Department of Engineering

Dr James Ward - Publications

Number of items: 95.

Article

O'Kelly, E and Pirog, S and Ward, J and Clarkson, PJ (2020) Ability of fabric face mask materials to filter ultrafine particles at coughing velocity. BMJ Open, 10. e039424-e039424.

O'Kelly, E and Arora, A and Pearson, C and Ward, J and Clarkson, PJ (2020) Performing Qualitative Mask Fit Testing without a Commercial Kit: Fit Testing Which can be Performed at Home and at Work. Disaster Med Public Health Prep. pp. 1-12.

Kaya, GK and Ward, J and Pearman, A and Clarkson, J (2020) Evaluation of the formal risk assessment practice in hospitals in England. Journal of Risk Research. ISSN 1366-9877

Lame, G and Liberati, E and Burt, J and Draycott, T and Winter, C and Ward, J and Dixon-Woods, M (2019) IMproving the practice of intrapartum electronic fetal heart rate MOnitoring with cardiotocography for safer childbirth (the IMMO programme): Protocol for a qualitative study. BMJ Open, 9. e030271-. ISSN 2044-6055

Kaya, GK and Ward, J and Clarkson, J (2019) A Review of Risk Matrices Used in Acute Hospitals in England. Risk Analysis, 39. pp. 1060-1070. ISSN 0272-4332

Simsekler, MCE and Kaya, GK and Ward, JR and Clarkson, PJ (2019) Evaluating inputs of failure modes and effects analysis in identifying patient safety risks. International Journal of Health Care Quality Assurance, 32. pp. 191-207. ISSN 0952-6862

Early, F and Wilson, PM and Deaton, C and Wellwood, I and Haque, HW and Fox, SE and Yousaf, A and Meysner, OD and Ward, JR and Singh, SJ and Fuld, JP (2019) Pulmonary rehabilitation referral and uptake from primary care for people living with COPD: a mixed-methods study. ERJ Open Res, 6. ISSN 2312-0541

Early, F and Wilson, P and Deaton, C and Wellwood, I and Dickerson, T and Ward, J and Jongepier, L and Barlow, R and Singh, SJ and Benson, J and Brimicombe, J and Kim, L and Haque, H and Fuld, J (2019) Developing an intervention to increase REferral and uptake to pulmonary REhabilitation in primary care in patients with chronic obstructive pulmonary disease (the REsTORE study): Mixed methods study protocol. BMJ Open, 9. e024806-.

Kaya, G and Ward, JR and Clarkson, PJ (2018) A framework to support risk assessment in hospitals. International Journal for Quality in Health Care, 2018. pp. 393-401. ISSN 1464-3677 (Unpublished)

Simsekler, MCE and Ward, JR and Clarkson, PJ (2018) Design for Patient Safety: A Systems-based Risk Identification Framework. Ergonomics, 61. pp. 1046-1064. (Unpublished)

Clarkson, J and Dean, J and Ward, J and Komashie, A and Bashford, T (2018) A systems approach to healthcare: from thinking to -practice. Future Healthc J, 5. pp. 151-155. ISSN 2514-6645

Chatzimichailidou, MM and Ward, JR and Horberry, T and Clarkson, PJ (2017) A Comparison of the Bow-Tie and STAMP Approaches to Reduce the Risk of Surgical Instrument Retention. Risk Analysis, 38. pp. 978-990.

Jun, GT and Canham, A and Altuna-Palacios, A and Ward, JR and Bhamra, R and Rogers, S and Dutt, A and Shah, P (2017) A participatory systems approach to design for safer integrated medicine management. Ergonomics, 61. pp. 48-68.

Simsekler, MCE and Ward, JR and Clarkson, PJ (2017) Evaluation of System Mapping Approaches in Identifying Patient Safety Risks. International Journal for Quality in Health Care, 30. pp. 227-233. (Unpublished)

Early, F and Wellwood, I and Kuhn, I and Dickerson, T and Ward, JR and Brimicombe, J and Deaton, C and Fuld, J (2016) Interventions to increase referral to and uptake of Pulmonary Rehabilitation programmes for people with Chronic Obstructive Pulmonary Disease (COPD): A systematic review.

Simsekler, MCE and Card, AJ and Ruggeri, K and Ward, JR and Clarkson, PJ (2015) A comparison of the methods used to support risk identification for patient safety in one UK NHS foundation trust. Clinical Risk, 21. pp. 37-46. ISSN 1356-2622

Simsekler, MCE and Card, AJ and Ward, JR and Clarkson, PJ (2015) Trust-level risk identification guidance in the NHS East of England. Int J Risk Saf Med, 27. pp. 67-76.

Card, AJ and Ward, JR and Clarkson, PJ (2015) Rebalancing risk management--Part 2: The Active Risk Control (ARC) Toolkit. Journal of healthcare risk management : the journal of the American Society for Healthcare Risk Management, 34. pp. 4-17. ISSN 1074-4797

Card, AJ and Ward, JR and Clarkson, PJ (2014) Generating Options for Active Risk Control (GO-ARC): introducing a novel technique. Journal for healthcare quality : official publication of the National Association for Healthcare Quality, 36. pp. 32-41.

Horberry, T and Teng, Y-C and Ward, JR and Clarkson, PJ (2014) Employing Usability Heuristics to Examine the Issue of Guidewire Retention after Surgery. Ergonomics Australia, 1. pp. 1-5. ISSN 1033-1875

Card, AJ and Ward, JR and Clarkson, PJ (2014) Rebalancing risk management--part 1: The Process for Active Risk Control (PARC). J Healthc Risk Manag, 34. pp. 21-30. ISSN 1074-4797

Horberry, T and Teng, YC and Ward, J and Patil, V and Clarkson, PJ (2014) Guidewire retention following central venous catheterisation: A human factors and safe design investigation. International Journal of Risk and Safety in Medicine, 26. pp. 23-37. ISSN 0924-6479

Card, AJ and Simsekler, MCE and Clark, M and Ward, JR and Clarkson, PJ (2014) Use of the Generating Options for Active Risk Control (GO-ARC) Technique can lead to more robust risk control options. International Journal of Risk and Safety in Medicine, 26. pp. 199-211. ISSN 0924-6479

Goodman-Deane, J and Ward, J and Hosking, I and Clarkson, PJ (2014) A comparison of methods currently used in inclusive design. Applied Ergonomics, 45. pp. 886-894. ISSN 0003-6870

Card, AJ and Ward, JR and Clarkson, PJ (2013) Trust-Level Risk Evaluation and Risk Control Guidance in the NHS East of England. Risk Analysis. ISSN 0272-4332

Card, AJ and Harrison, H and Ward, JR and Clarkson, PJ (2012) Using prospective hazard analysis to assess an active shooter emergency operations plan. Journal of Healthcare Risk Management, 31. pp. 34-40.

Card, AJ and Ward, JR and Clarkson, PJ (2012) Beyond FMEA: The structured what-if technique (SWIFT). Journal of Healthcare Risk Management, 31. pp. 23-29.

Card, AJ and Ward, JR and Clarkson, PJ (2012) Successful risk assessment may not always lead to successful risk control: A systematic literature review of risk control after root cause analysis. Journal of Healthcare Risk Management, 31. pp. 6-12.

Card, AJ and Ward, JR and Clarkson, PJ (2012) Getting to zero: evidence-based healthcare risk management is key. J Healthc Risk Manag, 32. pp. 20-27.

Robinson, S and Ward, J and Baglin, T and Broster, S and Heesom-Duff, C and Pascoe, G and Ahluwalia, J (2012) The Clinical Area Safety Assessment, a Peer Review of Safety across an Acute Trust. Journal of Hospital Administration, 2. p. 27. ISSN 1927-6990 (Unpublished)

Vincent, C and Ward, J and Langdon, P (2012) Unravelling complex systems. The Ergonomist, 506. pp. 12-13.

Ticehurst, A and Ward, JR and Clarkson, PJ (2010) Barriers to design in healthcare. Australasian Medical Journal, 3. pp. 570-579. ISSN 1836-1935

Ward, JR and Buckle, P and Clarkson, PJ (2010) Designing packaging to support the safe use of medicines at home. Applied Ergonomics, 41. pp. 682-694. ISSN 0003-6870

Buckle, P and Clarkson, PJ and Coleman, R and Bound, J and Ward, JR and Brown, J (2010) Systems mapping workshops and their role in understanding medication errors in healthcare. Applied Ergonomics, 41. pp. 645-656. ISSN 0003-6870

Jun, GC and Ward, JR and Clarkson, PJ (2010) Systems modelling approaches to the design of safe healthcare delivery: ease of use and usefulness perceived by healthcare workers. Ergonomics, 53. pp. 829-847. ISSN 0014-0139

Ward, JR and Watkinson, J and Clarkson, PJ and Buckle, P and Anderson, J and Jeffcott, S (2009) Assessing the impact of drug packaging and labelling on patients. Hospital Pharmacy Europe. pp. 68-69. ISSN 1477-1896

Jun, GC and Ward, JR and Morris, ZS and Clarkson, PJ (2009) Health care process modelling: which method when? International Journal for Quality in Health Care, 21. pp. 214-224. ISSN 1353-4505

Buckle, P and Clarkson, PJ and Coleman, R and Ward, JR and Anderson, J (2006) Patient safety, systems design and ergonomics. Applied Ergonomics, 37. pp. 491-500. ISSN 0003-6870

Hinrichs, S and Ward, JR (2006) The safe road TO SALES. On Target.

Clarkson, PJ and Buckle, P and Coleman, R and Stubbs, D and Ward, JR and Jarrett, JP and Lane, R and Bound, J (2004) Design for patient safety: a review of the effectiveness of design in the UK health service. Journal of Engineering Design, 15. pp. 123-140. ISSN 0954-4828

Ward, JR and Clarkson, PJ (2004) An analysis of medical device-related errors: prevalence and possible solutions. Journal of Medical Engineering and Technology, 28. pp. 2-21. ISSN 0309-1902

O'Kelly, E and Pirog, S and Ward, J and Clarkson, PJ Informing Homemade Emergency Facemask Design: The Ability of Common Fabrics to Filter Ultrafine Particles. medRxiv. (Unpublished)

Book

Buckle, P and Clarkson, PJ and Coleman, R and Lane, R and Stubbs, D and Ward, JR and Jarrett, J and Bound, J (2003) Design for patient safety: A system-wide design-led approach to tackling patient safety in the NHS. Department of Health Publications, London, UK.

Clarkson, PJ and Buckle, P and Coleman, R and Stubbs, D and Ward, J and Jarrett, J and Lane, R and Bound, J (2003) Design for patient safety: a scoping study to identify how the effective use of design could help to reduce medical accidents. University of Cambridge.

Ward, JR and Clarkson, PJ and Bishop, D and Fox, S (2002) Good design practice for medical devices and equipment - design verification. Institute of Manufacturing.

Book Section

Jun, GJ and Altuna, A and Ward, JR and Bhamra, R and Rogers, S and Dutt, A and Shah, P (2014) Challenges in applying human factors approaches to health service design. In: Human Factors In Organizational Design And Management – xi: Nordic Ergonomics Society Annual Conference – 46. UNSPECIFIED, pp. 487-492.

Vincent, CJ and Ward, JR and Langdon, P (2012) How do they do it? Inclusive techniques to support systems mapping from healthcare and beyond. In: Contemporary Ergonomics and Human Factors 2012 Proceedings of the international conference on Ergonomics & Human Factors 2012, Blackpool, UK, 16-19 April 2012. CRC Press, pp. 331-332.

Ward, JR and Clarkson, PJ (2006) Human factors engineering and the design of medical devices. In: Handbook of Human Factors and Ergonomics in Healthcare and Patient Safety. Lawrence Erlbaum, Mahwah, N. J., USA, pp. 367-382.

Ward, JR and Clarkson, PJ (2001) Device-related medical error - current practice and solutions. In: The Drug Delivery Companies Report 2001. PharmaVentures Ltd, pp. 58-63.

Conference or Workshop Item

Kaya, GK and Canbaz, HT and Ward, J and Clarkson, PJ (2016) Evaluation of risk management practices: data analysis of NHS England hospitals. In: Global Joint Conference on Industrial Engineering and Its Application Areas, 2016-7-14 to 2016-7-15, istanbul pp. 483-489..

Kaya, GK and Canbaz, HTK and Simsekler, MCE and Ward, J and Clarkson, PJ (2016) Risk management in hospital settings: understanding and improving the current practice. In: Global Joint Conference on Industrial Engineering and Its Application Areas, 2016-7-14 to 2016-5-15, Istanbul pp. 83-90..

Ward, JR and Chatzimichailidou, MM and Horberry, T and Teng, Y-C and Clarkson, PJ (2016) Guidewire Retention after Central Venous Catheterisation: Prevention and Mitigation using Bow-Tie Analysis. In: Contemporary Ergonomics and Human Factors 2016, 2016-4-19 to 2016-4-21, Daventry, UK pp. 95-99..

Teng, YC and Ward, J and Horberry, T and Clarkson, PJ and Patil, V (2015) Retained surgical instruments: Using technology for prevention and detection. In: UNSPECIFIED pp. 289-298..

Teng, YC and Ward, J and Horberry, T and Patil, V and Clarkson, J (2014) Retained guidewires in central venous catheterisation: An analysis of omission errors. In: UNSPECIFIED pp. 211-214..

Ward, J and Teng, YC and Horberry, T and Clarkson, PJ (2013) Healthcare human reliability analysis - By heart. In: UNSPECIFIED pp. 287-288..

Horberry, T and Teng, YC and Ward, J and Clarkson, PJ (2013) Safe design of medical equipment: Employing usability heuristics to examine the issue of guidewire retention after surgery. In: UNSPECIFIED.

Vincent, CJ and Ward, J and Langdon, P (2012) Workshop: How do they do it? Inclusive techniques to support systems mapping from healthcare and beyond. In: UNSPECIFIED pp. 331-332..

Beniuk, C and Ward, JR and Clarkson, PJ (2011) Applying inclusive design principles in the assessment of healthcare services. In: UNSPECIFIED.

Card, AJ and Ward, J and Clarkson, PJ (2011) Risk control after root cause analysis: A systematic literature review. In: UNSPECIFIED pp. 639-644..

Jun, GC and Ward, JR and Clarkson, PJ (2008) Process modelling approaches for healthcare hazard analysis. In: Improving Patient Safety (IPS 2008), 2008-7-16 to 2008-7-18, Cambridge, UK.

Anderson, J and Colligan, L and Buckle, P and Ward, JR and Clarkson, PJ (2008) Proactive risk assessment in healthcare: how do experts select the best methods? In: Healthcare Systems Ergonomics and Patient Safety, HEPS 2008, 2008-6-25 to 2008-6-28, Strasbourg, France.

Ward, JR and Lyons, MN and Anderson, J and Barclay, S and Buckle, P and Clarkson, PJ (2007) Investigating the use of proactive hazard analysis in the UK. In: Safety Research: Shaping the European Agenda, 2007-9-24 to 2007-9-26, Porto, Portugal.

Anderson, J and Buckle, P and Ward, JR and Lyons, MN and Clarkson, PJ and Barclay, S (2007) Using HFMEA in primary care. In: Patient Safety Research: Shaping the European Agenda, 2007-9-24 to 2007-9-26, Porto, Portugal.

Ward, JR and Lyons, MN and Barclay, S and Anderson, J and Buckle, P and Clarkson, PJ (2007) Using fault tree analysis (FTA) in healthcare: a case study of repeat prescribing in primary care. In: Patient Safety Research: Shaping the European Agenda, 2007-9-24 to 2007-9-26, Porto, Portugal.

Lyons, MN and Ward, JR and Barclay, S and Anderson, J and Buckle, P and Clarkson, PJ (2007) The feasibility of applying a systematic human error reduction and prediction approach (SHERPA) in healthcare: a case study of repeat prescribing in primary care. In: Patient Safety Research: Shaping the European Agenda, 2007-9-24 to 2007-9-26, Porto, Portugal.

Jafri, T and Lyons, MN and Ward, JR and Clarkson, PJ (2007) A systems approach to medication error. In: Patient Safety Research: Shaping the European Agenda, 2007-9-24 to 2007-9-26, Porto, Portugal.

Buckle, P and Anderson, J and Ward, J and Jeffcott, S and Snadden, C and Gleeson, A and Lim, R and Wadsworth, P (2007) Patient safety: an ergonomics study of innovative design in pharmaceutical packaging. In: The Ergonomics Society Annual Conference, 2007-4-17 to 2007-4-19, Nottingham, UK pp. 457-462..

Jun, GTJ and Ward, JR and Clarkson, PJ (2007) An approach to process modelling for healthcare system safety improvement. In: International Forum on Quality and Safety in Health Care, 2007-4- to --, Barcelona, Spain.

Wittner, B and Ward, JR and Jeffcott, S and Clarkson, PJ (2006) Alarm design for medical devices. In: The Institute of Physics and Engineering in Medicine (IPEM) Annual Scientific Meeting 2006, 2006-9-5 to 2006-9-8.

Hinrichs, S and Ward, JR and Dickerson, T and Clarkson, PJ (2006) A systems approach to improving patient safety through procurement. In: Institute of Physics and Engineering in Medicine (IPEM) Annual Scientific Meeting, 2006-9-6 to 2006-9-8, Cambridge, UK.

Gupta, SP and Ward, JR and Jeffcott, S and Clarkson, PJ (2006) Increasing use of medical devices in the home environment. In: Institute of Physics and Engineering in Medicine (IPEM) Annual Scientific Meeting, 2006-11-27 to 2006-11-28, Cambridge, UK.

Jun, GC and Ward, JR and Clarkson, PJ (2005) Mapping the healthcare process in order to design for patient safety. In: The 15th International Conference on Engineering Design (ICED'05), 2005-8-15 to 2005-8-18 pp. 353-354..

Buckle, P and Clarkson, PJ and Coleman, R and Kennedy martin, M and Stubbs, D and Ward, JR (2005) Systems design and patient safety. In: Healthcare Systems Ergonomics and Patient Safety, HEPS 2005, 2005-3-31 to 2005-4-2, Florence, Italy pp. 253-255..

Jun, GC and Ward, JR and Clarkson, PJ (2005) Comparison of national reporting systems for patient safety: UK's NRLS; US's Medwatch. In: The 10th European Forum on Quality Improvement in Health Care, 2005-4-13 to 2005-4-15, London, UK.

Clarkson, PJ and Buckle, P and Coleman, R and Stubbs, D and Ward, JR and Jarrett, J and Lane, R and Bound, J (2004) Design for patient safety: A scoping study to identify how the effective use of design could help to reduce medical accidents. In: UNSPECIFIED.

Stubbs, D and Buckle, P and Lane, R and Clarkson, PJ and Coleman, R and Kennedy martin, M and Ward, JR (2004) Equipment design and medical errors: the experience of nurses. In: The 15th Triennial Congress of the International Ergonomics Association and the 7th Joint Conference of Ergonomics Society of Korea, 2004-8-24 to 2004-8-29 pp. 347-352..

Ward, JR and Clarkson, PJ and Buckle, P and Harris, W (2004) The packaging and labelling of solid oral medicine using oral Methotrexate as an example. In: The 7th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2004); Vol. 3, 2004-7-19 to 2004-7-22 pp. 459-468..

Clarkson, PJ and Buckle, P and Stubbs, D and Coleman, R and Ward, JR and Kennedy martin, M (2004) Design for patient safety: a review of the effectiveness of design in the UK health service. In: The 8th International Design Conference (Design 2004), 2004-5-18 to 2004-5-20 pp. 983-988..

Coleman, R and Clarkson, PJ and Ward, JR and Buckle, P and Stubbs, D (2004) Inclusive design in practice: designing for patient safety. In: Designing for the 21st Century III, 2004-12-8 to 2004-12-12, Rio de Janeiro, Brazil.

Buckle, P and Clarkson, PJ and Coleman, R and Kennedy martin, M and Lane, R and Stubbs, D and Ward, JR (2003) Designing for patient safety : how the effective use of design could help to reduce medical accidents. In: XV Triennial Congress of the International Ergonomics Association and the 7th Joint Conference of Ergonomics Society of Korea /Japan Ergonomics Society, 2003-8-24 to 2003-8-29, Seoul, Korea.

Ward, JR and Shefelbine, S and Clarkson, PJ (2003) Requirements capture for medical device design. In: The 14th International Conference on Engineering Design (ICED'03), 2003-8-19 to 2003-8-21 pp. 65-66..

Ward, JR and Clarkson, PJ (2001) Design verification support for the medical device industry. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 211-218..

Ward, JR and Clarkson, PJ and Bracewell, RH (1999) Supporting medical device verification. In: The 12th International Conference on Engineering Design (ICED'99); Vol. 1, 1999-8-24 to 1999-8-26 pp. 429-432..

Clarkson, PJ and Ward, J and Buckle, P and Stubbs, D and Coleman, R Designing for Patient Safety: A Review of the Effectiveness of Design in the UK Health Service. In: ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2004-9-28 to 2004-10-2. (Unpublished)

Chatzimichailidou, MM and Ward, JR and Clarkson, PJ Leading safety indicators: Towards determining the enhancement or degradation of the level of patient safety in healthcare. In: Human Factors in Complex Systems, 2016, 2016-6-7 to 2016-6-8, Nottingham, UK. (Unpublished)

Monograph

Clarkson, PJ and Ward, JR and Berman, J and Buckle, P and Lim, R (2016) Prospective Hazard Analysis. Technical Report. Engineering Department, Cambridge University, Cambridge, UK.

Goodman Deane, J and Ward, JR and Hosking, I and Clarkson, PJ (2010) Comparison of the usability of three autoinjectors. Technical Report. Engineering Department, Cambridge University, Cambridge, UK.

Ward, JR and Clarkson, PJ and Buckle, P and Berman, J and Lim, R and Jun, GT (2010) Prospective hazard analysis: tailoring prospective methods to a healthcare context. Technical Report. Patient Safety Research Portfolio.

Buckle, P and Anderson, J and Ward, JR and Jeffcott, S (2006) Patient safety: the benefits of Almus pharmaceutical packaging. Technical Report. The Design for Patient Safety Initiative (Universities of Surrey and Cambridge).

Ward, JR and Clarkson, PJ and Buckle, P and Coleman, R (2004) Design for patient safety: current NHS activities in meeting the DPS approach. Technical Report. University of Cambridge.

Ward, JR and Clarkson, PJ and Buckle, P (2004) The packaging and labelling of solid oral medicines: a study to identify the needs and functionality for safe administration of solid oral medicines using oral Methotrexate as an example. Technical Report. University of Cambridge Engineering Design Centre / National Patient Safety Agency, Cambridge, UK.

Ward, JR and Clarkson, PJ (2003) Medical device-related errors in the UK and USA. Technical Report. Cambridge University Engineering Department, Cambrudge, UK.

Ward, JR and Clarkson, PJ (2003) Reducing medical device-related errors through human factors engineering. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ward, JR (1998) A methodology for supporting medical device verification. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Thesis

Ward, JR (2002) Design verification in the medical device industry. PhD thesis, UNSPECIFIED.

This list was generated on Tue Sep 29 08:42:07 2020 BST.