions on Education, 44. pp. 347-354.

Duncan, SR and Allwood, JM and Heath, WP and Corscadden, KW (2000) Dynamic modeling of cross-directional actuators: implications for control. IEEE Transactions on Control Systems Technology, 8. pp. 667-675. ISSN 1063-6536

Jarrett, S and Allwood, JM (1999) Fast model of thermal camber evolution in metal rolling for online use. Ironmaking & Steelmaking, 26. pp. 439-448. ISSN 0301-9233

Duncan, SR and Allwood, JM and Garimella, SS (1998) The analysis and design of spatial control systems in strip metal rolling. IEEE Transactions on Control Systems Technology, 6. pp. 220-232. ISSN 1063-6536

Allwood, JM and Bryant, GF (1997) Fast modelling of roll stack behaviour for control applications. Journal of Mechanical Engineering Science, 211. pp. 373-386. ISSN 0954-4062

Allwood, JM and Stubbs, RE and Bryant, GF (1997) An efficient treatment of binary nonlinearities applied to elastic contact problems without friction. Journal of Engineering Mathematics, 31. pp. 81-98. ISSN 0022-0833

Book

Allwood, JM and Cullen, JM (2012) Sustainable Materials: with both eyes open. UIT Cambridge Ltd, Cambridge, pp. 1-384.

Book Section

Music, O and Allwood, JM (2015) Flexible asymmetric spinning. In: 60 Excellent Inventions in Metal Forming. UNSPECIFIED, pp. 173-178.

Allwood, JM (2014) Squaring the Circular Economy: The Role of Recycling within a Hierarchy of Material Management Strategies. In: Handbook of Recycling: State-of-the-art for Practitioners, Analysts, and Scientists. UNSPECIFIED, pp. 445-477.

Jackson, KP and Allwood, JM and Landert, M (2007) Incremental forming of sandwich panels. In: Key Engineering Materials. Trans Tech Publications, Stafa-Zurich, Switzerland, pp. 591-598.

Jackson, KP and Allwood, JM and Landert, M (2007) Incremental forming of sandwich panels. In: Key Engineering Materials. Transtech Publications Limited, Stafa-Zurich, Switzerland, pp. 591-598.

Stanistreet, TF and Allwood, JM (2004) Modelling steady-state elastoviscoplastic forming processes using the least squares finite element method. In: Materials Processing and Design: Modeling, Simulation and Applications, Pts 1 and 2. Aip Conference Proceedings, 712 . Springer, pp. 600-605.

Stanistreet, TF and Allwood, JM (2001) Convergence properties of an Eulerian elastoviscoplastic problem solved directly from a system of first order equations. In: Simulation of Materials Processing: Theory, Methods and Applications. Routledge, Oxford, UK, pp. 67-72.

Lee, JH and Allwood, JM (2000) Multi-agent based simulation of supply chain network dynamics. In: Complexity and Complex Systems in Industry. University of Warwick, Warwick, UK, pp. 16-29.

Lee, WL and Allwood, JM (2000) The evolution of worker skills for the solution of process interruptions in lean manufacturing. In: Complexity and Complex Systems in Industry. University of Warwick, Warwick, UK, pp. 210-221.

Allwood, JM (1995) A hybrid 2.5 dimensional elastoviscoplastic model of hot strip rolling for practical applications. In: Simulation of Materials Processing: Theory, Methods and Applications. Balkema, Rotterdam, Netherlands, pp. 519-526.

Conference or Workshop Item

Horton, P and Allwood, J and Cassell, P and Edwards, C and Tautscher, A (2018) Material Demand Reduction and Closed-Loop Recycling Automotive Aluminium. In: UNSPECIFIED pp. 1393-1398..

Cleaver, CJ and Allwood, JM (2017) Incremental ring rolling to create conical profile rings. In: 12th ICTP 2017, 2017-9-17 to 2017-9-22 pp. 1248-1253..

Azevedo, J and Serrenho, AC and Allwood, JM (2017) The deformation of metal powder particles: Hardness and microstructure. In: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom, 2017-9-17 to -- pp. 1200-1205..

Loukaides, EG and Allwood, JM (2016) Constrained design of sheet forming processes. In: MATEC Web of Conferences. 80. 24 Oct 2016, -- to --.

Allwood, J and Konadu, K and Mourao, Z and Lupton, R and Richards, K and Fenner, RA and Skelton, S and McMahon, R (2016) Integrated land water energy assessment using the Foreseer tool. In: European Sciences General Assembly, 2016-4-23 to 2016-4-28, Vienna.

Arthington, MR and Cleaver, C and Allwood, J and Duncan, S (2015) Measurement and control of variable geometry during ring rolling. In: UNSPECIFIED pp. 1448-1454..

Cawthorn, CJ and Loukaides, EG and Allwood, JM (2014) Comparison of analytical models for sheet rolling. In: UNSPECIFIED pp. 2451-2456..

Cooper, DR and Allwood, JM (2014) Influence of diffusion mechanisms in aluminium solid-state welding processes. In: UNSPECIFIED pp. 2147-2152..

Arthington, MR and Cleaver, C and Allwood, J and Duncan, S (2014) Real-time measurement of ring-rolling geometry using low-cost hardware. In: UNSPECIFIED pp. 603-608..

Polyblank, JA and Allwood, JM (2014) Support roller control and springback compensation in flexible Spinning. In: UNSPECIFIED pp. 2499-2504..

McBrien, M and Allwood, J (2013) Preliminary design and assessment of a novel electromagnetic edge dam for aluminium twin roll casting. In: UNSPECIFIED pp. 87-91..

Bambach, M and Russig, C and Hirt, G and Allwood, J (2011) The development of a new peen forming process - Rotary peen forming. In: UNSPECIFIED pp. 1126-1131..

Allwood, JM and Shouler, DR (2011) Design, Analysis and Application of a Novel Test for Sheet Metal Forming Limits under Non-Planar Stress States. In: UNSPECIFIED pp. 1595-1600..

Carruth, MA and Allwood, JM and Milford, RL (2011) Reducing CO2 Emissions through Lightweight Design and Manufacturing. In: UNSPECIFIED pp. 1632-1637..

Cullen, JM and Allwood, JM (2009) Engineering fundamentals of energy efficiency. In: R'09 Twin World Congress: Resource Management and Technology for Material and Energy Efficiency, 2009-9-14 to 2009-9-16, Davos, Switzerland.

Allwood, JM (2009) Steel, aluminium and carbon targets: alternative strategies for meeting the 2050 carbon emission targets for steel and aluminium. In: R'09 Twin World Congress: Resource Management and Technology for Material and Energy Efficiency, 2009-9-14 to 2009-9-16, Davos, Switzerland.

Cullen, JM and Allwood, JM (2009) Determining the best options for improving global energy efficiency. In: ISIE, 2009-6-21 to 2009-6-24, Lisbon, Portugal.

Allwood, JM and Cullen, JM and Milford, RL (2009) Non-destructive recycling: a latent opportunity for meeting the 2050 carbon targets in industry. In: ISIE, 2009-6-21 to 2009-6-24, Lisbon, Portugal.

Music, O and Allwood, JM (2008) A method for evaluation of flexible forming processes. In: 9th ICTP, 2008-9- to --, South Korea.

Shouler, DR and Allwood, JM (2008) A novel sample design for formabilitiy testing in pure shear. In: 9th ICTP, 2008-9- to --, South Korea.

Allwood, JM (2008) A structured search for new metal forming processes. In: 9th ICTP, 2008-9- to --, South Korea.

Jackson, KP and Allwood, JM and Launhard, M (2007) Incremental forming of sandwich panels. In: Shemet 2007, 2007-- to --, Palermo pp. 591-598..

Allwood, JM and Shouler, DR and Tekkaya, AE (2007) The increased forming limits of incremental sheet forming processes. In: Shermet 2007, 2007-- to --, Palermo pp. 621-628..

Raithatha, A and Duncan, SR and Jackson, KP and Allwood, JM (2007) Second order cone programming in modelling incremental deformation. In: American Control Conference, 2007-7-11 to 2007-7-13, New York, USA -..

Cullen, JM and Allwood, JM (2007) Fundamental analysis of carbon emissions for manufacturing with aluminium and steel. In: ISIE Conference 2007, 2007-6-17 to 2007-6-20, Toronto, Canada.

J M, A and S E, L and C, MDR and N M P, B (2007) Scenario analysis of the future sustainability of the supply of clothing and textiles to the U.K. In: ISIE 2007, 2007-6-17 to 2007-6-20, Toronto, Canada.

Raithatha, A and Duncan, S and Jackson, K and Allwood, J and IEEE, (2007) Second order cone programming in modeling incremental deformation. In: UNSPECIFIED pp. 1128-1133..

Counsell, TAM and Allwood, JM (2006) Un-printing toner: early results. In: 13th CIRP International Conference on Life Cycle Engineering, 2006-5-31 to 2006-6-2, Leuven, Belgium.

Raithatha, A and Jackson, K and Duncan, S and Allwood, J (2006) New method for modeling plastic deformation in incremental sheet form. In: UNSPECIFIED pp. 1037-1042..

Raithatha, A and Duncan, SR and Jackson, KP and Allwood, JM (2006) New method for modeling plastic deformation in incremental sheet forming. In: 2006 IEEE International Conference on Control Applications, CCA'06, 2006-10-4 to 2006-10-6, Munich, Germany pp. 1037-1042..

Raithatha, A and Jackson, K and Duncan, S and Allwood, J and IEEE, (2006) New method for modeling plastic deformation in incremental sheet forming. In: UNSPECIFIED pp. 633-638..

Stanistreet, TF and Allwood, JM (2005) Two simple models for exploring a novel flexible ring rolling process. In: Esaform 2005, 2005-4- to --, Cluj-Napoca, Romania pp. 1041-1044..

Allwood, JM and Houghton, NE and Jackson, KP (2005) The design of an incremental sheet forming machine. In: Shermet 2005, 2005-4- to --, Erlagen, Germany pp. 471-478..

Allwood, JM (2005) A periodic table of ring rolling processes. In: 8th International Conference on Technology of Plasticity (ICTP), 2005-10- to --, Verona, Italy -..

Allwood, JM (2005) Distributed localised production as a strategy for sustainable manufacturing. In: 4th International Conference on Design and Manufacture for Sustainable Development, 2005-7-12 to 2005-7-13, Newcastle, UK.

Counsell, TAM and Allwood, JM (2005) Rethinking office paper recycling. In: 4th International Conference on Design and Manufacture for Sustainable Development, 2005-7-12 to 2005-7-13, Newcastle, UK.

Allwood, JM and de Brito, M and Laursen, SE and Malvido, C (2005) Scenario analysis of the UK clothing and textiles sector. In: 4th International conference on Design and Manufacture for Sustainable Development, 2005-7-12 to 2005-7-13, Newcastle, UK.

Laursen, SE and Allwood, JM and de Brito, M and Malvido, C (2005) Sustainable recovery of products and materials - scenario analysis of the UK clothing and textile sector. In: 4th International Conference on Design and Manufacture for Sustainable Development, 2005-7-12 to 2005-7-13, Newcastle, UK.

Counsell, TAM and Allwood, JM (2005) The feasibility and environmental consequences of scale change in office paper production. In: International Conference on the International Society for Industrial Ecology (ISIE), 2005-6-12 to 2005-6-15, Stockholm, Sweden.

Allwood, JM and Houghton, NE and Jackson, KP (2005) The design of an incremental sheet forming machine. In: The 11th International Conference on Sheet Metal 2005, 2005-4-5 to 2005-4-8, Erlangen-Nuremberg, Germany pp. 471-478..

Allwood, JM (2005) Future developments in incremental sheet forming. In: 4th Chemnitz Car Body Colloquium, 2005-11-8 to 2005-11-9, Chemnitz, Germany.

Allwood, JM and Huang, Y and Barlow, CY (2005) Recycling scrap aluminium by cold bonding. In: 8th International Conference on Technology of Plasticity (ICTP), 2005-10-9 to 2005-10-13, Verona, Italy.

Allwood, JM (2003) Life cycle assessment and national energy usage. In: 2003 IEEE International Symposium on Industrial Electronics, ISIE'03, 2003-6-9 to 2003-6-11, USA.

Stanistreet, TF and Allwood, JM (2002) Solution of steady state deformation problems using a least squares finite element method applied to a system of first order equations. In: International Esaform Conference on Material Forming 2002, 2002-4-14 to 2002-4-17, Krakow, Poland pp. 51-54..

Allwood, JM and Duncan, SR (1996) Spatial decomposition as a tool for the evaluation and design of cross-directional control systems in sheet metal rolling. In: UKACC Control '96 Conference, 1996-9-2 to 1996-9-5, Exeter, UK pp. 1284-1289..

Allwood, JM (1996) Improved process control through on-line modelling. In: Control of Profile and Flatness, 1996-3-25 to 1996-3-27, Institute of Materials, Birmingham, Great Britain.

Allwood, JM (1995) Achieving manufacturing advantage through efficient mill preset. In: 2nd Annual Rolling Meeting, 1995-10-11 to --, Institute of Materials, London, Great Britain.

Schenk, M and Allwood, JM and Guest, SD Cold Gas-Pressure Folding of Miura-ori Sheets. In: International Conference on Technology of Plasticity, 2011-9-25 to 2011-10-30, Aachen, Germany. (Unpublished)

Russo, IM and Cleaver, C and Allwood, JM Haptic metal spinning. In: SheMet - International Conference on Sheet Metal, 2019-4-15 to 2019-4-17. (Unpublished)

Monograph

Allwood, J and Dunant, C and Lupton, R and Serrenho, A (2019) Steel Arising: Opportunities for the UK in a transforming global steel industry. Technical Report. UNSPECIFIED.

Konadu, DD and Fenner, RA and Richards, KS and Allwood, JM (2017) UK water-energy nexus under climate change: Key issues and priorities. Technical Report. UNSPECIFIED.

Konadu, DD and Mourao, ZS and Skelton, ACH and Richards, KS and Allwood, JM and Smith, P (2016) Modelling energy systems: How much bioenergy feedstock can be grown sustainably in the UK? Technical Report. UNSPECIFIED.

J M, A and S E, L and C, MDR and N M P, B (2006) Well dressed? The present and future sustainability of clothing and textiles in the United Kingdom. Technical Report. University of Cambridge - Institute for Manufacturing, Cambridge, UK.

Allwood, JMA and Skelton, ACH Industrial metamorphosis: a response to the green paper on building our industrial strategy. Technical Report. UNSPECIFIED. (Unpublished)

This list was generated on Fri Aug 23 16:19:49 2019 BST.