Department of Engineering

Dr Nick Atkins - Publications

Number of items: 34.

Article

Young, AM and Atkins, NR and Clark, CJ and Germain, G (2019) An Unsteady Pressure Probe for the Measurement of Flow Unsteadiness in Tidal Channels. IEEE Journal of Oceanic Engineering. pp. 1-19. ISSN 0364-9059

Coschignano, A and Atkins, N and Babinsky, H and Serna, J (2019) Effect of Reynolds number on a normal shock wave-transitional boundary-layer interaction over a curved surface. Experiments in Fluids, 60. 185-. ISSN 0723-4864

Savov, SS and Atkins, NR and Uchida, S (2017) A Comparison of Single and Double Lip Rim Seal Geometries. Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, 139. ISSN 0742-4795

Coull, JD and Atkins, NR (2015) The influence of boundary conditions on tip leakage flow. Journal of Turbomachinery, 137. ISSN 0889-504X

Coull, JD and Atkins, NR and Hodson, HP (2014) Winglets for improved aerothermal performance of high pressure turbines. Journal of Turbomachinery, 136. ISSN 0889-504X

Dixon, JA and Valencia, AG and Bauknecht, A and Coren, D and Atkins, N (2013) Heat Transfer in Turbine Hub Cavities Adjacent to the Main Gas Path. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135. ISSN 0889-504X

Atkins, NR (2013) Investigation of a radial-inflow bleed as a potential for compressor clearance control. Proceedings of the ASME Turbo Expo, 3.

Coren, DD and Atkins, NR and Turner, JR and Eastwood, DE and Davies, S and Childs, PRN and Dixon, JA and Scanlon, TJ (2013) An Advanced Multiconfiguration Stator Well Cooling Test Facility. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135. ISSN 0889-504X

Coren, DD and Atkins, NR and Turner, JR and Eastwood, DE and Davies, S and Child, PRN and Dixon, JA and Scanlon, TJ (2012) An Advanced Multiconfiguration Stator Well Cooling Test Facility. Journal of Turbomachinery, 134. ISSN 0889-504X

Eastwood, D and Coren, DD and Long, CA and Atkins, NR and Childs, PRN and Scanlon, TJ and Guijarro-Valencia, A (2012) Experimental Investigation of Turbine Stator Well Rim Seal, Re-Ingestion and Interstage Seal Flows Using Gas Concentration Techniques and Displacement Measurements. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 134. ISSN 0742-4795

Valencia, AG and Dixon, JA and Da Soghe, R and Facchini, B and Smith, PEJ and Muñoz, J and Eastwood, D and Long, CA and Coren, DD and Atkins, NR (2012) An investigation into numerical analysis alternatives for predicting reingestion in turbine disc rim cavities. Proceedings of the ASME Turbo Expo, 4. pp. 2025-2035.

Atkins, NR and Ainsworth, RW (2012) Turbine Aerodynamic Performance Measurement Under Nonadiabatic Conditions. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 134. ISSN 0889-504X

Atkins, NR and Thorpe, SJ and Ainsworth, RW (2012) Unsteady Effects on Transonic Turbine Blade-Tip Heat Transfer. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 134. ISSN 0889-504X

Eastwood, D and Coren, D and Long, CA and Atkins, NR and Childs, PRN and Scanlon, TJ and Guijarro-Valencia, A (2011) Experimental investigation of turbine stator well rim seal, reingestion and interstage seal flows using gas concentration techniques and displacement measurements. Proceedings of the ASME Turbo Expo, 5. pp. 859-870.

Coren, DD and Atkins, NR and Long, CA and Eastwood, D and Childs, PRN and Guijarro-Valencia, A and Dixon, JA (2011) The influence of turbine stator well coolant flow rate and passage configuration on cooling effectiveness. Proceedings of the ASME Turbo Expo, 5. pp. 981-992.

Wheeler, APS and Atkins, NR and He, L (2011) Turbine Blade Tip Heat Transfer in Low Speed and High Speed Flows. J TURBOMACH, 133. -. ISSN 0889-504X

Coren, DD and Atkins, NR and Turner, JR and Eastwood, DE and Davies, S and Childs, PRN and Dixon, J and Scanlon, TS (2010) An advanced multi-configuration stator well cooling test facility. Proceedings of the ASME Turbo Expo, 4. pp. 1259-1270.

Wheeler, APS and Atkins, NR and He, L (2009) Turbine blade tip heat transfer in low speed and high speed flows. Proceedings of the ASME Turbo Expo, 3. pp. 349-359.

Thomas, GA and Atkins, NR and Thorpe, SJ and Ainsworth, RW and Harvey, NW (2007) The Effect of a Casing Step on the Over-Tip Aerothermodynamics of a Transonic HP Turbine Stage. ASME Conference Proceedings, 2007. 597-608-597-608.

Atkins, NR and Miller, RJ and Ainsworth, RW (2004) The development of aerodynamic performance measurements in a transient test facility. Proceedings of the ASME Turbo Expo 2004, 5 B. pp. 1325-1338.

Conference or Workshop Item

Savov, SS and Atkins, NR (2017) A Rim seal ingress model based on turbulent transport. In: UNSPECIFIED.

Young, AM and Guion, R and Atkins, N and Costan, J (2016) NOVEL USAGE OF FIVE-HOLE PROBES: TIDAL CHANNEL TURBULENCE MEASUREMENTS. In: XXIII Biannual Symposium on Measuring Techniques in Turbomachinery, 2016-8-31 to 2016-9-1.

Savov, SS and Atkins, NR and Uchida, S (2016) Comparison of single and double lip rim seal geometry. In: UNSPECIFIED.

Amirante, D and Sun, Z and Chew, JW and Hills, NJ and Atkins, NR (2016) Modeling of compressor drum cavities with radial inflow. In: UNSPECIFIED.

Atkins, NR and Kanjirakkad, V (2014) Flow in a rotating cavity with axial throughflow at engine representative conditions. In: UNSPECIFIED.

Coull, JD and Atkins, NR and Hodson, HP (2014) High efficiency cavity winglets for high pressure turbines. In: UNSPECIFIED.

Coull, JD and Atkins, NR (2013) The influence of boundary conditions on tip leakage flow. In: UNSPECIFIED.

Dixon, JA and Guijarro, A and Bauknecht, A and Coren, D and Atkins, N (2010) Heat transfer in turbine hub cavities adjacent to the main gas path. In: UNSPECIFIED pp. 943-954..

Regan, NJ and Atkins, NR and Long, CA and Childs, PRN and Hutcheson, PS and Hart, KJ and ASME, (2009) AN EXPERIMENTAL STUDY OF SPRAYS IN CROSS FLOW REPRESENTATIVE OF GAS TURBINE ENGINE SECONDARY AIR SYSTEMS. In: UNSPECIFIED pp. 133-143..

Atkins, NR and Thorpe, SJ and Ainsworth, RW and ASME, (2008) UNSTEADY EFFECTS ON TRANSONIC TURBINE BLADE-TIP HEAT TRANSFER. In: UNSPECIFIED pp. 1025-1038..

Atkins, NR and Ainsworth, RW and Harvey, NW (2007) Aerodynamic performance measurement in a fully scaled transient turbine test facility. In: UNSPECIFIED pp. 481-492..

Atkins, NR and Ainsworth, RW (2005) The measurement of shaft power in a fully scaled transient turbine test facility. In: UNSPECIFIED pp. 771-782..

Atkins, NR and Miller, RJ and Ainsworth, RW (2004) The development of aerodynamic performance measurements in a transient test facility. In: ASME Turbo Expo - Power for Land, Sea and Air, 2004-6-14 to 2004-6-17, Vienna, Austria.

Coull, JD and Atkins, NR and Hodson, HP Winglets for Improved Aerothermal Performance of High Pressure Turbines. In: ASME Turbo Expo 2013, 2013-6-3 to 2013-6-7, San Antonio. (Unpublished)

This list was generated on Thu Oct 22 06:41:40 2020 BST.